Why the different version displayed?

Similar Questions

• Why the latest version allows only two addressed to be visible?

  Usually, I have send emails to a group diverse in people and wants to be able to see all the people to whom I send e-mail. The latest version has only room to view the two addressed before forcing a made scroll to ensure that all the wanted names are there. WHY IS IT BETTER THAN THE OLD METHOD?

  Bob Rice aka bigears78 (journalist) and anyone else affected, sorry for the inconvenience caused by changes in the latest version TB31 recipient box. and some of the answers here are not accurate.

  (1) prior to TB24, lines of default recipient number is a 4. In TB24, we changed that with my patch in Bug 425451 to become 3, assuming that this will save valuable space vertical for a large number of users, given that the entire header area consumes a lot of screen real estate. For users who regularly use and want see more than 3 recipients at the same time as a default value, there is a hidden pref:

  Tools > Options > advanced > General > Config Editor
  mail.compose.addresswidget.numRowsShownDefault = 3;

  (2) since time immemorial, you can drag to manually enlarge the composition for this specific message header area (not retained, because your next message will be different; use pref by default lines above). Before TB31, drag the splitter under the subject field. TB31 leave, drag the lower border of the header area of composition, i.e. the lower border of the toolbar put formatting in the case of HTML messages.

  3) there is a bug in TB31 (at least on Windows XP theme which I use) that the vertical space of the widget has been calculated too small; Therefore, there is a scroll bar as soon as you start a new message that should not be there. When you add multiple addresses, these few missing pixels can cause the 3rd row to never be visible only IF you expand the widget manually as described in 2) above, or increase the number of default rows, see 1). If you find yourself with a maximum of 2 lines visible at any time, which will be mainly seem to be only 1 row because the empty line account also (for details, see 4). I think that we can turn 1056404 Bug to cover this issue.

  OT: I had notified volunteer developers responsible on this issue via PM in April, in time before the release cycle, but did not answer because they were not happy with my other suggestions, how to make the new a little less strange strange flat header by making at least the header (to, CC,...), the type selectors married in rather that stand out for no reason.

  (4) in TB24, entry in the last line recipient has confirmed this recipient and added a new blank line; Tab would just activate the subject field. In TB31, tab behaves now as input, also creates a new line. There are advantages and disadvantages of this behavior, but we have heard several users that they are not happy with this, so we are coming back that the change to the old behavior in Bug 1043784 .

  That's the news experts.
  I hope this helps.

• Using variables shared between the different versions of labview

  Hello

  I look at the use of variables shared between two different versions of LabVIEW. We have a 2 of the PXI system and a single PC. We are currently updating the code on the PXI system to 2014, but the PC still work 8.2.1. We now need a map of ARINC-429, which is executed only 2009 +, that is why we are to day. First tests show that shared variables do not communicate between the two. I think that the reason may be that the PXI running the version of variable motor 2014 shared, while the PC is running 8.2.1, but I don't know if it is precisely for this reason it does not work. Is there a way to communicate between two different versions of LabVIEW with shared Variables?

  Thank you!

  SOLUTION

  There are two key elements in the process of installing software that are essential for PXI to communicate with another version of LabVIEW: Legacy Server Support Variable and Variable Support of Legacy Protocol. The first, in charge of the Protocol, was automatically installed through the selection of the other ingredients (although I do not know which triggered its installation). The second has been nested in the Protocol, but was not selected automatically.

  

  

  The Protocol allows the PXI 2014 connect to shared variables hosted by devices 8.6 or an earlier versions, while the server allows before 2009 devices to communicate to shared variables hosted on PXI of 2014 (which was the initial problem)!

• Why the current version of firefox installs adware?

  When I downloaded the latest version of firefox it installed adware so that my computer is unusable. I used a previous version on my other computer and I liked it very well why ruin you a very good program.

  You can also check if Firefox has a non-standard connection setting? It's a way to alter apparently valid sites. You can do so here:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  The default "use system proxy" should piggyback on your Windows/IE 'LAN' settings. But you can try 'No proxy' to see if that makes a difference.

• Why the latest version of firefox insists not flash player is outdated and blocks read, but this is the last update

  Flash Player Plugin between 11.0 and 11.7.700.169 (click-to-play) has been blocked for your protection.this is what firefox tells me but when I check the Add-ons Manager, it says version 15.0.0.239 is installed.how can get firefox to recognize the correct version

  Hello, adobe has released a critical fix for a vulnerability in its version of the flash plugin, which is apparently already exploited in the wild. That's why firefox will block the precarious versions which run by default on Web sites for your protection. https://helpx.Adobe.com/security/products/Flash-Player/apsb14-27.html https://addons.Mozilla.org/Firefox/blocked/p794

  Please update Adobe Flash Player version 16.0.0.235 as soon as possible, that you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin-based browsers).

• Why the latest version has removed the padlock for sites that require a login?

  It takes too much time on the high speed cable, to log my banking online. My body's response was that the latest version of Firefox had removed the icon of the lock for sites that require a connection. I want to know why it was deleted.

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server. So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL. The lock feature has been replaced by the identity button of the Site on the left end of the address bar (address).

  https://support.Mozilla.com/en-us/KB/site+identity+button

  http://www.mozilla.com/en-US/firefox/security/identity/
  

  This has actually existed since Firefox 3.0

  If you still want a padlock icon also then

  https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
  

• VCS ExpressWay and control over the different Versions

  Hello world

  Can be used on a newer VCS Highway then control VCS?

  Currently we have a highway of VCS and a tester of VCS X6.1 running. I plan to upgrade to X7.2.1 and will temporarily have the South, the new version with the old version running control.

  I don't see any documentation that may not be completed. Especially since X7.2.1 had interop tests already performed with X6.x.

  Mark

  Hi Mark,

  Please check the following page 8, section "Prerequisites", document

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  Prerequisites

  Before you begin the configuration of the system, make sure that you have access to:

  -Guide the administrator of VCS and VCS Getting Started Guide (for reference purposes)

  -control of VCS running the version X 5 or later

  -a PC connected by Ethernet to a local network that allows to route HTTP (S) traffic to the VCS

  -a web browser runs on the PC

  -a serial interface on the PC and the cable (if the initial configuration must be performed on the interface series)

  Answer to your question, there is no problem if VCSE and VCSC installed on versions of different software.

• Details of the hardware for the different versions of Hyperion

  Hi all
  
  can you please provide a document that has the details of the hardware and its cost to different versions of Hyperion as:
  
  Hyperion Version 9.2.x
  Hyperion Version 9.3.x
  Hyperion Version 11.1.1
  
  Please provide soon please.
  
  Kind regards
  Rigaud J

  I'm not sure you'll find too much documentation on the exact details.
  If you go to http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html
  It should give you an idea of the minimum specifications for each version.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What PSBD different format for the different versions?

  Hi all
  We are working on upgrading from 8.4 to 9.0 financials. I just want to know
  If the format PSBD for EDI different checks for different versions
  OR
  does rely on the map in inbound for VCHRDEFN?
  
  Please clarify for me.
  
  Thank you.

  Yes.
  The mapping of VCHRDEFN was changed from 8.4 to 9.0.

  Kind regards
  Hanane

• Why the old version of Flash made stay after downloading the new version?

  I downloaded the latest version of Flash, but the old version remained in my modules. I tried to deactivate the old version, but both versions have shown as disabled? Should I leave the two versions that enabled?

  Hello

  Go to your message control and uninstall the old version or uninstall both and reinstall the new version:

  • http://get.Adobe.com/flashplayer/
  • How to uninstall plugins

• How many connections to a shared folder is allowed in the different versions of Windows?

  I have Windows 2000 with a shared folder to which only up to 10 computers can connect. Is there a way to increase this limit, and if not, is this upper limit in later versions of Windows? Thank you.

  This is the limit on all but the server versions.

• BlackBerry smartphones, why the latest version of the software does not release 4.0.0.141 work?

  I just installed the latest version of the software for the storm, and many do not work. RIM/BlackBerry take no responsibility nor will be my supplier of Vodafone. Has anyone else noticed that the release is not right and what can be done (apart form dating from 4.0.0.78 what I did)!

  The software is licensed by RIM Vodafone UK noiw say it is buggy, and they do not recommend its use. Thanks for the help

• Why the phone Version appears as the desktop version when it is online

  I designed a website in Adobe Muse. I also did a layout of the phone. The site is now online. On the phone, the site opens in the phone, layout, but after the use of navigation, the site was moved to the desktop version, which is not readable on the phone.

  What can I do to make the phone work properly?

  Looks like you need to update your navigation so that the buttons link to versions of the pages rather than the office phone those?

• Why the upgraded version would be the first option when buying a product? Oh is it cheaper...

  Just went out and bought a serial for my trial version of Lightroom 5. Clicked on buy series when I opened the trial version, created the site Web, connected and clicked on Lightroom and click purchase.

  Happy days. Received my serial number and he came!

  PROBLEM: The series that you have entered is an upgrade!

  In no time he put to me I bought a version upgrade. Contacting the customer service they informed me that the only way to solve this problem is to cancel the order and reorganize the full version. I explained that it is what, to my knowledge, that I bought it.

  So in the end, I had to cancel the order, but unfortunately do not have the funds in my account to purchase a second license because my refund will take about a week to process.

  So now I'm without software and a hole in my bank account. Now im thinking that when my dose of refund come through I probably used sentence buy this software after all these hassles. Bravo to lose a potential customer!

  PS.

  I went back to re to see what I had done wrong and it turns out that there is a small triangle that you must click before pressing on buy to say you really want to buy a full version. And if you click on that there is nothing to say that your do not buy a full version. Very confusing and im sure im not the first person to complain about this.

  If you click on buy a serial number when your trial period is exhausted, a series of upgrade should not be produced by default to that you are headed.

  That is my rant. Adobe sort!

  Thanks 11sunny11, I was able to verify that your refund is the treatment.  I you sent a private message separately on this issue.

• Why the connector pane displays a different connector for lvclass?

  Picture is worth 2000 words...

  What is the special problem with the connectors on the left & right superiors?

  I have other lvclasses, but they do not have the points X shaped...

  

  Those who are marked as dynamic connections distribution (take a look on where you would be required). An entry from JJ means that it is a VI that is designed to be substituted dynamically at run time according to the type of class actually present on the wire.