Why save a Mac

Similar Questions

• Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Sounds like a conflict. What else is in course, including plugins ID third-party programs or utilities that run in the background on the Mac?

  Also, have you tested in a new user?

• Why does my Mac Pro backup files as I remove them? It fills up my storage.

  Why is my Mac book pro backup of the files I was trying to delete them? It fills up my storage (according to 'about this Mac' I have 102 GB backups on my Mac HD) and I can't find in finder to their redelete.

  Disable Time Machine unless you have a Time Machine backup disk connected. You are looking at snapshots created by Time Machine when no backup disk is connected: Local Time machine snapshots.

• Help! Why 'Save' did not work in Word 2008? (Sudden compatibility problem?)

  This may be a matter of Microsoft, but I couldn't find an answer on Microsoft, and I see that sometimes Word questions get addressed here - I'm really desperate, so thanks for any help out there!  For my actual questions, scroll down.

  SITUATION:

  Yesterday I plugged my Macbook (13 "early 2006) to a"certified refurbished"card I bought it in case I ever needed replacement.  This morning, my speakers Logitech from emitting a buzzing, but it disappeared when I disconnected the.  Then after that I had worked for about 20 minutes, Word for Mac 2008 started to work very slowly.  Fortunately (I thought), I have always set Word to register automatically once per minute and had saved the document several times manually anyway.

  Don't know what was going on, I saved the doc once and tried to quit Word normally, but everything was so slow that I knew I was in trouble.  I couldn't get to "Force quit" in the Finder or get the slider to make a restart (the cursor moved but Finder did not), so finally I forced a stoppage.

  When the computer has restarted, I was hoping that at least if the document had not been recorded when I pressed on congratulate + S, I could get it back to automatic recovery.  However, when I open the document again, not only had not he been saved, but nothing of all the work I had done since starting to work 20 minutes earlier had been saved or (although I definitely checked him at least 4 times, including just before trying to quit smoking).  In addition, the 2008 Auto Recovery folder is now empty.  Other Office programs that I use seem to work normally.

  I have copies of what I started with (I save to Dropbox on a stick every time I stopped to work and every night with SuperDuper/passport), so it was not a disaster, except that I really want to recover the work I've done.  I went into the preferences of Word and saw that "Autosave" was always "every minute" but "Always make a backup copy of" has been disabled, so I checked it - but of course will not recover my lost files.  I then went to the typed Word document something again, click Save (File menu this time), you leave the file and reopened; the change I had made had been recorded. If that really works, but I fear even saved manual can stop working!

  QUESTIONS:

  1. is it possible to locate and recover at least one of the previous versions I saved?  (Hopefully there is a simple explanation; "I'm a kind of a technodunce!)

  2. where did you all documents Word 2008 AutoRecovery go who were supposed to be in the folder Microsoft Data?

  3. can you Word 2008 suddenly became incompatible with OS 10.6.8? Or could the new adapter did BONES 10.6.8 (Word, Finder, etc.) crash AND destroyed existing AutoRecover documents?  (I had not looked into the record of automatic recovery for a while, but I'm sure there are a few in there!)

  4. where are all these "Works Word files" I always saw? Don't know what they were for, but I can't now.

  5. Why does Word not only disappear all the existing documents of ASR, but also stop save the custom keyboard + S?

  Thank you very much for any suggestions on these questions (1 and 2, in particular!).

  If the problems started after you connected to the adapter, try this disconnection and test.

  Data - best recovery

  Recovery of data-disc drill

  Data recovery - Data Rescue

  File recovery-data recovery

  -Stellar Phoenix data recovery

  Data recovery - uFlysoft

  Data recovery - recovery of deleted files

  Data recovery - recovery of deleted files (2)

• Why does Firefox Mac returns 'Server not found' for a website but Safari on Mac same load site without any problems?

  The financial company Web site www.gmo.com will not appear in Firefox 32.0.02. Server not found is the only result. Safari loads Web site without any problem and Firefox for Windows computer in the House support the site without problem. All the other sites I have access, including banks, Amazon, etc. loads normally.

  What/why the Mac of Firefox version would not be able to to connect/load this site?

  The company of people told me that no one else has reported this problem and other people in my company can access the site. And they cannot reproduce the problem.

  My ISP provider could not see anything from their point of view. And access all computers to the modem/router in the House everything without any problems.

  Anyone have any ideas on what would cause this or how to go about troubleshooting?

  Thank you for your time.

  Looks like it's something on the computer. There are cookies that must be removed individually from the Firefox profile.

