Will this work?

Similar Questions

• Is - will this work with Thunderbird V.29 Beta lightning?

  I tried to install Lightning via the function "get module", and he let me. I restarted, and the timetable given. but when I tried to create "new" or "new missions", all the commands to create new tasks/events appear in gray and do not work. Is - will this work with TB V.29 Beta lightning? If Yes, what should I do to get the grayed out 'new tasks/events' orders for work? If it is not fully operational with TB V.20 beta, why it let me install the add-on (who appears intuitive)?

  Versions of Thunderbird are still based on Tb 24 because the current is 24.5.0 as to why version 2.6.4 is served on https://addons.mozilla.org/en-US/thunderbird/addon/lightning/

  Beta-testing of Thunderbird builds that are built to a fine QA, to the appropriate version of lightning as it is for 29,0 Tb 3.1b1.

• Will this work with my HP a1550y?

  Will this work with my HP a1550y?

  If you can find a USB 3.0 card that uses a PCI slot, it should work.  Most of them are cards PCI - e, which does not, because the motherboard doesn't have any PCI-e slots.

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• Will this work on my DV4-1225DX #487330-001 part?

  Hello!

  Will this work on my DV4-1225DX #487330-001 part?

  the part is

  HP Broadcom 802.11agn wireless 4322AGN car

  Thank you

  Hello
  Welcome to the HP Forum! :

  mosheva wrote

  Hello

  Will this work on my DV4-1225DX #487330-001 part?

  the part is

  HP Broadcom 802.11agn wireless 4322AGN car

  Thank you

  Yes, it will be

  It is listed in theguide Service & maintenance as a WLAN module for use in the United States and the Canada...

  Kind regards
  ERICO

• I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  I have

  I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  -What I else I need / have to do?

  Yep, it shud work.

  https://helpx.Adobe.com/Lightroom/help/import-photos-various-sources.html

  Restore a backup catalog

  • Choose file > open catalog.

  • Navigate to the location of your backup catalog file.

  • Select the backup the .lrcat file and click Open.

  • (Optional) Copy the catalog to the location of the original catalogue to replace.

• Will this work with BlackBerry (RIM) phones or stamps?

  I want to use FireFox Sync, but I have a BlackBerry Curve phone (9630). I know the BB OS is Research in Motion Limited RIM aka. I want to know if this software (Sync) will work with my Blackberry.
  Thank you

  Mozilla currently has no intention to make Firefox mobile for BlackBerry phones. Android 2.1 + is still the platform they focus currently on. Is not to say that they will not look to other platforms in the future.

  https://wiki.Mozilla.org/mobile/platforms

• Satellite L750 - if I use the recovery disc HARD Will this work?

  Guy Alrights

  I have a L750 machine that gives me problems at the moment, so I'm going back to Strath, as when I brought brand new... So I wonder if I use HARD drive recovery which will be re install windows and all the drivers and all the pre install software? Or what will be installed?

  Hello

  HARD drive recovery would fix the laptop back to factory settings.
  Recovery of HARD drive installs the image of Toshiba. Toshiba is a package that contains the system Windows, drivers and tools and utilities.

  But I read the other thread you created here, and it seems you did a clean installation
  In this case the HARD disk recovery would not work more :(

• Will this work with Sansa Fuze?

  I just received an FYI Emerson iC2196 CD Clock Radio with docking station for iPod - as a gift.

  I have a Sansa Fuze and this was bought to me because it says no entry to connect iPod and other Mp3 players...

  It seems that the "rocket" will link- but I don't want to break anything!

  OK - I'm writing this, I went to this Web page:

  http://www.target.com/Emerson-iPod-alarm-clock-radio/DP/B0013AG3DY

  I see that it says that it has a line-in for MP3 players - so I guess that means that the dock works only for the iPod - Yes?

  Is there a unit similar to this - CD clock (with or without radio) will be also dockable and play the Sansa Fuze.

  I'm not very technical on this stuff - so any advice is greatly appreciated.

  Thank you!

  Ellie

  NEVER plug a Sansa into an iPod dock connector. They may look alike, but they are wired differently. Chances are good that you will FRY your Sansa. If it says "works with other MP3 players", which means that it works by connecting via the headphone jack of your MP3 player, and not the dock connector.

  There is a Timex clock radio that has a dock from Sansa. Search for "sansa clock radio timex" on Amazon or similar sites and you should find it easily enough.

• I am running winxp sp2 with a processor AMD Athlon XP2800 + 2.08 GHz. Will this work after March 2017?

  The version of Windows XP SP2 is 2002. The PC has 1 GB of ram. I can provide more information if you need. I just need to know if it will work after March 2017. Thank you, Nick

  Come 2017 Firefox 52.0 ESR seems to be your best option to continue to use Firefox for as long as possible. How this will work it is something else.

• The upgrade of the HHD w\o recovery disk... Will this work?

  Can I move the old HHD (c:\) and replace it with a new one, and after that reboot hit the f10 to enter the recovery off the org drive system. ? This will work. I do not have the disk recovery and this idea just poped in any where. Since the org hhd. is partitioned into two disks, IE: C:\ and E:\ (pationtion recovery) if it does not work?    Errrrrrrrrrrrrrr... Which brings me to another question, if this is feasible, how can I go the patition of recovery to the new drive, so I can re - format the old (C;- & E;------) drive. Thanks in advance to all those who post a reply.

  Message edited by DeathHawk152 on 07/16/2009 13:21
  Message edited by DeathHawk152 on 07/16/2009 13:21

  As long as the recovery has completed successfully and the operating system is installed properly, we can work with that.  You must use diskpart or a utility to remove the (unnecessary if you have a support of recovery) recovery partition, and then expand the C partition to fill the rest of the disc.  The recovery media is supposed to replace all out there - so you have to work in the post-recuperation of partitions, not before he does.

