"Why the 2 screws are not same speed?

Similar Questions

• Why the acquired data are not from min to max (DAQmxCreateAIVoltageChan, PXI-4472) values

  Hello

  I'm developing a program for the PXI-4472 acquisition on opensuse 11.4 device (linux 2.6.34).

  I try to acquire analog data and to read in a wav file.

  Configure the task of acquisition with the following functions:

  DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","OnboardClock",DAQmx_Val_Cfg_Default,-10.0f,10.0f,DAQmx_Val_Volts,NULL);
  DAQmxCfgSampClkTiming(taskHandle,"",48000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,48000);

  DAQmxDisableStartTrig (taskHandle);

  I don't understand why the data stored in the wav file are not-10V,-10V but-5V, 5V... (the value of the gain is 0dB). (Perhaps a scale of 0.5?...)

  Thanks for your help,

  Amandine

  You're right, in my example, I considered as unsigned data.

  Concerning

• Why the proxy settings are not respected

  I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

  If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

  Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

  When the proxy server IS up, Google searches do not appear to use it.

  Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

  Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

  My configuration problem. I realized that any site that uses https worked, while others are not.

  Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

• Why the imported bookmarks are not displayed?

  I installed Firefox and wanted to import the settings from my old laptop. To do this, I installed MozBackup on my old Win2k laptop, used to back up my full profile on my flash drive, then installs the flash drive for the new PC Toshiba laptop with Win7, installed on the Toshiba and used MozBackup restoring a profile feature to import the profile saved from the flash drive. This, even though it was on a Win7 system, worked like a champ. However... Later, I tried to import the same profile of Firefox on my WinXP turn, but I didn't see any results after import: empty, empty bookmarks bar bookmarks, even the home page would not display when Firefox is opened.

     When I realized that everything was set OK and everything else was working, but nothing in Firefox (v32.0) was working as it should, I used Revo Uninstaller to completely uninstall v32, then I installed version 23. That Firefox version happily accepted the profile import, the Bookmarks & Bookmarks toolbar displayed the imported Bookmarks, and the home page displayed when Firefox opened.
  

  Does anyone have a better fixed or solution?

  Given that Firefox 12 was the last version of Firefox that was compatible with W2K, you were restoring via MozBackup profile to a very old version in Firefox 32. Chance to shear it worked with Firefox 23.

  There have been many changes in the files that are located in the Firefox profile between ~ 19 of Firefox and Firefox 32 - and there is more coming changes to the next three versions that are already in the "pipeline" and probably beyond those, too.

• Help - why the songs that are not on my iPhone appearing in my list of app music albums/songs?

  I have over 500 GB of music on my Mac, so I create a playlist for the songs I want to sync my iPhone. Yet when I look at my phone, there are many songs that are not in sync would be playlist. They cannot be read unless the phone is connected to my wifi at home, but I don't want them cluttering up my phone and makes it almost impossible to find the tracks I want to listen to.

  I hate the new music app. For the first time since I converted to Apple 10 years ago, I wonder if I can be forced away because it's so horrible. Why ruin a great product with terrible software? Anyway, if anyone can help me to fix this serious bug, I would be very grateful.

  If you go to the library of the screen and press the red text just below the icons of the album/playlist (where you select whether you want the screen to show the view of the artist/Album/songs downstairs there is a toggle to only show that downloaded music.) If you enable this, then only the songs that are actually ON your iPhone will be in BLACK characters. The rest of your music library to iCloud either won't display at all or be grey. Now - if you have a few streaming, you can see more songs, because the songs that are heard are cached in the memory of the iPhone box and supposedly deleted automatically when it fills up (but not user accessible unless you use some third-party programs).

  What you can do - so they need WiFi or data cell-, it's make a playlist in iTunes that you want on your iPhone. Then (assuming that Apple music and iCloud music library are running on both), you can go to the playlist and press the small cloud/down arrow icon and download these tracks on your iPhone. Then, you can play these songs without access to wifi or cell phone.

