not the same size of the image when I import it

Similar Questions

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• Photoshop problem (does not display is not the image)

  HY,

  I just installed photoshop on my new laptop computer and it shows all the images when I open them.

  as you can see in the picture I posted I have an image open (its also so in a layer)

  I can use photoshop but I don't see anyting Exchange in the normal zone (East Exchange in the area of the channel).

  I tried with different photos

  means

  

  You can enable/disable OpenGL drawing in Photoshop preferences, on the performance tab.

  And you must go to the NVidia website and update your driver.

• What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  What is happening in the original file of the photo when I import it in Photos and I have the "Delete after import" box checked?

  When organizing photos for Photos for Mac app, I find that the Photos makes "copies" of files within the library of Photos and must reference a file if your settings are such that you do not copy the original files in the Photos app.

  Trying to manage the disk space for the Macbook Pro.

  The delete after import is available only when you import a device - a camera, card, an iPhone, but not when you import files from a folder on the system drive.

  You can delete the local image files of your system drive yourself, once you have imported the Photos and they were copied in the photo library.

  I would never use the option "delete after Import. The files will be deleted until you can check if the files have been imported correctly. If you find out later, that some of the imported files are corupted and illegible, it will be repeated o toolate import, because the files have been deleted from the device. Or worse, if pictures should plant a reason any during the import, all the pictures will be lost, if you have enabled "delete after import.

• Can I import words from the file name as keywords in the metadata when you import pictures?

  Hello

  My apologies if this question has already been asked. I can't find the answer: will / Lightroom can import words filename for my photos as keywords in the metadata when you import the photos from my hard drive? And if so, how can I do this?

  I'm new to Lightroom from iPhoto. After reading several articles on the transfer of photos from iPhoto, I exported some 7000 photos in an electronic file on my hard drive. I'm following the advice, sort and rename the photo files on my hard drive to be able to import them into Lightroom in an orderly fashion. It is not too difficult because iPhoto already for most changed the filenames for event names as ordered in iPhoto. I also prefer to do it manually rather than using any iPhoto / Aperture plugin because my iPhoto organization was far from perfect and I have already started to significantly improve by changing the file names.

  I'm renaming the files of images with additional information to improve the organisation even more with what would anyway keywords "DATE/NAME/NAME OF PERSON (S) IN THE EVENT PHOTO" so it would be good to not have enter these keywords in the metadata after import for each photo. It's automatic and if not is there a way to do this? All the other tips are welcome!

  Thank you

  Hi adiscerningeye,

  You can create metadata Preset and then apply this preset on import for images.

  Link partners: -.

  Adobe Photoshop Lightroom Help | Shares of advanced metadata

  Adobe Photoshop Lightroom 4 * create and apply metadata presets

  Once you create a metadata preset, you must select it during import so it will be applied on all images when importing.

  

  You can also type a few words under key words, so it will work like keywords for this specific to import Images.

  Let us know if it helps.

  ~ Mohit

• Images imported into my Stadium go up as white and make each image before the image of thugs imported as red squares that fill the perimeters of the image which then renders the publication and test scene has useless Flash, what can I do

  I worked on the animation of a scene in flash for a few weeks and recently I met a problem with the import of my images to the stage where images I have import increase, however, the keyframe I tried to import the image to watch that it is occupied by an image and each image before the image key that just imported a picture that doesn't show shows up as a red square that fills the perimeters original of the image , there is no solution to this problem all where on the forum and the personal adobe technical support does not help me find a solution to this problem, what can I do to get Flash working normally again and fix this?

  After the first time that I publish a preview after I start using the flash, flash makes the publication and the test scene features as useless and claims he has not found an HTML template, or if the images if I import all the images on the stage who empties and display each image before the image as a red square and then try to publish a flash preview renders also the publication and the scene features test as useless and claims he has found none of HTML template. What can I do to fix this? There is no solution on the web anywhere to this problem either.

  I discovered the problem, I just need to get a Z820 with a Nvidia Quadro K6000 graphics card and a new Flash Professional subscription, I'm lucky, I did what I did. Thank you!

