wiaca00d. The PNF made this file?
My computer hangs on this file at a time to the top and Defender scan
Sorry for all this.
The PNF file is a precompiled setup information file. Windows creates a PNF for each INF file to facilitate the effectiveness of the treatment. A PNF file includes information about the content of the original INF file, and the name of the INF file and other attributes of the file. The installation program uses the PNF file instead of the original INF file.
The .pnf is an image (Portable Network Graphics) file
Driver scanner USB Canon (wiaca00d.inf)
I just checked my W7 32 bit PC. The file is there, I performed a full scan with MSE, no problem.
It is possible that you have file corruption. Just to be sure that you did not, please run a hard disk error check (chkdsk/r). It will take some time.
You can view the results in the Applications - Winlogon event log source.
Tags: Windows
Similar Questions
-
Hi all
Help needed please.
HP dx2250 microtower, running Windows Vista Home Basic Edition, recently attacked by Vista Antispyware 2010. Norton 360 V3 dealt with rather late the virus, but the fall of the remains.
I am unable to open any .exe file (program) on the desktop, start menu, or through the browser. I can access the programs in opening a data file, for example, double-click a .doc file opens MS Word, etc.
The error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "
I tried an automated solution that is available via the forums (exefix_cu.reg) and also a manual suggestion to change the registry, also available through the forum.
I also splashed by and purchased Regcure, who seems to have done no difference despite who claims to have removed 1500 odd errors. So I'll be request the refund on that one.
I scanned the forums and found a large number of similar problems, but not one that is as complete as this.
Any help much appreciated
Hi all
Thanks to anyone who has seen this link and made suggestions.
I was looking at a similar, and is other problems came up with this very useful link, I am grateful to say has solved the problem.
Sorry MapDrummer, but I'm not sure if it works for XP
Follow this link to SpiritX who has the answer
Hi Justalilkink,
See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63
Thank you very much
-
Hello
Where I work, we have a phone call, saving application that creates records of calls as .wav files.
Before placing each record in long-term storage, the application creates a copy of the file (which is smaller) MP3 and then made a calculation of the free space to ensure that there is place in the long term for the newly created file storage.
As part of the application must check the size of the MP3 file that he had just created and - I thought - calculation of space under Windows 7 that determination of the size of the file is sometimes a failure.
(I think I understand, is that a .net function allows to determine the size of the file.)
My query...
If an application has sufficient privileges to create a file in a folder on the drive C: of the PC default also always have the right to determine the size of this file?
Or are these two completely separate rights?
For example, is it possible to have with no other rights granted write access?
Thank you very much.
The order of the questions, you asked:
Yes
Yes
NO.
It is indeed possible to give the file 'write' - access to the account, but not 'read' - access. However, even in this case the account can determine the size of the file.
Log in under the account you are using for the conversion allows you to confirm my answers. To see the size of a file, use Windows Explorer or the Console command "dir".
-
Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..
Hello
Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:
Note: You can print these steps or consult them in another browser.
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
Please report back to see if this helped you!
Thank you.
-
Former title: Microsoft Flight Simulator will not install on Windows 7
I have Windows 7 Home Premium 64-bit. I try to install MFS 2004. The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:
"The version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »
I have a Dell Studio 1558
Intel i5 - 520 M
ATI Mobility Radeon HD 5470 graphics card
8 GB RAM DDR3
What can I do?
Hello
1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.The link below shows the compatibility of this game with Windows 7.Method 1.We must ensure that the edition of the game must correspond with the operating system.
If you use 64-bit in this game, you need the 64-bit Windows to install it.Method 2.
If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Could not open the desktop icons - this file doesn't have a program (see details).
original title: when I do a shortcut on my desktop and try again later and access the site by clicking on the shortcut I get the following text "this file doesn't have a program (see details).
When I click on the registered Web site shortcut it does not work on my desktop & I get "this file has not a program associated with it for performing this action. Create an association in the Folder Options Control Panel. It's ok if you know what that means. I did as he said and got totally confused on what to do and what information I should include. In the end I gave up and now go to my browser and access to the Web sites of this way. His long-winded, but it works! I miss using my shortcuts! Help!
Hello
Click Start, Control Panel, add/remove programsClick Set Program access and Computer DefaultsClick Custom and select your web browser, and then clickOK. -
Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?
Hi mariart
Welcome to the Microsoft Answers Forum!
· What format of picture or video file you are trying to open using the Windows Photo Gallery?
Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions
Make sure that the Windows Photo Gallery is the default value. Steps to follow:
i. Click Start, in the search box type in default of program
II. Select set your default programs
III. click the windows photo gallery, and then select set this program as default
Link for reference: change that uses default Windows programs
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
the contents of this file cannot be decompressed the executable file that you are attemptiong to run
The contents of this file cannot be decompressed the executable file you are trying to run has been corrupted you can get another copy of the file check its integrity and try again.
You have not told us what you're doing or what program you are trying to use...
-
frustrated, the overdrive software download player!
I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!
Hello
always check the compatibility of vista programs on the link below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator
It is not compatible with vista, you can try running it in a previous operating system mode
This does not work for all programs
read the information below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
____________________________________________________________
and read this information MS, too
http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard
-
When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "
I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!
Should I re - publish so that else soeone looks like?
If you wish.
Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.Alternatively, you wait for the next person coming.
The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
IM facing problem installing some software: the error message is below to:
The version of this file is not compatible with the version of windows that you are running, check your computer's system information to see whether you need a x 86 version or x 64 of this program and then contact the software publisher
while trying to change the compatibility to windows 7 option does not appear
Windows 7 will not be included within the compatibility list, because you are already using Windows 7. Your only option is to contact the Publisher of software (the company that built the program) and get a version that works with your computer type (64 bit or 32 bit, whichever one you have).
-
Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.
I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins. These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?
Hello malaglinskom,
In addition to what Azam offered, you may try the following:
If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.
If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.
Hope this information helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
WMP will open the VTS_01_1.VOB and stop at the end of this file
I don't know if this is the place to post this question, but it's here.
I created a web page that lists the cover images all my DVDs that I have on an external hard drive and each cover image is related to the first file VTS_01_1.VOB for this DVD.
I test page to see how it works for each device I have. The page works perfectly with my tablet from Samsung, the player on the Tablet, I installed automatically go VTS_01_1.VOB, VTS_01_2.VOB and so on until the movie is done.
If I use my pc Windows 7, WMP will open the VTS_01_1.VOB and stop at the end of this file, how can I get WMP to continue to the next file automatically?
Personally, I would check the source code of the Web page of the first.
Paste the full path to the video_ts.ifo file in a new MS Word document and save it as htm. Then run the file [it should open in your default browser], then right-click on the page and select view source. Find the link - it should look like
href ="... / SomeFolder/VIDEO_TS. IFO "> D:\SomeFolder/VIDEO_TS." IFO
assuming that D:\SomeFolder/video_ts.ifo is the text that is displayed for the link
Then go to your actual Web page and discover its source to verify that the link contains this model.
If the solution is not as simple as that, then you will need to post a question in the section Web & networks of this forum I don't know enough about writing for the Web page.
To increase the chances of getting there help please include a description of what happens when you try to click on the link - rather than 'will not work.
-
Original title: need help with Windows Media Player.
Whenever I try to start Windows Media Player, in my laptop, I get this message... "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »
I use Windows 7 (Ultimate) 64-bit. I tried to download WMP 64 bit, but could not download. I have evven I tried microsoft solve this problem, but in vain.
Please, someone help me out here, with WMP.
Thank you, in advance.
This procedure has helped most users facing this problem.
- Reboot your system.
- Open cmd.exe as an administrator by selecting Start Programs/Accessories.
- Right-click on command prompt and choose Run as administrator.
- Type in
Unregmp2.exe /UpdateWMPVersion - Press ENTER.
-
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.
"The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »
I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)
Hi Bcopeland,
Thanks for posting your question in the Microsoft Community.
Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.
The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.
You can check the compatibility of the program with Windows 7, in the Compatibility Center.
If the program is not compatible, then you try to install and run the program in compatibility mode.
a. click right on the program.
b. click Properties.
c. click on the tab compatibility.
d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.
Here is an article that gives you more information on this:
Make older programs in this version of Windows
If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.
Hope the helps of information.
If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.
Maybe you are looking for
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: How to restore? You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the p
-
Hello world So I have an Aspire 7741 G, witch, I got from my father after his death. He always had problems with it, it has overheated, frozen and ran slow, he still had service, but they have failed to solve this. I said that I live in Norway. So af
-
How can I remove a drive of a Dell laptop from the control panel?
my computer not eject a cd using the Fn/F10, how to eject keys of the control panel?
-
No devices under IDE channels?
Well, I had trouble reading and ripping CDs and DVDs since I did a clean installation of Windows Vista on my computer about a month ago. I discovered that the DMA is not allowed from this article. I'll have a similar experience with this guy, and hav
-
Kodak 3.2 printer does not print
New ink installed, but nothing prints. Everything is properly connected. Can someone help me?