Why then I jump to the current slide this time?

Similar Questions

• Why don't the current slide?

  Why not make the current slide, but audio areas?

  Not at all, for the most part it is not a subfolder. But your problem is that you don't have it on a network location, it must be on your system! And you have projects implemented cache, probably also the normal projects on a network drive. That's your problem.

  Lilybiri

• Text-to-speech audio continues to play for any other slide - but the current slide is suspended from the output

  Captivate 8.0.1.242 - Windows 7 64 bit - swf format.

  
  

  I have this weird error. I have the audio text to speech in my classes. I don't want the PlayBar of captivate. So I have buttons in the content to navigate forward. Each slide is hanging out and waiting for the user to click on the buttons navigate forward. My sound works for the first 2 slides text. Otherwise said, he plays as in the timeline and then stops. Waiting for the user to click on the button before you go to the next slide and the same routine. But after 2 blades, it will not stop. He continues to play the whole audio other slides in the whole cptx. But the current slide is suspended. So I hear everything supposed to be played for other slides, but all I see is a slide.

  
  

  When I click on the next slide, he begins to play the audio where it supposed to start for the current slide and plays again all other text in audio from the other slides. This is repeated again and again. Anyone have any idea why this is happening?
  

  Check the calendar for audio clips, increase the duration of the slide a little and make sure that there is a small space before and after the clip.

  Sorry wanted to add a screenshot, but this feature is currently disabled on this forum.

• Review the content in LMS, Captivate jumps to the last slide

  I have a course with multiple files in the tree. Captivate times as its content only to fines, and it triggers the following file, after studying all the slides view (s). However, if the student wants to go back and review the documents, Captivate flash the first slide, then jump to the last slide.

  I escape Version and the unchecked Session ID.

  Pass/fail check

  SCORM 2004 checked

  Report to the LMS as a Score

  Slide views only - completion 100 slide view (the number of slides or? the percentage of slides)

  Level Reporting = Interatction and partitions

  I also have the SendTrackingDataAtEnd value model

  Is it possible to have a CP just stay on the first slide?

  Thank you.

  Kind regards

  Kevin

  Hello

  Maybe turned on bookmarking and LMS works this way in this case. Check Quiz preferences, the LMS customization settings. Try to check the option "never send RESUME data" and publish again.

  Lilybiri

• jumps to the last slide

  Whenever I run my file captivate published since the html page, he created, it begins on the first slide... and jumps to the last slide in the film. I can use the table of contents to return to the first slide again... but I don't want to have to do, of course. This could be because she jumps to the last slide just as it starts?

  I need to present this today... help would be greatly appreciated!

  Thank you.

  Margin

  Hello

  Try clicking project > Table of contents, then settings... button. My guess is that you have enabled the 'Self Paced Learning' and you must delete it.

  

  After you make this change, publish again and test.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to get the number of the current slide in Captivate 9?

  With the help of Cap 9.

  Is there a system variable containing the number of the current slide?

  I build a quiz with a drag and drop interaction in the pool of questions. Naturally, the built in Question x of y object is not included, so I have to build a replacement of some sort. Found some old posts on this topic, but the proposed solutions do not seem to work with the current version of Captivate.

  Yes, cpInfoCurrentSlide.

• 6. trouble with pieces of the slide next poster/bleeding on the current slide in Captivate

  Similar to this thread - http://forums.adobe.com/message/4734635 - where unfortunately no resolution has been published.

  I use 6 Captivate and I have a problem with pieces of the next slide after the current one, display/bleeding on the current slide.

  This is visible when published.

  There is no transition on the slides.

  It is published in SCORM format, but the error also exists on the pdf file when it is published as.

  Any advice on how to fix this please?

  Please see screenshot below. Thank you.

  

  Disable the compression options in the preferences one by one and publish again until you see the results.  It is usually the advanced project Compression option that is responsible.

  See this page on the project preferences:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/how-to-set-up-preferences

• How to restart the current slide in captivate?

  Hi all

  I have a slide in captivate 4 that contains several boxes that appear in the same place as the last when we click on an "ok" button (I use the chronology of fade in and out relevant legends). The customer asked when you get to the final, a watch reset button which will reload the current slide, so you could read it again, if you need (weird!).

  I'm sure the answer is obvious in the face but can't find a relevant action for the button. Could someone help please!

