Why one of the many images will save not the same size?

Similar Questions

• before I unpack my 7520 one.how while many pages will be it scan at the same time

  before I unpack my 7520 one.how while many pages will be it scan at the same time

  Maybe a maximum of 50 sheets of paper are loaded in the ADF feeder at the same time.

• Why one of the pages of the site appears as the index in my reports?

  Why one of the pages of the site appears as the index in my reports?

  

  Hi morganagordon,

  Please share the URL of your site.

  Also, check the Page properties of the pages of your file of Muse for the name of the page, page title and the name of the pages.

  To verify the same, you will need to open the file with Muse, switch to the view of the Plan, which is located on every page of thumbnails, select "Page Properties" and select the Options tab.

  Concerning

  Sonam

• not the same size of the image when I import it

  I want to import an e imagexactly the same size he is, but I can't do...

  someone at - it an idea? Thank you.

  I'm using flash pro cs5.

  Hi Jakob,

  Try this first-

  (1) Insert the following code into a new document and check the system screenDPI:

  import flash.system.Capabilities;

  trace ("Capabilities.screenDPI:" + Capabilities.screenDPI);

  (2) If for example, the output is 72 dpi, when you import an image, it seems that Flash is resized to match what he thinks it's the resolution of the screen and in this case, its 72 dpi. So if the image has a higher resolution, he dimensionnera it down.

  You can try the following-

  Create an image in Photoshop with say 300 dpi. Create a new one with a 72 dpi. Import both of them in Flash. The first image will be scaled down, but the second image retains its original size.

  The solution is to make sure the graphic that you import is 72 dpi resolution.

  You can use an image editor like IrfanView to check or adjust the DPI of the image that you use.

  Let me know if it helps.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team.

• How do I know if I have more than one of the same song in my library, and if I do how do I remove it without deleting both copies?

  Original title: Windows 7 Media Player

  How do I know if I have more than one of the same song in my library, and if I do how do I remove it without deleting both copies?

  Hello

  Duplicates would be revealed by the observation. If found you are probably followed the same
  record twice.

  Add items to the Windows Media Player library - see the monitoring records - and delete a folder
  controlled by the player.
  http://Windows.Microsoft.com/en-us/Windows7/add-items-to-the-Windows-Media-Player-library

  Remove items from the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/remove-items-from-the-Windows-Media-Player-library

  Add or edit media information in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-Player

  The Windows Media Player library: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-library-frequently-asked-questions

  Getting started with Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Player#section_4

  --------------------------------------------------------

  The library may be corrupted if necessary, after the media library - advanced - restore tools above...
  Reset the library will result in the loss of all of the counties of game and probably both sides.

  ================================================================

  If you think there is duplicate in separate folders files:

  Here are a few utilities to help, be sure to remove duplicates once and good
  folder. If If doubt copy the file to another folder, delete and then check WMP.

  Here are several free utilities and they have all their benefits and their methods.

  Auslogics Duplicate File Finder is the MD5 search engine that allows you to find duplicate
  files content, without worrying other matching criteria. It would be useful, for example, when two identical
  MP3 tracks or video files
  have different names
  http://www.Auslogics.com/en/software/duplicate-file-Finder

  Easy Duplicate Finder - find and delete the duplicate - free
  http://www.easyduplicatefinder.com/

  AntiTwin - Installer and Portable versions - search files in double or similar-
  same binary - free
  http://www.Joerg-Rosenthal.com/en/antitwin/

  Fast Duplicate File Finder-Free - quickly find all the files in a folder and its subfolders duplicate
  http://www.Mindgems.com/products/fast-duplicate-file-Finder/fast-duplicate-file-Finder-about.htm

  Duplicate File Finder - Smart Port Forwarding - TCP Port Scanner - TCP Tunnel Port-
  Multi-minuterie-free
  http://www.brooksyounce.com/

  Duplicate File Finder software (pictures, mp3, iTunes)
  http://www.Moleskinsoft.com/

  SearchMyFiles - free - an alternative to the "Search for files and folders" module standard
  Windows. It allows you to easily search files in your system by wildcard, by last modification/creation/last accessed: time, by file attributes, by the content of a file (text or binary search),
  and by the size of the file. SearchMyFiles allows you to make a very specific search that cannot be
  done with Windows search.
  http://www.NirSoft.NET/utils/search_my_files.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• In Illustrator Image Trace, how "place" an image at the same size as the PS file?