• Why this two queries are not same

  Hi all
  
  Can you please explain this fundamental thing. Why this two queries are different. (10.2.0.3 Solaris Sparc 64)
  

  create table x1(a1 varchar2(10),a2 number, a3 varchar2(10));
  create table x2(b1 varchar2(10),b2 number, b3 varchar2(10));
  insert into x1 values('X101',1,'XX1');
  insert into x1 values('X101',1,'XX1');
  insert into x1 values('X102',1,'XX2');
  insert into x1 values('X103',2,'XX3');
  insert into x1 values('X104',2,'XX4');
  insert into x1 values('X105',3,'XX5');
  commit;
  
  insert into x2 values('X101',1,'X21');
  insert into x2 values('X101',1,'X21');
  insert into x2 values('X102',1,'X22');
  insert into x2 values('X103',2,'X23');
  insert into x2 values('X104',2,'X24');
  commit;
  
  WITH xx AS (select b1,b2 from x2 where b1 IS NULL)
   select x1.* from x1 ,  xx
    where x1.a1 = xx.b1(+) and  x1.a2 = xx.b2(+) ;
   
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
  X104                2 XX4
  X102                1 XX2
  X103                2 XX3
  X101                1 XX1
  X101                1 XX1
   
  6 rows selected
   
  select x1.* from x1, x2 where x1.a1 = x2.b1(+)
      and x1.a2 = x2.b2(+)  and x2.b1 IS NULL;
   
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
   
  select b1,b2 from x2 where b1 IS NULL;
   
  B1                 B2
  ---------- ----------
   

  Thank you!
  NA not (sentence of) think of this.
  + (it's one of those things that I really need of don't forget do not forget ;)) +)

  hoek&XE> select x1.*
    2  from   x1
    3  where not exists ( select null
    4                     from   x2
    5                     where  x1.a1 = x2.b1
    6                     and    x1.a2 = x2.b2
    7                    );
  
  A1                 A2 A3
  ---------- ---------- ----------
  X105                3 XX5
  
  1 rij is geselecteerd.
  
  Uitvoeringspan
  ----------------------------------------------------------
  Plan hash value: 816925353
  
  ---------------------------------------------------------------------------
  | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |      |     5 |   100 |     5  (20)| 00:00:01 |
  |*  1 |  HASH JOIN ANTI    |      |     5 |   100 |     5  (20)| 00:00:01 |
  |   2 |   TABLE ACCESS FULL| X1   |     6 |    72 |     2   (0)| 00:00:01 |
  |   3 |   TABLE ACCESS FULL| X2   |     5 |    40 |     2   (0)| 00:00:01 |
  ---------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - access("X1"."A1"="X2"."B1" AND "X1"."A2"="X2"."B2")
  
  Statistics
  ----------------------------------------------------------
            1  recursive calls
            0  db block gets
            6  consistent gets
            0  physical reads
            0  redo size
          518  bytes sent via SQL*Net to client
          384  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            0  sorts (memory)
            0  sorts (disk)
            1  rows processed
  

• Why the text fields are not shown in the exact position where I place, being in a position different from the design view and preview?

  Enclosed is the difference in preview mode and Design Mode.

  Please note that I noticed the same phenomenon occurs on the "IRINA" template that I downloaded for use in training.

  

  Well, what you are is the correct behavior. The image is scaling due to the width of the browser. This is normal because the text does not meet the resizing (yet). You should be able to fix this in the next version of Muse. Or you can join the public beta version now and try it.

• Can someone from Adobe please explain why the CS6 measures are not accurate... PLEASE?

  I'm tired of wasting my time looking for reasons why I touch in the measures are constantly changing to an arbitrary number decided by the Illustrator. I am currently working on a box of 100 x 100 mm with a matching grid and yet for some reason, my measurements get changed to 100,238 or 99,834 mm or similar... I just lost another 10 minutes trying to figure how someone ask this question... I'm the only one experiencing this... NO! Everything meets Adobe, please?

  Clear the snap to grid of pixels on the transformation Panel.

  Aligned to the pixel grid has been added to ensure the shots fall directly on exact pixels and therefore produce better, crisper, work for the web. If you do not work on web projects or projects designed for the screen, you must deselect snap to grid of pixels. If you are working on projects of destination screen, you can find them in line with the pixel grid is indeed a very useful feature and learn so that he can move things.

• Why the Mac drives are not partitioned?

  I've owned Macs since the 80s, 90s, 2000s and 10s ' and not is that I now realize, is not partitioned hard drive inside a Mac (currently on an old Macbook Pro).

  I can't find an answer to this question anywhere, probably because each search result estimated that I wonder about external drives.

  My MBP 2007 hard drive is about to fail (so says utility disk), and I am saved, cloned and prepared for this possibility better I can be. I want to buy a new drive hard internal and wonder if I should partition when I get it.

  I always share my external drives.

  Because most people don't partition their drive, and those who can execute the procedure themselves. It is actually necessary if you want to use several operating systems on the same drive; Whether or not you should in other cases depends on what you use your computer for.

  (144608)

• Why the text effects are not up-to-date in preview mode? CC2015

  When you use simple text like the glow effects, the effect is not updated when the preview mode is checked.