  To do this, go to the Firefox Menu, tap Preferences, then tap privacy and then delete cookies or cookies see the. You can search the sites that gives you problems and remove them. Restart Firefox.

  It could also be that you add a DNS server for your connection. 8.8.8.8 is google, but I don't know if this would affect given that the server is not found, not that there is no link, that's why it does not sound like a connection problem, but a cache problem. Use the Profile Manager to create and delete profiles Firefox

• OfficeJet Pro 6830: Officejet pro 6830 scan won't save in mac Sierra

  I open HP Scan of Applications on my iMac, running Mac Sierra.  Scanning documents OK then I have the ability to send to the printer or folder.  When I try to send a file, the 'Save' button is grayed out and I can't save the analysis.  I tried to save in different formats and different folders, but without success.  Any ideas?  I can save a scan if I directly on the printer, but in this case I don't get a choice of file to send it to.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Failed to save the Mac Pro Quad Core 10.8.5

  I recently installed Mountain Lion on a newly formatted on my Mac Pro Quad Core Intel Xeon desktop drive, installed all updates to 10.8.5 and now when I try to record on the 1 TB drive, says the disk is locked. When I try to copy files to the boot disk, I authenticate first. The other 2 HD copy and record properly. What is happening that I can't save or copy on the new drive? My applications act as they are also used for the first time. I did a "Get Info" to verify permissions and changed to read & write for all accounts.

  Thanks for your suggestions. It's frustrating!

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• Why is the MAC address Clone?

  When I disabled it Clone MAC address I lost access to the internet.

  Does anyone know why MAC address Clone is necessary and what it does?

  Clone MAC address changes the MAC address of the router on the internet port.

  You can use the function of the cloning MAC address to clone the MAC address of a computer if you used before your computer directly to the modem.

  Some ISPS (especially cable ISPS) only the customers to have an active internet connection at any time. To do this, check the MAC address, that is, they remember the MAC address that accessible line via the modem and lock the connection to this MAC address.

  If you test your internet connection directly with your PC first and then connect the router the router can not get an internet connection because the row is locked to the PC's MAC address. Now if clone you the address MAC from the PC on the router the router "pretended" to be PC and the ISP will accept traffic again.

  Usually, simply reset or turn on the modem to reset the lock again. Sometimes, you have to turn off the modem for a couple of hours (for example, through the night) after a few hours of inactivity the ISP removes the lock again. Sometimes call the ISP to remove the lock, but it's not very often.

  So basically, generally useless clone MAC address at all because you could accomplish the same thing by resetting the modem or it turned off for a few minutes. If you connect the router to the modem, ISP learns the MAC address of the router and it gets working internet connection. (Of course remember, that once a computer directly connected to the modem would not get active internet connection unless you change the MAC address of the computer to the MAC address of the router).

  But the function is useful if you do not want to. You simply set the MAC address of the connected device before, and you get a working internet connection.

• Why 'save for web' or 'Export as... ". ' change the hexadecimal color to my image?

  I save a series of images for use on the Web site using the background color #c54a90. This is achieved my having my background layer filled with color and other images then placing on the top (see screengrab below). However, when I export the image for the web or export in JPG the hexadecimal color replaces #c64a90. Does anyone know why this is? I have my RGB working space set to sRGB and the color profile is also sRGB. When I save it for the web, I tried embedding the profile and do not incorporate the profile and I get the same result. I also tried with and without conversion to sRGB in the Save Panel for web and has also no effect. Can anyone help? He drives me crazy!

  
  

  Here is an example jpg resulting.
  

  

  
  

  Here is the version stratified showing the original hex color:

  
  

  
  

  Compression JPEG WILL change your image color values, because it is a lossy compression format.

  Visually, the colors will be close, but the exact values are supposed to change.

• Why 'save' is dimmed?

  I just quark Express and learned to 'save' every few minutes when it crashed all the time.

  InDesign: Why is 'Save' grayed. Only "save under" is an option? It works fine, but makes me nervous?

  A prefrence somewher I could change?

  Thank you!

  In fact, that shouldn't matter. The only time where to save should be grayed out is when there has been no change.

• Why D11.5 Mac App Standard projector requires Shockwave Player 11?

  I created a review study helps for my students with D11.5 and changed into a Windows executable and an application for Mac users.  I don't select no compression in the settings of the projector and selected drive type: Standard on the tab of the projector. On some computers, studying the Mac App is asking them to Download Shockwave Player 11.  First of all, I created the Mac projector without compression or Shockwave and therefore why he asks the student to download the player.  Second, even when they download and install the new Shockwave Player, which is now up to version 12, he complains that they need to download the reader and the app will not play.   What should I do to solve this problem, so my students with the Mac can use my review help?   Help, please!

