WiFi without installed equipment

Similar Questions

• can I use a mini ipad 4 (which has more cellular wifi) without sim card installed

  can I use a mini ipad 4 (which has more cellular wifi) without sim card?   I managed to update to 9.3.3 but the wifi keep disconnecting and lock the screen when I go to settings, Wifi.

  Yes, you can remove the sim card. The iPad will be only nag you about the missing card every now and then. But the sim card has nothing to do with wifi...

• E4200 and WDTV live via wifi without DNS error?

  Someone does it, I mean EVERYONE, got a WDTV live hub to successfully connect to the E4200 via wifi without getting a DNS error?

  My system:

  E4200, fw c. 2.1.39.145204

  WDTV Live Hum, fw c. 3.08.14

  DWA-160 (Rev.) (A) usb wifi dongle fw v. 1.80

  My sony wifi equipped blueray connected to the E4200 without boredom and access the USB HDD connected to the E4200.

  Any help, suggestions, comments are welcome.

  
  

• New wifi router installed. Why do connect to sites but lose the connection as I browse even though Windows said excellent signal. To deactivate/activate

  New wifi router installed. Because then I can usually connect sites OK but when getting around a site or to another, I lose connection even though Windows said signal is excellent. Toggle heals the problem temporarily. Two tablets under the same roof using wifi even have no problem. There is no consistency in when the problem arises in any session. It happens in Firefox and Thunderbird. Close and restart the program does not help.

  I tried the reset and it was not good. Then I learned that my wife had a similar problem with his ipad I did what I should have done at the beginning, I restarted the router again. Hey presto, problem solved.

  Now, I'm off to eat some humble pie. Thank you, guigs2

• IPhone 6 can connect to WIFI without a sim card?

  6 IPhone can connect to WIFI without a Sim Card?

  knitfly wrote:

  6 IPhone can connect to WIFI without a Sim Card?

  Yes, assuming that the iphone 6 has already been activated.

• Should I have a WiFi card installed?

  I googled this to death and had an email back & forth with HP support and I'm still not the wisest. I hope someone can help with a definitive answer.

  I have a desktop PC HP Pavilion Elite HPE - 170 bought in Australia. The product say that there a "wireless card 802.11 b/g/n Mini PCI-Express half-length" installed.

  When I go to control panel > DeviceManager > network adapters, the present one is a 'Realtek PCIe GBE Family Controller.

  If I try to download/install the driver for the wireless card I get the error message "your system does not meet the minimum requirements for this update. Update has been canceled. (9996).

  I'm not that familiar with that sort of thing, but all this does not seem to suggest that I don't have a WiFi card installed?

  I have to pull the sides the computer turned off and physically take a look? If so, where exactly?

  Hello:

  If you do not see the model of network card wireless list in addition to the wired Realtek card, it could be one of 3 things...

  1. you are correct and either HP forgot to install the card, or the card is incoreect.

  2. If you see a device listed as a network controller listed in the other devices category in Device Manager, then the wireless card is present and the drivers must be installed.

  3. the wireless card is installed but is defective as DOA, or PCIe x 1 adapter that holds the card to the motherboard is loose and has a bad connection.

  Here is the link to the service manual for your PC.  I have not your model, so I have no idea where to find other than to tell you that the wireless card will have a wire antenna plugged on it and it will be mounted in one of the small slots PCIe x 1 on the motherboard via a larger map.

  http://h10032.www1.HP.com/CTG/manual/c01835749.PDF

• Can I sync my calendar with my wife without a credit card

  Can I sync my calendar from the iPad with my wife without a credit card

  You don't need a credit card, a calendar sharing.

  read here: iCloud: overview of calendar sharing

• Data channel read name DAQmx without installed DAQmx

  We have data files, including a header with the names of channels in the DAQmx channel name format.

  Now, we want to send a Labview application to our customer by which they can open these files and just seeing the names of channels in the form of text. Can we make such an application without requiring the customer to install DAQmx. We use Labview 7.1.1 and after installing the application, it asks for nivaiu.dll, nipalu.dll nipalut.dll and so on. Change the simple arrays of strings file header gives compatibility on old data problems.

  Concerning

  Dan Larsson

  Problem solved!

  Control of channel name DAQmx can serve as a binary file read model without installing DAQmx separately. I found a Subvi calling "DAQmx unflatten string. After the removal of this call everythings working.

  Sorry for all you mind!

  / Dan

• is it possible to use the front panel without installing Labview?

  Hallo,

  I have two quick questions:

  1. is it possible to use the façade of a labview software without the need to install Labview itself? I mean something similar to the "power point viewer" that can display Power Point files without installing microsoft office.

