Upgraded home network - will this work?

Similar Questions

• Purchase a new sealed copy of the upgrade of Windows Vista Edition diskette Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom

  "U.S. / Canada Distribution only" disk for use in the United Kingdom?

  I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.

  Hello

  Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.

  The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.

  Please follow the link menitoned.
  Choice of installation for consumer versions of Windows Vista (32-bit only)
  http://support.Microsoft.com/kb/932616
   
  I hope this helps.

• When I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work.

  Original title: installation problem windows

  I recently had to reinstall windows for my pc that my HARD drive is dead and when I try to activate it with my old key that I got it comes up with an error message saying its an upgrade key and will not work. Ive phone microsoft and they say, I have to buy a basic disk and then upgrade with the disk that has always worked for me? any suggestions?

  License upgrade and the key that's exactly right, used to upgrade a previous version (Vista, XP) for the version shown on the license (7).

  In order to use this key, you need to pre-install your o/s original eligible before moving to 7.

• Is - will this work with Thunderbird V.29 Beta lightning?

  I tried to install Lightning via the function "get module", and he let me. I restarted, and the timetable given. but when I tried to create "new" or "new missions", all the commands to create new tasks/events appear in gray and do not work. Is - will this work with TB V.29 Beta lightning? If Yes, what should I do to get the grayed out 'new tasks/events' orders for work? If it is not fully operational with TB V.20 beta, why it let me install the add-on (who appears intuitive)?

  Versions of Thunderbird are still based on Tb 24 because the current is 24.5.0 as to why version 2.6.4 is served on https://addons.mozilla.org/en-US/thunderbird/addon/lightning/

  Beta-testing of Thunderbird builds that are built to a fine QA, to the appropriate version of lightning as it is for 29,0 Tb 3.1b1.

• Will this work with my HP a1550y?

  Will this work with my HP a1550y?

  If you can find a USB 3.0 card that uses a PCI slot, it should work.  Most of them are cards PCI - e, which does not, because the motherboard doesn't have any PCI-e slots.

• Will this work on my DV4-1225DX #487330-001 part?

  Hello!

  Will this work on my DV4-1225DX #487330-001 part?

  the part is

  HP Broadcom 802.11agn wireless 4322AGN car

  Thank you

  Hello
  Welcome to the HP Forum! :

  mosheva wrote

  Hello

  Will this work on my DV4-1225DX #487330-001 part?

  the part is

  HP Broadcom 802.11agn wireless 4322AGN car

  Thank you

  Yes, it will be

  It is listed in theguide Service & maintenance as a WLAN module for use in the United States and the Canada...

  Kind regards
  ERICO

• I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  I have

  I have been hacked and you will have to reset my PC to factory setting and reinstall everything.  To get my Adobe Lightroom rear 6 where she was re - download the software and then Exchange with my current backup catalog catalog.  Will this work?  -What I else I need / have to do?

  Yep, it shud work.

  https://helpx.Adobe.com/Lightroom/help/import-photos-various-sources.html

  Restore a backup catalog

  • Choose file > open catalog.

  • Navigate to the location of your backup catalog file.

  • Select the backup the .lrcat file and click Open.

  • (Optional) Copy the catalog to the location of the original catalogue to replace.

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• Laboratory at home - will this work?

  I'm not familiar with ESXi capabilities or it is that I've never experimented with a bare metal hypervisor. I would like to know if what I have in mind will work before investing my time and money into this project

  Objectives - build a ZFS NAS bases / syslog server under a card for my lab at home

  Material

  N40L - Dual-core 1.3 GHz AMD Athlon Microserver HP 2 - NC107i PCI - e Gigabit NIC. I'll add one extra gigabit NIC as well.

  I'll put the max 8GB DDR3 ECC RAM

  For storage, I have to make a minor mod so I can get 5 x HD machine comes with 4 drive bays, so I'll put disks SATA 4 x 2 TB to use as storage RAID-Z. I want to add a shopping cart to drive for 5.25 inch optical drive to install an additional SSD used for these two VMS operating systems. Here is a link for someone who has done the mod - http://paulroberts69.wordpress.com/2012/01/22/installing-a-hdd-in-the-optical-drive-bay-on-an-hp-microserver-n40l/

  Configuration

  In the end, I want to have 2 virtual machines running on this computer.

  VM1 - FreeNas 8

  VM2 - FreeBSD or Linux used as mainly a syslog / web server

  Questions and concerns. Will it be possible?

  I want to start ESXi on internal USB port of motherboards.

  I'll be able to install the operating system of these two virtual machines if I partition the SSD added that I installed in the optical drive Bay?

  The FreeNas VM will be able to configure the RAID-Z among the 4 SATA physical disks?

  Each virtual computer will be assigned it's own physical NIC because they will run on 2 separate behind my pfSense firewall network segments. I don't have any image it will really be a problem if I used it in network bridge.

  If this is not possible, I'll probably install FreeBSD on its own and try to get my setup above to work. I'm not familiar with FreeBSD and I want the nice interface of the FreeNAS GUI to manage my storage and Samba shares, so that is why I want to virtualize.

  Advice or advice is greatly appreciated.

  dafunkphenom wrote:

  I think I'll have to sacrifice the RAM. It looks like buy sticks of 2 x 4 GB RAM ECC would cost me about $450. The box already comes with a 2 GB module, so if I buy another 2 GB directly from HP module I can get it for $70. I doubt I need 8GB to my config anyway.