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• How do I keep the size of an Image when it is placed on a new canvas?

  I've worked with a lot of different Photoshops, but recently, I was in another computer so I just Photoshop Elements. I was excited about its use and opens a blank canvas to start working with. When I pasted into another image, he immediately reduced the image to fit at the height of the canvas, which is not what I wanted. I want the image to maintain full-size when pasted in the new canvas.

  I've scoured Google for an answer to this, but the answers do not work, I can not find them or my mind is not enough common sense to understand what they are saying about tech.

  Any help would be greatly appreciated. Thank you!

  Do you really mean that you pasted, or a drag you to the photo tray? If it is a bug known - see here for workarounds: http://forums.adobe.com/thread/1393774?tstart=0.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• When I go to Amazon (music section), cd titles are there but not the image of cd cover. If I use explore photos are here. Why?

  When you use Firefox as your browser, if I go to amazon.com and search for a particular cd, the title and all the other info on the cd came but there is no cover image. This problem has just a few days ago everything was going well for in recent years - but now there is no picture on almost anything. If I use Explorer as browser and do the same research, photos are all there, as it should. What happens here?

  See http://kb.mozillazine.org/Images_or_animations_do_not_load

  It is possible that you clicked on 'Block Images' from the context menu in an attempt to save an image.

  Check the image exceptions: Tools > Options > content: Load Images: Exceptions
  
  See web content, pop-ups, fonts and language settings

  • A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • The Media of the "Page Info" window tab.
  • Select the first image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• When I send a picture to Lightroom Develop module, image Navigator shows very well, but not not the image complete.  All I get is a blue background, where the image should be. What is happening with this?  I just installed Lightroom and Photoshop CC on a

  I used Photoshop and Lightroom for years and upgraded to CC about 6 months ago.  I just got a new computer and downloaded Lightroom and Photoshop CC on the new machine.  In Lightroom, when I send a picture to the develop module, all I get is a blue screen, where the image should be.  The navigation signs and develop panels show very well, but the image does not appear on the main screen.  It appears in the browser.  What's up with that?

  Disable the CPU graph use in the performance of the LR preferences tab. Blue box will be gone, Image will show.

• Loss of the size of the image when exporting .tif

  I have a series of .tif images that have original dimensions of ~ 4700 x 4700. However, when I open them in illustrator, they invariably under ~ 1750 x 1750. TIF, even if no changes have been made. How to preserve the size of the image?

  Lol Illustrator will always respect the resolution setting. You will need to put the image in Illustrator, if you want to keep the resolution.

• Change the size of the image when I click it.

  I want to have the effect, I hover over or click on a picture and it gets bigger. But without having to open a new page. It must just zoom up a little bit. Is this possible? Thank you

  Hey Unterwaldt.

  That proposed Parikshit was to increase the size of the rectangle of the size of working capital that you have indicated in the second screenshot and in normal state uses the smaller image, but that the approach will trigger the effect as soon as you enter the rectangle and roll over not exactly part of the image.

  A better way to do this would use the Composition Widget - ToolTips. You can place the trigger on top of your image and give him a void fill and then place the target where you want with the big picture, be triggered by the substitution effect and hide as soon as the mouse rollsout.

  I hope this helps.

  - Abhishek Maurya

• I do not see the image when I layer 2 images

  I try to layer 2 in PS JPEG files and tried to open the 2 files and copy / paste it and also tried to drag and drop.  A new layer is created, but I do not see the image so that I can resize.  Went through all the tutorials and answers to similar questions but no luck.  Tired - I'm sure this must be a very simple thing to do.  Thank you.

  I figured well tones to be involved, but with a jpg that wouldn't be a problem anyway.

  What did you do for troubleshooting so far?

  Restoration of preferences after checking all the presets custom like stocks, models, brushes etc. have been saved can be a good starting point:

  https://helpx.Adobe.com/Photoshop/KB/basic-trouble-shooting-steps.html