Printer DESKJET 3070

Similar Questions

• A black HP364XL cartridge does not fit my printer Deskjet 3070, even if you advertise it - why?

  I bought a black HP364XL cartridge for my printer 3070, but it is not well announce it as it should be - why is - this?

  Hi people, just to let you know there are different sizes of 364xl black print cartridge...

  More details HERE

  Figure 1: Example of the Black XL cartridge update installation with space on both sides

• Code printer deskjet 3070

  Hi, I have just to register for eprint and now my original code of the printer is invalid. How can I create a new one? (Probably wrongly) I followed the instructions to go to settings, then in the wireless, but the only obvious option simply turn wireless on or off without producing a new backgrounder. Can anyone help please.

  Do you mean a 3050?

  If so, click on the ePrint button to go into options ePrint.  I think turning off ePrint and then allowing him to perform another print with your new code printer, which is good for 24 hours, so make sure that add you your ePrint printer Center within this period

• HP Deskjet 3070: cartridges missing or defective

  I put new cartridges in printer Deskjet 3070 and now the error message is displayed: cartridges missing or defective. I placed the new cartridges and cartridges is not error. Are the cartridges default?

  Hey Cheeseslicer,

  The best thing you can do is to give the printer a hard reset

  Also replace the cartridges might solve the problem.

  Insert the old cartridges you also find the error?

  Please let me know.

• DeskJet 3070 does not

  I bought a new Deskjet 3070 and it doesn't work.  I've been in touch several times with the help of HP in Singapore, and 12 days later I still don't have a resolution.  I, has so far, spoke with Michelle in customer service, Rachel in technical assistance (who accompanied me through a re-start of the printer) and have received and responded to emails of both above, Steve, Samantha, Jason and Martin all have to thank me for my patience, while also offering to help me more.

  The last email received reads as follows:

  Thanks for writing in the HP customer service.

  If I understand your post that you were not contacted by the team concerned about the replacement of the unit.

  Anne, we have already sent proof of purchase sent by you to the team concerned. The dedicated team will be back you shortly regarding the replacement of the device. Thank you for your patience.

  Another email indicates that the team "concerned" is the hardware support or phone support team.  There seems to be some confusion about who is able to make a decision about a new printer that doesn't work.  I, of course, simply look for a replacement (again, compared to renovated, of course).

  As I seem to be getting anywhere here, hoping that the global support desk might be able to intervene and demonstrate the type of customer service that your loyal customers of HP are used to.

  Hi Lauretta93,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall printer Deskjet 3070 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-93166-1&cc=us&DLC=en&LC=en&OS=4063&product=5068754&sw_lang=

• HP Deskjet 3070 with windows 8

  Could someone please help me find the drivers for HP Deskjet 3070 for windows 8?  The CD that came with the printer doesn't support windows 8.

  Thank you

  No problem at all, I'll be happy to help you find the drivers for the printer Deskjet 3070.

  Here is a link that will help you with the drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109010-2&cc=us&DLC=en&LC=en&OS=4132&product=5068754&sw_lang=

• DeskJet 3070 unable to connect to the ad hoc network

  Hello

  I'll put up my new HP Deskjet 3070. This printer has wireless capability. I would use it wireless with my laptop Macbook Pro (OSX 10.6.8).

  I don't have a wifi network or router at home. That's why I created a wifi (one to one) on my mobile ad - hoc network, named MyPrinterNetwork. This is the type of network used to connect a computer to the other on wifi. MyPrinterNetwork is then visible to other devices compatible wifi (other computers, smartphone,...), and devices can connect to the network (and share files or Internet by wifi). This thread http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Connect-Deskjet-3070A-wirelessly-to-my... suggests that this printer is able to connect to ad hoc networks.

  I then launch the HP utility to configure the printer. But when the screen appears with the list of available wifi networks, MyPrinterNetwork is not in the list. The list contains only the other wifi available through networks points (values in wifi mode column are all infrastructure) access. If I try to enter the name of a network manually, the software indicates that the printer cannot see or connect to this network.

  Executive Summary:

  -Someone would confirm that the printer Deskjet 3070 is able to connect to the ad-hoc wifi networks?

  -If so, why my adhoc network isn't in the list in the configuration utility?

  Thanks and greetings

  Johnny

  Hello Johnny.

  Deskjet 3070 Network Infrastructure support only, it does not support the ad-hoc connection.

  As you can find in the user manual:

  Traditional wireless connection (requires router)
  
  To connect the HP All-in-One to an integrated wireless WLAN 802.11 network, you will need the following:
  
  - A wireless 802.11b/g/n network that includes a wireless router or access point.
  NOTE: 802.11n will only support 2.4Ghz
  
   A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP All-in-One on. 
  
  Page 33:http://h10032.www1.hp.com/ctg/Manual/c02887357.pdf
  

  As an alternative, try feature that allows the mac to act as a router in Mac OS X internet sharing Infrastructure mode:

  http://docs.info.Apple.com/article.html?path=Mac/10.7/en/mchlp1540.html

  A limitation, you should be aware, the Internet sharing security supports WEP in shared only authentication mode that is not supported by the printer you can find below:

  http://support.HP.com/us-en/document/c02871178

  Therefore, you should keep sharing without security password in order to connect the printer to the network.