  If I work in Photoshop in 300 dpi and I want to insert a border around a form, with the help of Illustrator to create the plan, such as it is, it is impossible to do that. Go all the way back to Streamline (someone he remembers Streamline?), if you placed a picture of the automatic route, vectorization, or, now, 'Trace of Image', the placed image would be just that a copy of the same size of the file original raster. Not now. Now, placing an illustration for tracing involves waving a positioning reticle identified as '1:1 ' with which you can make the image is traced back to whatever size you want, and there is no ghosting or model to help size with reliability. At least, as far as I can tell. Am I missing something here? I went through the files using Illustrator and a copy of the 'Illustrator CC' of Weinmann. Nothing. It seems as if the Image monitoring mission is no trace, but to resize, so that the vectorized image likeness no size-the original.   Can anyone help?

  Birck,

  The value of W (as is the value of H) is in pixels if the selected unit, and in this context, a pixel is identical to a point or 1/72nd of an inch, corresponding to 72 DPI.

  So when you place the image, the w and H values reflect pixels real x the size in pixels of the image, regardless of the resolution created / used to in Photoshop.

  And that is why it must be reduced by multiplying with 0.24 and do appear in the size corresponding to 300 PPI.

  No need for percentages.

  But you can also select the image and use the object > transform > scale and apply uniform 24%, which is equivalent to multiplying by 0.24 as described.

• Do all the images the same size and position

  Is there a way to Captivate 8 to make several images of the same size and position on one screen?

  Instead of having to manually adjust the properties?

  Thank you.

  Select all, first one selected must have the right position and size. Then use right-click menu, Align, align and resize of the same size.

• All images need the same size

  Hi all

  Is it possible to correct all the images in a loop in the same size.

  i.e., width = 10mm; Height = 8mm;

  I am successful to resize the limits. But I'm not able to fix in the same size for the objects of research.

  Try the Code:

  var myDoc = app.activeDocument;
  myDoc.viewPreferences.horizontalMeasurementUnits = myDoc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.MILLIMETERS;
  
  app.findObjectPreferences = NothingEnum.nothing;
  app.changeObjectPreferences = NothingEnum.nothing;
  
  app.findChangeObjectOptions.objectType = ObjectTypes.ALL_FRAMES_TYPE;
  app.findObjectPreferences.appliedObjectStyles ="aaa";
  
   var myFind = app.activeDocument.findObject();
  //~  alert(myFind.length)
  
   for(i=0; i<myFind.length; i++)
   {
       var myBounds = myFind[i].geometricBounds;
       myBounds[3]-myBounds[1] = "10mm"
       myBounds[2] - myBounds[0] = "8mm"
  
  //~      myBounds[2] = myBounds[2] + 10;
  //~     myBounds[3] = myBounds[3] + 10
  //~      myFind[i].geometricBounds = myBounds
       }
  

  Could someone help with my request.

  Thanks in advance

  Beginner

  BEGINNER_X wrote:

  ...for(i=0; i...
       }
  
  

  If someone asks you to set the y - x = 10 will you

  increase/decrease the 'y' or

  increase/decrease the 'x' or

  two of them?

  How does InDesign?

  myBounds = myFound[i].geometricBounds;
  myBound[2] = myBounds[0] + 8;
  myBound[3] = myBounds[1] + 10;
  myFound[i].geometricBounds = myBounds;
  

  It should work inside the loop

  Jarek

• How to create a pdf file of 4 pages of images - each page must be open to the same size

  How to create a 4-page pdf (from 4 images - all the same size) which opens each page in the format full page?

  Thank you very much.

  Ginger

  PREVIOUS MSG:

  My goal is to create multi page PDF files created from the images (scans of old brochures).  I get images (scans of pages) to the same size.

  I was able to create 4 PDF files (each opens in format full page) and merge into 1 pdf file.  When I opened this final pdf, I see a column of 4 pages, picture on page 1 being larger than the other 3. When I click on the left icon, page 1, I get the full page.  When I click on the icons for pages 2-4, I get nothing.  The only way I can get the other pages in a view full page is to adjust the scale after selecting the icon on the left.  This is not what I want.

