Why the clipping masks are made for a Place/Embed?

Similar Questions

• Why the download options are more classified as flv, WMP, MP3 etc?

  Why the download options are more classified as flv, WMP, MP3 etc?
  All gets them one in the download dropdown is:
  (480 p), (240 p) or (360) for example and the name of the video course.
  The way it is now, I can't identify the type of video I download as I could before.
  Thank you!

  
  

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Why UAC (and what) are required for Protected Mode work

  Why UAC (and what) are required for Protected Mode work?

  Hi Leonard Santiago,

  User Account Control (UAC) is a feature in Windows that can help prevent your computer from unauthorized changes.

  You can check out the following link and check if it helps:

  What is user account control?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-user-account-control

  What does Internet Explorer protected mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-Internet-Explorer-protected-mode-do

  Hope this information is useful.

• Why the temporary files are created?

  Original title: temporary files

  Hi, I searched the Web for a long time to know "why the temporary files are created?"
  what I understand so far is there are temporary files created by MS WINDOWS, and others created by other applications like MS OFFICE APPS? RIGHT?

  - and understand that they are created for purposes of backup in the case of MS OFFICE applications,- and I do not know how? they are created when the App crash or every few minutes or what?

  - and I do not understand why "windows Temp files are created?"

  Show me examples please.

  Thank you

  Hello

  There are many reasons why temporary files may need to be created.

  Windows temporary files
  https://support.Microsoft.com/en-us/KB/92635/

  Wiki - temporary file
  http://en.Wikipedia.org/wiki/Temporary_file

  Wiki - temporary Internet files
  http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can someone please explain to me why the Metro of Windows 8 for the WSJ application contains all THE STORIES?

  Can someone please explain to me why the Metro of Windows 8 for the WSJ application contains all THE STORIES?   I have the WSJ app on my Kindle Fire and he has indeed all the stories that are included in hard print.   And why the hell not the app allows for offline reading?

  Also, why hell isn't there a WSJ application for windows phone 8?   I know there is a WSJ direct application that shows videos, but I want a real WSJ app that shows all items.

  Original title: Wall Street Journal APP

  You would be better served if you asked these questions WSJ that they control if an application exists and is happy.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Help to recreate the effect of shadow cast by the clipping mask

  Is there a few months, I created the image attached. Today, for the life of me I can not create a similar effect, where the shadow text source the clipping mask. Whenever I try to follow the same steps and the layer styles, that I get a normal black shadow not a shade that comes from the clipping mask as in my example. Help please I'm driving myself crazy!

  
  

  If you put the layer containing the shadow applied to a smart object the clipping mask will be applied to the shadow as well. Right click-> Convert to smart object

• Why the reader most recent Flash for Windows so plant them?

  Why the reader most recent Flash for Windows so plant them?

  I use the latest update of Flash player that has developed on this computer.  It's Flash player version 11.1.102.62 on a Windows 7 computer.  I have experienced excessive crashes Flash player in Firefox and Internet Explorer.  Since the two latest updates of Flash player who, it seems to come from Adobe it is a big problem with Flash player crashes.

  Previously, there was no problem... then there was the update yesterday and problems began.  I was hoping the last update would have fixed this problem, but now it's worse.

  Is it possible to return three updates and install older Flash Player?

  Adobe will never get this fixed number?

  Thank you

  Digi

  reproduce crashers regularly contributes to refine specific problems.  the random thugs are difficult to follow and difficult otherwise.

  the latest version of Flash Player, 11,2,202,228, were announced last week.  It would make 11,1,102,62 version two behind.  Would you mind upgrade to the latest version of the player?  There are a few crash fixes in our last offer.  You can go here to update: http://get.adobe.com/flashplayer/

  It is possible to downgrade, but it is not desirable that the old version will be always up-to-date with patches secuirity.  If you option for this, you can retrieve older versions here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#main_Archived_v ersions

  Note: Make sure you completely uninstall the existing version.

  Thank you...

• Confirm that the language packs are useless for English

  My Linux distro came with Firefox ESR and pre-installed language packs (also Thunderbird and language packs). There are two entrances of package in the software for each of these applications Manager: the main program and the language packs, which indicates that all the languages in the language packs are installed/removed as a single unit. The online description indicates the language packs are used for 'other languages '. It does not say that the 'standard' language exists or if all languages require some language pack. I use English. Before you uninstall the language packs for both products, I want to confirm that they are not necessary for English. Thank you.

  Thank you.

  Regarding the update, makes the subject of another post. I have it receive the notice of the update, but the update process does not (the audit online says that my version of 24.4 is the most recent and does not perform an automatic update.) If I click on the update notice, "connecting" message comes on to always without completing the connection to the update server. I understand that there is a way to install it manually, but it involves too many steps I'm not familiar with.

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Why the outputs that are grouped in a waveform chart in a loop of Simulation show distortion?

  Is anyone know why the outputs that are grouped in a graphic waveform distortion to see the Simulation loop unlike these forms of output wave that are placed individually in each waveform graph Microsoft Graph?

  
  

• No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer?

  No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer? Have tried many times, keeps on coming it was not installed.

  See the RESPONSE of two 2 messages in this thread-online http://answers.microsoft.com/thread/0deeacb6-115c-419d-ac37-03ff8927b79c

  Tip: Start with Christian script execution.

• I opened a folder from an e-mail, made changes to the word document, and thinking that I had saved on my hard drive, I closed it. Now I can not find the file with the changes. Is there anyway I can retrieve the file with the changes that I made for her?

  recovering files

  Follow these steps to find the file;

  Go to folder options in Windows Explorer > organize, click the view tab and select "Show the hidden files and folders" and uncheck the box on "Hide protected operating system files".

  Copy and paste the following text in the address bar of windows Explorer. Don't forget to replace "XXX" with your own username (or one that has been used by modifying the file), C:\Users\XXX\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5

  Now you're going to see some folders, the file you are looking for must be in one of these folders.

  Thanks to http://vistahelp.wordpress.com/

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.