  It will be useful,

  Shlomi

• DeskJet 3070 ceased to print a few days after replacing the black print cartridge

  Please help me, I have HP Deskjet 3070. There works well since then, but I replaced just the black cartridge with original ink and he confirmed that it was a real ink, I printed a few documents and everything was fine and it's just less amonth ago.

  But unfortunately I turned on the printer a week later, but it prints, it only passes through the paper as if it is printing but instead he brings her on a white sheet.

  The task of mentenance using I could see the State of health, says the good. Show full of ink cartridge ink level. Device report - derniŠre indications affixed some pink, blue, yellow rectangles and the printed report print 4 holders.

  I noticed someone has posted a simlar here question one obtained help same day via private message that he has fixed his problem, I commented here a week ago and had asked for help, but have had no response to date.

  Today, I installed a new black ink, thinking that he could be in ink, but she does not always print anothere.

  Please help me.

  New replacement printer arrived today with the new inks, installed game machine with the new inks and everything works as it should. Old machine is to immerse for recycling as advised.

  I'm relieved and I appreciate the after sale HP just rendered services. Although I am a little worried and now fear that it could happen again "after the guarantee" since no clear explanation is given in what concerns what could have caused the failure. And judge with an option of replacement is the best solution, it seems like the cost of the den could be greater than the value.

  Finger is crossed, I hope that it will serve this time or at least give reseonable service before getting on my nerves.

  Thank you HP.

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• HP Deskjet 3070 will not print black.

  I have a HP Deskjet 3070 and recently brought a few pack hp ink 364 ink combo from Amazon. The well installed ink cartages. When I try to print in black continues leaving as Faded or not at all. It's strange look I just made them. The printer seems to print correctly using the other colors like red or blue. I tried to alline in the printer, but it failed. can you help me

  Hi, is the printer under warranty?

  Troubleshooting steps

  http://support.HP.com/us-en/document/c04030353

  HP Support phone numbers

  http:// Welcome.HP.com/country/US/en/wwcontact_us.html

• print without margins Deskjet 3070

  Hi - I tried to print without margins on A4 with my Deskjet 3070, but whenever he has a white border on one side and along the bottom of the page. I've checked and checked that I put it up to do borderless, but I still get the white edges. Can anyone help?

  Thank you very much

  Hello

  I'm sorry. Please use the following software:

  http://www.IrfanView.com/main_download_engl.htm

  This free software allows WYSIWYG, very easy to use for printing (and a few other things).

  Kind regards.

• Printer HP Deskjet 3070 all-in-One - the IP address will not save

  Hello

  When I connect my printer to all-in-one HP Deskjet 3070 - B611a and try and update the IP address manually, it says it is in place and I press ok but nothing happen need me just indented on the same page but with the address IP is entered.

  The same things happen when I try the wizard he fines the Wifi network and accepts the wifi key tells me im change network, but then after that just takes me back to the first page of the wizard as nothing has happened.

  Almost as if it won't save or flash memory.

  Please help someone.

  Thank you

  Bryan

  Hello Odbod22

  By turning the printer power switch will usually change the IP address, unless make you it static or unchangable. The reason for routers use a protocol called DHCP that tells it how to distribute IP addresses. So, it is not uncommon that address to change. To avoid this, you must assign a static IP address on the printer.

  To do so follow the link below and search for "Step 6" how to set a static IP address.

  Printer keeps no connection Wi - Fi

• option e-printer hp deskjet 3070 does not work

  Hello

  I can't e-printing on hp deskjet 3070; have a windows 7, 64 byt BONE
  someone who can help please? Thank you very much.

  Hello

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description provided, looks like you are facing a problem during access eprint.

  The question you posted would be better suited in the HP Forums; We recommend that you post your query in the HP Forums to get help:

  HP Support Forums: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/bd-p/Photo

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• HP Deskjet 3070: I try to print red, but it comes out yellow

  Hello

  I have a HP Deskjet 3070 e-all-in-one - B611a. I was able to print correctly before of my HP Pavilion laptop to Windows 7 32-bit OS, but last week my printer started acting strange. When I try to print the text in red, it comes out yellow. When I try to print a purple variant, he leaves little green lifestyle. If I want to print Yellow, blue or black, it is printed correctly. I checked the ink cartridges, they have been placed correctly. I cleaned the print head, did not help. It seems as if my printer cannot print red more or the Red cartridge is somehow filled yellow ink... Can someone help me please?

  THX,

  Frederik

  It seems that the magenta ink is not printing correctly.  The steps in this troubleshooting page can help.  If they don't resolve the problem the message here can help.

• DeskJet 3070 printing with cartridges installation

  I installed a printer HP Deskjet 3070 for a neighbor. During installation, I used cartridges HP 364 'standard' instead of the cartridges 'setup '. The installation program continued--I've learned since. I installed now the cartridges 'setup' and that you have now configured the printer successfully.

  Can you tell me if we continue using the installation as usual - print cartridges until they are empty or need to change standard cartridges now?

  On the subject of standard cartridges, we have not been able to the caps on the top of each cartridge. Our concern is that they can dry and be unusable. Do you know how long (very roughly) the cartridges last if they are not stored in this way. Should we switch to the standard cartridges now rather than waiting the implementation empty?

  continue to use your cartridge installation first and when they will be empty use the cartridges 'standards', if the CAP custom fit more on the 'standard' cartridges put them in something sealed so that they don't dry out until you need it.