  How I created the files.

  I can create pdf pages using Photoshop or Acrobat Pro itself through:

  File > create PDF > From File and adding each image.  I then, for each, choose Properties > initial view > Fit Page > save. Can I use file > combine > merge files into a single PDF > save.

  I have to open the multi page pdf file.

  I appreciate all help.

  Thank you

  Ginger

  PREVIOUS MS

  If you use Photoshop, have you not thought about having a 4 layer Photoshop file and make sure that all images appear on separtate layers you would like them to appear in PDF format.

  You should then be able to save in PDF via Photoshop and D command to bring up the properties of the document, obtained in the initial view and select your choice of display preference.

  Hope this helps

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Alanysis and Hyperion reports has a scope of report include Hyperion Finanicial Reporting, web analytics services RA framework and the Foundation as a layer application and client level there EMP Workspace, SmartView etc.

  Thank you

  ~ KKT ~.

• Cannot download eBooks after upgrade of PC.  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download a

  Recently I upgraded my laptop to one from the same supplier so all I had to do was to upgrade a few drivers on the hard drive.  My copy of ADE is unfortunately not too cooperative.  Whenever I try to download an eBook, I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12".  Uninstall ADE (three versions), as well as cleaning the registry does not clear the error.  And I can't cancel and reauthorize my new laptop as to authorize is greyed out.  Anyone else having this problem?

  Problem solved finally.  Used regedit.

  https://helpx.Adobe.com/Digital-Editions/KB/error-e_act_not_ready.html

• ALSB 3.0 and 3.0 of the OSB and OSB 11 g are one and the same?

  Hello
  
  I'm a bit confused between these three, ALSB 3.0 and 3.0 of the OSB and OSB 11 g are all one and the same?
  
  If Yes, then I would like to improve my existing project of ALSB 2.6 to 3.0 OSB or ALSB 3.0.
  
  Questions more based on the answers above. It would really help if someone can give me a quick answer and links related to this.
  
  Thank you
  Jagadish

  OSB/ALSB 3.0 and OSB 11 g are two different versions. Even in 11g, the latest version available is 11.1.1.5. Please see-

  http://www.Oracle.com/technetwork/middleware/service-bus/Overview/index.html

  OSB 11 g travels Weblogic 11 g (10.3.x). OSB 11.1.1.5 gets deployed on top of Weblogic 10.3.5

  Kind regards
  Anuj

• How to replace a picture and save the same size as the previous?

  I want to replace a picture in a PDF, but I would want to keep the same size et location than the last. I tried it, but the new image takes another size.

  It is a PDF exported from a Model InDesign.

  
  

  
  

  If users have Acrobat so that you can configure a button that displays a

  image. When the button is clicked, the user may be prompted to select a new

  file image to display.

• pdf creation of the SAME SIZE of two pdf files

  I'm probably not follow instructions very well, and I'm not finding an explanation in the documentation so I hope someone can help me here.

  I have two pdf files. one is a cover of a magazine page, and the other is a page within the magazine where my work is mentioned. I want to combine these two PDF in a SINGLE pdf, but in a way that both the pdf is the same size. I feel like I am missing a setting somewhere for it as whenever I do this inside page is printed on the pdf document to half the size of the cover page.

  I tried to save out in png and making sure they are the same size and resolution, but it prints (except Preview) with white around the borders.

  I tried recording outside in optimized PDF and affecting the sizes 8 x 11 and 72 dpi but this then prints out Acrobat as a very pixelated in the document that are not readable.

  can someone help me with a step by step on how this can be done? It seems that I should just be able to open two random pdf files in the menu CREATE and then tell Acrobat to print to a specified size (this would be easy!), but I must be missing something.

  TIA

  Hotwheels 222,

  It might help to think that PDF is a container that can have many things such as texts, photos, graphics, vector elements, etc. all wrapped up in it.

  Normally, the content is created in another application such as InDesign, Illustrator, MS Word or many other applications. In the application you create a blank document and add or place images, type text in any font you want to place or create some elements of vector (if the application has actually vector tools)and even other multimedia such as audio and video as long as the application supports,

  Photos can all have a different resolution, vector elements have no resolution (I'll explain), the text can be in many different fonts, and they all keep their distinct characteristics within the PDF file.