  If you are uncomfortable poking around in Diskpart, feel free to- but you may need to re-run the recovery.  Instead, you can use a utility like Partition Magic, but most of those who are paid for.

  Edit: Or delete the recovery partition, reduce the size of C, then create another partition to fill the remainder of the disk space.

  Message edited by Vaika 08/08/2009 15:05

• Laboratory at home - will this work?

  I'm not familiar with ESXi capabilities or it is that I've never experimented with a bare metal hypervisor. I would like to know if what I have in mind will work before investing my time and money into this project

  Objectives - build a ZFS NAS bases / syslog server under a card for my lab at home

  Material

  N40L - Dual-core 1.3 GHz AMD Athlon Microserver HP 2 - NC107i PCI - e Gigabit NIC. I'll add one extra gigabit NIC as well.

  I'll put the max 8GB DDR3 ECC RAM

  For storage, I have to make a minor mod so I can get 5 x HD machine comes with 4 drive bays, so I'll put disks SATA 4 x 2 TB to use as storage RAID-Z. I want to add a shopping cart to drive for 5.25 inch optical drive to install an additional SSD used for these two VMS operating systems. Here is a link for someone who has done the mod - http://paulroberts69.wordpress.com/2012/01/22/installing-a-hdd-in-the-optical-drive-bay-on-an-hp-microserver-n40l/

  Configuration

  In the end, I want to have 2 virtual machines running on this computer.

  VM1 - FreeNas 8

  VM2 - FreeBSD or Linux used as mainly a syslog / web server

  Questions and concerns. Will it be possible?

  I want to start ESXi on internal USB port of motherboards.

  I'll be able to install the operating system of these two virtual machines if I partition the SSD added that I installed in the optical drive Bay?

  The FreeNas VM will be able to configure the RAID-Z among the 4 SATA physical disks?

  Each virtual computer will be assigned it's own physical NIC because they will run on 2 separate behind my pfSense firewall network segments. I don't have any image it will really be a problem if I used it in network bridge.

  If this is not possible, I'll probably install FreeBSD on its own and try to get my setup above to work. I'm not familiar with FreeBSD and I want the nice interface of the FreeNAS GUI to manage my storage and Samba shares, so that is why I want to virtualize.

  Advice or advice is greatly appreciated.

  dafunkphenom wrote:

  I think I'll have to sacrifice the RAM. It looks like buy sticks of 2 x 4 GB RAM ECC would cost me about $450. The box already comes with a 2 GB module, so if I buy another 2 GB directly from HP module I can get it for $70. I doubt I need 8GB to my config anyway.

  Try to search in Kingston or other compatible memory instead of HP original.

  I was looking here (Europe, Switzerland) locally and them found for about $ 40. Kingston is the list this memory as KTH-PL313E / 4G

  $600 tax Inc. for the Microserver.

  $400 for 2 x 3,5 "SATA 2 TB + 1 x 120 GB SSD (I have already 2 x 2 TB drives kicking around and I have a PCI-e Gigabit NIC to an old box)

  $70 for 2 GB ECC memory module

  So probably all said and done between $1000-$1100 taxes. I'm from good old (Ontario) Canada.

  Ah, got a few distant relatives in and around London (Ontario).

  Greetings from nightly from Bern, Switzerland

• Upgraded home network - will this work?

  I'm looking to upgrade my home network devices and have some questions about devices that I did some research and looking to buy.

  WRT 1900 ACS router, switch SE 4008 WRT, of 6500 RE HG AC1200 extender

  If possible I would like the 6500 RE HG as a WAP user, is it possible?  I know there's a 300N WAP browser, but I want to take advantage of the RE 6500 port speeds and speeds of speeds\simultaneous updated wireless band.  My thought is to have the WRT 1900 ACS in a place that will pass to the SE 4008 in another place that feed the RE 6500 Hg in another place like a WAP browser.  I would prefer hard line the RE HG 6500.

  Any help is appreciated!

  Hi, DblDeuce. Linksys RE6500HG will only act as a signal Repeater wireless to your existing Wi - Fi router or Access Point, and it is not a feature must be configured as an access point. However, you can try to look at the LAN-to-LAN or LAN-to-WAN waterfall with the Linksys router on your network configuration of your choice. Check out this link as a guide.

  You can also use a power adapter line for your network configuration. Check out this link.

  Jay-15354

  Linksys technical support

• I would buy Illustrator for iPad 2. Will this work?

  I want to buy it as a gift for my sister in high school. Three questions: How does this process work? CS6 is compatible with the iPad 2? Can I get the price of the student because it use it?

  Thank you!

  P.S. - photoshop would be better?

  macjordeau,

  It is a (very) light version.

  Help draw Illustrator | Adobe Illustrator draw FAQ

  I'm afraid that the answer is the same for Photoshop: heavy real-world applications require more than an iPad.

• Will this work on my laptop?

  I was wondering if someone could help me, I do a multimedia course and would buy Adobe CS6 Production Premium Student and Teacher Edition and install it on my MSI notebook 64-bit FX600MX. It has a processor i5 - 460 M 2.53 ghz, NVIDIA GeForce 310 M graphics, 4 GB of RAM (which I can easily buy a upgrade of) and 170GB of free memory on my drive C. I have an additional 2 TB of memory on an external hard drive.

  I would be really grateful if someone could let me know if that would be enough to run the program, and if there is anything I would need to buy to make it work.

  Thank you, Michael.

  Yes, it works. If you can, to equip the machine with more RAM (which may not be possible with portable computers, of course) because video applications are quite hungry memory, in particular, After Effects, but most of the apps will work fine.

  Mylenium