  Try to search in Kingston or other compatible memory instead of HP original.

  I was looking here (Europe, Switzerland) locally and them found for about $ 40. Kingston is the list this memory as KTH-PL313E / 4G

  $600 tax Inc. for the Microserver.

  $400 for 2 x 3,5 "SATA 2 TB + 1 x 120 GB SSD (I have already 2 x 2 TB drives kicking around and I have a PCI-e Gigabit NIC to an old box)

  $70 for 2 GB ECC memory module

  So probably all said and done between $1000-$1100 taxes. I'm from good old (Ontario) Canada.

  Ah, got a few distant relatives in and around London (Ontario).

  Greetings from nightly from Bern, Switzerland

• HP250 G3 Notebook: network will not work after the upgrade to Windows 10

  Hello

  Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

  I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

  Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

  So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

  I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

  If someone hacked into the problem, I would be happy to help.

  Hello

  Thanks for posting your concern, and I would like to try the drivers from the following link---

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

  It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• The upgrade of the HHD w\o recovery disk... Will this work?

  Can I move the old HHD (c:\) and replace it with a new one, and after that reboot hit the f10 to enter the recovery off the org drive system. ? This will work. I do not have the disk recovery and this idea just poped in any where. Since the org hhd. is partitioned into two disks, IE: C:\ and E:\ (pationtion recovery) if it does not work?    Errrrrrrrrrrrrrr... Which brings me to another question, if this is feasible, how can I go the patition of recovery to the new drive, so I can re - format the old (C;- & E;------) drive. Thanks in advance to all those who post a reply.

  Message edited by DeathHawk152 on 07/16/2009 13:21
  Message edited by DeathHawk152 on 07/16/2009 13:21

  As long as the recovery has completed successfully and the operating system is installed properly, we can work with that.  You must use diskpart or a utility to remove the (unnecessary if you have a support of recovery) recovery partition, and then expand the C partition to fill the rest of the disc.  The recovery media is supposed to replace all out there - so you have to work in the post-recuperation of partitions, not before he does.

  If you are uncomfortable poking around in Diskpart, feel free to- but you may need to re-run the recovery.  Instead, you can use a utility like Partition Magic, but most of those who are paid for.

  Edit: Or delete the recovery partition, reduce the size of C, then create another partition to fill the remainder of the disk space.

  Message edited by Vaika 08/08/2009 15:05

• Will this work with BlackBerry (RIM) phones or stamps?

  I want to use FireFox Sync, but I have a BlackBerry Curve phone (9630). I know the BB OS is Research in Motion Limited RIM aka. I want to know if this software (Sync) will work with my Blackberry.
  Thank you

  Mozilla currently has no intention to make Firefox mobile for BlackBerry phones. Android 2.1 + is still the platform they focus currently on. Is not to say that they will not look to other platforms in the future.

  https://wiki.Mozilla.org/mobile/platforms

• Satellite L750 - if I use the recovery disc HARD Will this work?

  Guy Alrights

  I have a L750 machine that gives me problems at the moment, so I'm going back to Strath, as when I brought brand new... So I wonder if I use HARD drive recovery which will be re install windows and all the drivers and all the pre install software? Or what will be installed?

  Hello

  HARD drive recovery would fix the laptop back to factory settings.
  Recovery of HARD drive installs the image of Toshiba. Toshiba is a package that contains the system Windows, drivers and tools and utilities.

  But I read the other thread you created here, and it seems you did a clean installation
  In this case the HARD disk recovery would not work more :(

• My home network does not work. I can access the internet fine however.

  My net home doesn´t work for a computer. I use this computer on the Internet with no problems at all.  I can't connect to other computers at home. I tried to launch the REPAIR for the connection and I got an error.  It was something about "Clearing NetBT"
  Is there someone who knows wat do I do?

  original title: clearing NetBT in Windows XP

  This problem has occored with me just on wireless computers with.

  Try to uninstall the drivers for the wireless card and reinstall.

  Kind regards

• Will this work with Sansa Fuze?

  I just received an FYI Emerson iC2196 CD Clock Radio with docking station for iPod - as a gift.

  I have a Sansa Fuze and this was bought to me because it says no entry to connect iPod and other Mp3 players...

  It seems that the "rocket" will link- but I don't want to break anything!

  OK - I'm writing this, I went to this Web page:

  http://www.target.com/Emerson-iPod-alarm-clock-radio/DP/B0013AG3DY

  I see that it says that it has a line-in for MP3 players - so I guess that means that the dock works only for the iPod - Yes?

  Is there a unit similar to this - CD clock (with or without radio) will be also dockable and play the Sansa Fuze.

  I'm not very technical on this stuff - so any advice is greatly appreciated.

  Thank you!

  Ellie

  NEVER plug a Sansa into an iPod dock connector. They may look alike, but they are wired differently. Chances are good that you will FRY your Sansa. If it says "works with other MP3 players", which means that it works by connecting via the headphone jack of your MP3 player, and not the dock connector.

  There is a Timex clock radio that has a dock from Sansa. Search for "sansa clock radio timex" on Amazon or similar sites and you should find it easily enough.