  A PDF file created from an application like Photoshop will be just a resolution, because the PS is a pixel in the image editor and a PS document can have only one resolution.

  .. .the idea that two adobe products cannot communicate Acrobat to photoshop in terms of a resolution of pdf in photoshop seems very awkward... Once again, as a PDF file may have a lot of pictures with different resolutions, even if the PS could get this info (which may not) what PS resolution would decide to use? PS sheets it is up to the user to decide based on what they want their final production can be.

  You mention a document you have this "seems no inserted images" and "it appears as if there is an image"?

  The pdf of the cover are you referring?  The PDF producer is "Adobe Acrobat Image Conversion plug-in 10.0" is a tip out of 'Test Name screen' and thought it came from Photoshop.

  While possible, this document was created entirely in Photoshop, it is also likely that it was created in another application such as InDesign, exported from here in PDF and then PDF etc. was opened in Photoshop that rasterizes the content and flattened into an image file with the resolution you have chosen when opening in PS and then saved as just an image in PDF format. The graphic designer who created this probably did this because they did not want to give you a print quality PDF that you can try to extract the elements of.

  You mentioned that you thought that the doc was in Adobe Illustrator (AI) HAVE is primarily a tool for creating vector allowing also to the pixel for inclusion based raster images (with a resolution of specific pixels) to be included in a document of AI if wanted.  Strictly speaking, vector objects do not have a resolution. They are based on mathematics,

  He said essentially, put a point to such & such X, coordinated, now, put an another punch to another X, Y coordinates, it takes account of the arc or angle between the two points and said to draw a straight line, or draw a curved line, etc. Since it is only the mathematical instructions. This can be as large as you want and the relationship between the 2 points and the arc of the curve or line will dictate how the extended line or curve will be redrawn enlarged.

  Vectors are 'independent of the resolution' you can draw a vector logo to 1 x 1 inches and enlarge it to 50 x 50 inches or even as important as a home and it will always print crisp and clean. Notice, that this applies only to vector content in your document; pixel content is blocked in the resolution, it was created in the.

  To inspect the elements in a PDF document using the object Inspector in Acrobat Pro. Since a PDF file can contain several different objects, you have to click exactly on each object to get information about the selected object. So if you had 10 photos in your PDF you must select each in turn and he would give you the size in pixels, resolution, color space and profile, etc if you have clicked on the text, it will identify the police. It is well named, an Inspector of the object rather than a Document Inspector. Try it yourself with the different PDF files that you may encounter. If for example, it gives you the exact same info (resolution, pixel dimensions etc.) bit matter when you click, then you're probably dealing with a simple image. If you get the dimension in different pixels, resolutions when you click in different areas, you're dealing with a PDF file that had separated the distinct elements.

  I don't see why I shouldn't be able to get a document that is located at 17.7 x 22.9 to 72 dpi up to one that is 8 x 11 at 300 ppi.

  In Photoshop, go to the Image, the Image Size menu. This will show the dimensions in pixels (width & height) at the top. If you don't interpolate (resample) Photoshop can only put the same number of pixels in different size documents. When you press it same number of pixels in a smaller resolution doc increases. When you place the same number of pixels in a larger doc and the resolution fails.

  Don't forget, that the resolution is PPI (Pixels Per Inch). If you do the math it starts to make sense.

  Below notes that each dialog box features the same EXACT pixel dimensions.

  In the first box, it shows the 1275 x 1650 pixels in a document of 17.708 22.917 x inches. This gives a resolution of 72 DPI.

  In the second box, I changed the size of the document to 8.5 x 11 inches and pixels of 1275 x 1650 even now increase the resolution to 150 DPI.

  In the third box, I changed the resolution to 300 DPI and the pixels of 1275 x 1650 even now decrease the size of the document to 4.25 x 5.5 inches.

      

  If you check the resampling, Photoshop will interpolate (resample) image to throw the pixels, or adding pixels, but there is no magic involved and the results are never as good as we could hope.

  Like Goldilocks and the 3 bears, some things are better when they are 'fair '.