  2. in a graphic intensity, how can you change the color?

  Thank you.

  Hello

  What you need to do is

  (1) turn off the interpolation color option

  2) click Add marker, which will add the marker where you want to add

  (3) then right click on the digital value for the marker, you created and you will see the tag, saying: "Color of the mark". Select the color you want.

  In one example, I created values 77 and 23 markers and their red and gray Cap. Hope this helps

  Concerning

• How to install module DSC without installing LabVIEW

  Hello.

  I build exe with the functions of the dsc module (I used an opc server). In my computer, it's work very well. Earlier, I want to create the installer for another computer. I have check all Inc. in the other installers. And build.

  I install my installer in another computer, but I can not create opc client. In services, I find national engine Instrument variable. Its engine description i/o for LabVIEW and LabVIEW DSC. There is prksent ( http://www.ni.com/white-paper/11843/en#189456_by_Category ) that I need to install the DSC module. But when I try to install the dsc module it shows error like "OR LabVIEW 2010 must be installed before you can install Module NI LabVIEW 2010 Dataloging and monitoring control". So, how can I install DSC module in third computer without installing LabVIEW to run exe, where opc client functions.

  Hi, a LabVIEW executable that will run on a target computer requires the engine run LabVIEW version in which the code has been developed more, any other runtime related to the application, in your case: + the Runtime Module of DSC system. Here is an article that can answer your question and the Readme file for installation instructions.

• Run the exe file without installing labview

  I created my labview in exe file. I need to run this exe file on another computer that have no application in labview. It is afficherapres when I try to run it. What should I do without installing labview application in another computer?

  
  

• How to remove kb971029-update without installing it?

  How can I get rid of an available record updated MS without installing it? I do not want to install kb971029.

  Windows XP: Run Windows Update manually, select "Custom."
  Disable the update that you want to not installed and then check the option "don't show this update again.

  J W Stuart: http://www.pagestart.com

• How can I check if a Windows Vista Ultimate key is valid without installing it?

  Is it possible to check if a key of the OS is valid without installing the software?

  I bought Vista Ultimate x 64 off Amazon, they say its brand new and never opened/used, but I want to confirm that before I'm stuck with something that does not work. But I don't have a computer to install it, it is part of a PC planned future upgrade. It could be the end next year e times, I use the software, so if I found out that the seller has lied to this topic's condition I would be $120 and a $ 1000 + stuck accumulation up the river without a paddle...
  So, is there anyway way to check if a key of BONE is valid without installing it?

  Is it possible to check if a key of the OS is valid without installing the software?

  I bought Vista Ultimate x 64 off Amazon, they say its brand new and never opened/used, but I want to confirm that before I'm stuck with something that does not work. But I don't have a computer to install it, it is part of a PC planned future upgrade. It could be the end next year e times, I use the software, so if I found out that the seller has lied to this topic's condition I would be $120 and a $ 1000 + stuck accumulation up the river without a paddle...

  So, is there anyway way to check if a key of BONE is valid without installing it?

  Suggestion only. It may or may not get what you want...

  call the local activation Center, give the number and ask them.
  Good luck
  Licensing Microsoft Volume - Activation Centers

  Stay on the phone until you are connected to a live person.

  Modification of...

  Noel mentioned about it takes time to "go through the system and show as blocked.»

  This is somethingn a value taken into account.

• My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Error 80070020

  windows update

  My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?

  Hello

  read thisL

  Windows Update Error 80070020

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  and also see if this helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Cannot use HP M425dn without installing any client software.

  Anyone know what I have to do to use a HP M425dn without an installation of the client software? We have a Windows 2008 print server configuration and all of our other network printers can be added to a client computer without installing bloatware on their PC. We have other multifunction deployed HP requiring that any installed locally software in order to be able to print. I can send jobs to the printer and they clear the queue but they never get printed. There maybe a setting I'm missing on this printer print server? I have set up in the same way as all our previous printers and I also loaded the specific printer driver (when the HP Universal driver did not work). Any help is greatly appreciated.

  Thank you in advance,

  Brett Woodley

  Try to disable bidirectional Support.  You can find this feature click with the right button on the printer on the server object, then go to its properties.  BDS is on the Ports tab.

  If the specific printer driver does not work on your print server, then you may be missing either x 86 or x 64 support on your object.  I would uninstall and reinstall the printer specific driver and choose to install both versions.  The print server will be smart enough to use one or the other in the meantime on what the customer needs.

  Its also possible that you happen to have a 2nd pritner configured to the same IP.  If this is the case then your print jobs to a printer of different network instead of the desired M425.  DoubleCheck the IP address of your printer and the port it is configured for the server to ensure that it is unique.