  In case someone else has this problem, which seems inevitable since there is obviously a bug in the creation of the Mac projector option in Windows.

  I was actually able to talk to someone from Adobe on the phone and they suggested to uninstall the Adobe Shockwave Player 12 new and go in the other versions, and install the old Shockwave Player 11.  If you have others using your software and the Mac app starts asking for Shockwave Player 11, here are the instructions that I made for my students solve the problem.  I hope that someone will find them helpful:

  1. click on the Applications folder on the right side of the menu icons at the bottom of your screen.

  2. find the icon of Adobe Shockwave Player in the opened window.

  3. double-click on the icon of Adobe Shockwave Player.  They said that a menu should appear, including the uninstall.

  4. Select uninstall to uninstall Shockwave Player 12 you have downloaded. Now after completing the uninstall:

  5. go to http://get.adobe.com/shockwave/otherversions/

  6. where it says install a different version of Adobe Shockwave Player

  Select Macintosh OSX for step 1,

  then select Shockwave 11.6.8.638 full for step 2

  7. now click the agreement and now the button install and install

  That should fix the problem, but why the .app requires Shockwave Player 11 in the first place since I created the projector without compression of Shockwave.  Of course there is a bug in the application of projector to create for the Mac in the version of Director 11.5 Winodws now as Director 12 was released, which Adobe need to patch.

• Why save for Web and devices is grayed out?

  I have Photoshop CS5 on Mac OS X Lion mountain. PS works fine, until today. On some images, I work with, file > save for Web and devices is grayed out. In addition, to save money, the options are extremely limited. It is obvious that I inadvertently clicked on something that caused this, but I just can't understand that.

  I took a screenshot of Photoshop with a test image (test.psd), whose resolution is 72px, RGB, 32 bit, appearance save for Web and devices greyed out. And a screenshot of the Save as dialog box.

  Is the first screenshot to http://eastbrookwind.com/screen-shot.jpg

  Is the second screenshot to http://eastbrookwind.com/save_as.jpg

  I am confused and appreciate much help!

  Right. You work in 32 bits per channel. Change your bit depth.

• Code Inspector preferences does not save CS6 Mac

  I use CS6 for some time now. Works great with one exception. Whenever I stopped DW and reopen it. I have to reset the settings of my Code inspector window. I would like to have Word Wrap, line numbers, and enabled syntax coloring. For some reason any DW CS6 will not save my settings. Any idea why this might be? Obviously, it is not something huge, just annoying.

  I had this problem as well since the installation of the CS6.  I think I have found a way to resolve the issue (at least for my computer it worked).

  Once you have your screen set to how you want to that, including the preferences of your Code Inspector.  Select window > presentation of the workspace > new workspace.  Create a name for your page layout and save it.  Once you restart your computer and then restart DW, it should have all your layouts of the screen and your preferences of registered code Inspector.  I hope this helps.

• Why auto unlock Mac with Apple Watch stop working?

  When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

  Your Apple Watch is unlocked?

• How can I save my Mac without my external hard drive?

  I travel constantly right now and do not live in a place I can call home, I have a suitcase and no airport Apple's Time Capsule.

  However I wish I could back up my Macbook beyond the usual Notes and calendar synchronization iCloud, which is done automatically.

  There are a lot of settings that I would not adapt to my own preferences once again, for example.

  What services are there for it?

  I'm looking for something that would provide a restoration, similar to what is offered on an iPhone via iCloud, an identical backup of my Macbook.

  Please help me on this, there is surely an option online for this already in this base world will we live?

  Thank you guys

  Dan

  You really need an external drive for backups, unless you have a big enough SSD on the computer. If you do then simply set up Time Machine and turn it on. It will create snapshots stored invisibly on the SSD. Of course, they take a storage space. This is really not a good idea.

  You could buy instead a cloud-based backup service. We could use any number of them around you. For example, DropBox and SugarSync ChronoSync are good for the Mac. Of course, cloud storage is quite slow, and the first backup will be very slow finish due to its size. Subsequently, they make only incremental updates.

  You can buy an external SSD that can connect either using a USB - C or USB 3.0 port, as well as an accessory for your MacBook to activate the connection USB 3.0 and USB - C as the C - USB Hub, shuttle HooToo 3.1