  This makes the feature extremely tedious to use.

  The question has arisen in the past without a solution...  Text effects do not update on cc 2015

  Please advise as soon as possible,

  Thank you very much

  John

  Exactly what version of InDesign are you using? The current version is 2015.3 (11.3). What operating system? Have you tried to restore your InDesign preferences?

  Garbage, replace, reset or restore the application's preferences

• Why the Adobe servers are not accessible?

  Hello

  I'm trying to upgrade from Lightroom 6 now since yesterday and it won't work.

  The application manager detects the update but tells me it can not connect to servers, and that I should try in a few minutes or check my firewall.

  The firewall is not the issue, I checked and it also disabled. Also; the app handler was able to connect in order to install this new pdf reader (DC or other), but he will not for Lightroom. What is the problem here?

  See you soon

  OK;

  He worked at some time during the weekend.

  Updated to 6.2.

  The 6.2.1 I did it manually, as it seemed not at all.

  However; now it's working.

  THX

• Why the my files are not available when checked?

  I have a relatively new Win 7 box, TC 4 running. If the armature 11, I checked a book (using CMS/SharePoint) and everything out ok. But when I go to edit files, they have question marks, and if I try to open them, the message is "cover.fm doesn't exist." for example.

  In addition, a long file directory shows instead of just the file name.

  Other users with similar configurations do not experience this problem.

  I can work with other books very well, but not this one (which is the MAIN one I use FM for!).

  Help!

  I resolved myself. Seems something has happened to the book - it lost connection with the individual files. Then I opened the book, deleted the unknown files and readded them. Problem solved!

  Always have the long super file directory name list for the book, but I can live with that.

• Why the help files are not dated?

  It would be useful that versions pdf files help on board the publication date of the cover page.  As it is, not sure if the version offered is updated from the one you have already downloaded.

  Still no contents and index, either.

  Pagination is also for paper size, much the most used commonly A4.  This translates into a plethora of widows and orphans.

  Hello

  You may have noticed that all the PDF of CS6 files now include:

  • Year and month published
  • Table of contents
  • Page numbers

  Thanks for your comments.

  Kind regards

  Sujatha

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• BACKUP QUESTION: Why is it when I backup the Lightroom Catalog (Edit |) Settings of catalog...) only the *.lrcat file included in the ZIP file... While the *., lrdata file, the preview files, ARE NOT INCLUDED?  When I restore the file *.lrcat from a backu

  BACKUP QUESTION: why is it that when I backup the Lightroom Catalog (Edit |) Settings of catalog...) only the *.lrcat file included in the ZIP file... While the *., lrdata file, the preview files, ARE NOT INCLUDED?  When I restore the *.lrcat file from a backup, WHERE ARE THE PREVIEW FILES that should be included in the ZIP to the top.  If *.lrdata (Preview file) are so important, why are not included in the zip?  [email protected]

  CraigLevine wrote:

  OK, so that's my scenario:

  • QUESTION: WHEN I USE THE [Sub-master] .lrcat, on the new computer, don't need to inculde also files .lrdata [Sub-master] on this external drive?
  • If .lrdata [Sub-master] is regenerated automatically, where he gets all the work (from the preview files) that I did, when I was working, using the .lrdata [Sub-master] when he was on the local disk.

  Thanks again for staying with me on this.  I don't know that your answer will solve my confusion. -Craig

  [email protected]

  Questions 1)

  Not because the LRDATA file is fair previews, what LR displays on your screen for a faster loading of the image and will be recreated. The previews only stored in the folder LRDATA is the basic overview created at time of importation for the display of thumbnails and previews of 1:1 for images that you have actually looked in the Loupe View or I guess that appears in the develop module.

  He get all the data to create the image themselves file extracts.

  If you have several files on your system that have pictures in them and you select one of them that you have not looked at in a while, you will notice LR creation of previews for these images, there will be 3 white dots in the upper right corner of the thumbnail. It's LR creation of previews for the thumbnail view. If you scroll quickly in the grid view, you'll notice a few thumbnails of images are gray, until you stop scrolling, then the upper left tile will come in clear view and the white dots will appear on the other images. It's LR creating previews for those of other images. Once LR created the preview of thumbnails that are on your screen, white spot will disappear. If you scroll down again, you will see more white dots

  If you switch to another folder that LR begins again create preview images in this folder. The total number of previews created and stored based on caching of the preview you have in the catalog settings dialog in the management of the files tab.

  If not, you need not the LR Previews.lrdata folder. Whenever LR is not very good this folder with a catalog he recreates it to store previews in.