  Thanks in advance

  Chris Maile

  Hi Chris,

  Try to resolve your problem:

  slide1 is the slide where - that you want a button that takes the departure of slide1.

  1 have a fake Blade (say D slide) just before the slide 1.

  2 have a button on slide 1 which would have 'Jum'a drag' action and would take the user to the D slide.

  3. ask to "go to the slide" action on the OnSlideEnter bone slide D and go to slide 1.

  Let me know if this helped you to solve the problem.

  Manish

  http://blogs.Adobe.com/Captivate

• Still some errors in the backup, but this time less.

  Still some errors in the backup, but this time less.

  RMAN > backup database;

  From backup 13 / SEP / 17

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 26 type of device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/09/2013 20:18:25

  ORA-19602: no backup or copy of current file in NOARCHIVELOG mode

  continue other job steps, not a not working will not re-run

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  including the current control in the backup set file

  including current SPFILE in the backup set

  channel ORA_DISK_1: starting piece 1 13 / SEP / 17

  channel ORA_DISK_1: finished piece 1 13 / SEP / 17

  piece handle=/u01/app/oracle/flash_recovery_area/DB11GR2/backupset/2013_09_17/o1_mf_ncsnf_TAG20130917T201824_93kwblqh_.bkp tag = TAG20130917T201824 comment = NONE

  channel ORA_DISK_1: complete set of backups, time: 00:00:01

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/09/2013 20:18:25

  ORA-19602: no backup or copy of current file in NOARCHIVELOG mode

  RMAN >

  Please can someone tell why I have errors?

  Thank you. Dan.

  Why you send messages again the same question?

  https://forums.Oracle.com/thread/2582524

  Thank you!!

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• McAfee Anti-virus works do not "computer couldn't download the solution at this time." Check that your computer is connected to the Internet tries to download the solution later. » »

  • It is said that my mcafee virus scanner does not work.  The answer I got was "your computer could not download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later. "I tried for a week without result.  The same answer.

  Thank you.

  Lulu

  You must contact McAfee as we do not have knowledge of their products

• Unable to connect to the server at this time!

  Hey guys,.

  We are experiencing a problem with our multifolio app. We continue to get this message when downloading folios: unable to connect to the server at this time.

  Now, normally we put this to a bad internet connection.

  This is not the case.

  We constantly download problems in this app. At the beginning it is seems to be very well; the blue indicator bar Scrolls merrily along until suddenly it stops and goes back initially, continues still for a bit and then, BOOM! Unable to connect to the server at this time!

  The funny thing is when I go to the Adobe Content Viewer that doesn't happen. Same files in the same place, but with a different application. It may take some time, but it does not stop and finally finished the job. I get the download.

  The name of the application is Reykjavik Shopping and City Guide.

  Any thoughts? This is a serious problem and could impact our business in a bad position.

  Thank you

  Yngvi

  Please contact support for assistance with this enterprise. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• I tunes store cannot process of the purchaeses at this time. Please try again later?

  I tunes store cannot process of the purchaeses at this time. Please try again later?

  Yes, there are questions according to https://www.apple.com/support/systemstatus/

  Check the site regularly, when all services are green you will be back to normal. It's not just you.

• BlackBerry smartphones cannot authenticate the user at this time.

  I have a new Blackberry "BOLD" and I want to get the applications I already bought on an old "BOLD".

  I go to My World and select Connect. I certainly get my Paypal account information correctly.

  I click on Login...

  I get the message "Please wait while we retrieve your MyWorld Applications... »

  A few seconds later, I get: "unable to authenticate the user at this time. Please try again later. »

  Any ideas? I searched the web and can't seem to get an answer, but I don't see many people with the same issue.

  THX

  I tried this again the PST last night, and it now seems to work.

• I have a version of Audition 3.0 new-in-box I bought about 6 years; for various reasons, it has been sitting on the shelf all this time. Now I need to install it; He moved well on my system, but I can't seem to activate. I'm trying to us

  I have a version of Audition 3.0 new-in-box I bought about 6 years; for various reasons, it has been sitting on the shelf all this time. Now I need to install it; He moved well on my system (Win XP) but I can't seem to activate. I try to use the phone activation because the machine I use is not connected to the net. How can I activate this s/w?

  You will not be able to.  You will need to acquire a special copy.  See the following topics:

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm