Why the preview window freezes with two images?

Similar Questions

• A lot of images. How to select by using the preview window (work area)?

  I have 15 images that I put on a background (picture 16) in the style of a collage.  Each image has an adjustment layer bound to her for me to mix an image manually in the next.  This worked fine, but now I have 15 images with rounded edges and I learned how to change them, I hit a problem, that I wasn't expecting.  My planned process is to move these images in a variety of sizes and positions until I got the look I love.    The only way I could work on that's too painful (scrolling up and down my palette of layer until I find the picture i took for target, select the layer, Ctrl + to highlight in the preview window and then move and size).  With 32 layers, it is very tedious.  It makes more sense for me to select in the preview window (even if it means hitting a hotkey multiple times until I select the picture I want to work with).

  Maybe I approach the task entirely the wrong way.  I'm willing to try any suggestion.  I like to do this kind of project, and I moved to Adobe because I thought that I could take advantage of its extra power to do a better job.

  I am relatively new to PSE 8, but not new for photoediting.  I, are looking for an answer on this forum and the web in general, but can not get close to a solution.  Thanks for your help!

  Edit: Using the technique I describe above, when I move to the work area (what I called window preview), the layer I selected off the coast of the Layer palette has a finely dashed around it, there is another area apparently random, highlighted by a blue line and line dotted yet another seemingly random area highlighted with a heavier white.  These hold the key my solution?

  To make it more clear what I'm trying to do-, here is a brief description of it: the final result is a print for a friend who was a torch for the relay of the Olympic flame to 13 x 19 inches.  I have a map of Canada with the road on this issue and 15 images are pictures of his 15 minutes of nirvana.  I want to fuss around with transparency, size, rotation, each of the images.  I am very happy with the adjustment layer feature (which allows to paint me with transparency).  the rest, I thought would be easy, but...

  Yes, that's the downside of the technique, it's that you need move the brush and gum to get your mask just a clipping mask.

  No way around that.

  As far as being able to see what your paint before painting, make a copy of your image layer and put it at the bottom of your layer stack

  Then, set its opacity to say 75% or so to be semi-transparent.

  Now you can paint on your layer mask to bring your full image. Hide or display the background layer let's you see the result and quickly return the Semitransparent 'outline '.

  See attached screenshot.

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• All my picture on my video file previews blankets have opted for coverage of the generic windows folder with balloons hot air on them

  original title: video files icons?

  All my picture on my video file previews blankets have opted for coverage of the generic windows folder with balloons hot air on them. I have to open it with media player to know what is the file? How to bring back my preview? I tried to convert the format of files and checked my file associations that they seem to be fine.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Why can't I drag stuff around in the preview window?

  Alrighty, so I'm transition from Premiere Pro 2.0 to the latest version with the creative cloud, and I'm having the time more difficult trying to find a function!  I * used * to be able to drag around the Visual elements in the preview window and position them as I am pleased!  But now I can't click and drag anything in the preview window.  Could someone explain this to me?  I can't find answers through the usually reliable Google search!

  Thanks in advance!

  Nevermind, I figured it!  Looks like I needed to select the clip that I wanted to move/drag in the timeline itself and then select the effect of 'Request' in the 'Effect Options' window, * then * I was able to drag and move this element as much as I wanted to!  See, I can learn!

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• Strange blue lines in the preview window

  I opened bridge today and found the blue lines all in the preview window. They are there for each image and do not go far when I stopped. I have reset the workspace, preferences and hides nothing doesn't. I'm no expert with Bridge, but I can't find any solution for this! Any help would be much appreciated.

  Hi angstlyplatypus

  Try to restart your computer once.

  Kind regards

  Sahil

• Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.

  Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.  I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback.  Itself doesn't freeze, I am able to go into my settings and change again within the sequence.  It's only the source monitor.  Anyone know this problem and is there a solution?  Thank you!  My apologies if this has already been discussed in another post.

  I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.

  Under the key sequence, uncheck preview Composite during Trim.

• My photos and video are blue in the preview window

  Construction of a video and I'm so frustrated that many pictures/clips in the preview window are blue until I skimmed through them.

  It does not matter how much, or little are here, some are always hidden.

  Try restarting the FCP X with the Option-command which is held and you can reset the preferences of FCP X.

  Al

• Why the results research print in two color blue and black fonts?

  Original title: research

  Why the results research print in two color blue and black fonts?

  In general, the files and folders shown in the Explorer with the blue text are files and compressed files.  Black text indicates a normal file or a folder.

  writing in the new message: * e-mail address is removed from the privacy... *

  Why the results research print in two color blue and black fonts?

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.

• Very small legends closed in the preview window, how to change?

  Hi all

  I imported a file (created with AegisSub) STL with subtitles in first Pro CC (later) and so far it worked well. The caption file is located in, I can put it on the timeline and even the time seem to be going well.

  The only problem I have is that the text on the preview window is very very small and thin (nothing compared to the text I see in all the tutorials). Also, I can not change the background of the text in the legend editor window.

  I spent all day yesterday on research on how to increase the font in the preview window so that I can edit video without the need to have a screen that is big 3x3m really comfortably. It seems to me that it should be a simple operation, that the question crosses as already quite ridiculous. But legend supported (or the whole thing subtitle) pp is so rudimentary that I am very well prepared to receive the response to "man I'm sorry, can not do!" something.

  See you soon,.

  Marc

  Hello

  Once decode us captioning, of any standard, it is the size that it is. We don't have a way to change the size of the police, once decoded. According to me, it has something to do with the closed captioning standard.

  I appreciate your points - I'll put a bug in Premiere Pro that the fonts for the Teletext / LSE is be decoded small - and also put in a request for Premiere Pro that the user be able to increase the size of the police after decoding of closed captioning.

  Still, Premiere Pro is not the final arbiter on how these legends will appear - check to see how other devices are reading these stories, because the font size varies depending on what other hardware or software is used to decode closed captioning.

  Thanks again for the time you took to give your comments here.

  All the best,

  CM

• PSE11 - can I increase the size of the preview window when you use filter > render > Lens Flare?

  Hello

  I am trying to create an image on the theme of Christmas in Photoshop elements 11.

  There are four candles in the image, and I want to add a subtle touch of light parasite the flames of candles.

  My problem is that the preview window that appears when I select the Lens Flare filter is incredibly small, and it is extremely difficult, if not impossible, to accurately position the effect:

  

  I noticed that some filters and effects have big enough insight or zoomable windows or even show the effect changing on the original image, but the preview for Lens Flare window allows any of these characteristics.

  As a rather cumbersome, I go through this procedure:

  • Create a layer duplicated my image and then hide the background layer
  • Select a small area of the upper layer around the spark plug/s
  • Select Inverse and delete the rest of the layer
  • CTRL + D to deselect
  • Now, if I select the filter, it displays only the small selection instead of the entire image
  • Add the effect of Len Flare/s
  • Display the background layer and Merge visible layers

  

  Please tell me there is a way to increase the size of the preview window, or a quick workaround better/more solution than what I'm doing now...

  Thanks a lot before any advice

  Steve

  A faster solution would be:

  1. Select the area you want to add to stray light. For example: in this case I would choose the candle using the marquee tool.
  2. Run the lens flare filter.

• Vertical lines in the preview windows

  All of a sudden I see vertical blue lines in the preview windows, for a clip, I have been working for some time. These just appeared and doesn't seem to be actually in the source material (an avi file that I saw in another application).

  I have attached a screenshot to illustrate.

  Thanks for any assistance with this - it's a bit confusing...

  NVIDIA graphics card?  Set the 3D settings 'Let the application decide' and the lines disappear.

  -Jeff