WIN 64: The application is valid but was designed for a different system (32-bit).

Similar Questions

• After repeated close features, I still get the VISA error "the resource is valid, but the VISA cannot access to this.

  I'm currently building an application on a device cDAQ, which involves the use of a scale. The scale uses the RS232 communication, but is connected to an RS-232 adapter / USB and plugged into one of the USB ports on the cDAQ (COM 10). I am contacting the scale using the basic functions of VISA: VISA Open > VISA Read > clear VISA > VISA family. I created an application using the scale that worked correctly, but now whenever I try to access the scale - whether through MAX, a VI or a version rebuilt in the same application - I get the error "the resource is valid, but VISA can not currently access."

  The scale has three options for data transmission: "No. Data Output" "data output continues" and "Normal output when you press the Print button. I have it set to "data output continues, I don't know if this information is useful.

  The c-data acquisition is a NEITHER cDAQ-9138

  I have tried several things to get rid of this error:

  -Restart the cDAQ

  -Functions "Close VISA" running repeatedly on COM Port

  -Completely unplugged and powered off the coast of the scale

  -Connect the scale on a different COM Port

  -Repeatedly in the course of execution 'unblock port' VISA functions on COM Port, as a colleague has suggested that perhaps the problem

  None of them have worked.

  Does anyone have any suggestions of reliably, get rid of this error?

  I have attached a vi showing how I try to read from the device. Any help would be appreciated.

  A colleague of the Department of electrical engineering of the company has solved the problem. The scale has a material defect that will constantly try to communicate with a VISA session, even if the session is closed for a long time on the computer. Essentially, the VISA session on the scale does not, stop even if she ends up on the computer. He says it's a mistake he has not seen in 3-4 years.

  How to fix the error is to unplug everything from the balance and leave it unplugged for at least 30 seconds to make sure that all of his equipment off completely. When you plug the scale, it will be sensitive to a new VISA session. I tried it and the balance works again through VISA.

• Report Generation Toolkit, production of the 2147417842 error, "The application called an interface that was marshalled for a different thread."

  Hello world

  I have an application that stores data in an Excel worksheet by using the report generation tool.  My VI have worked well in the past using Excel XP, but since I have upgraded to Excel 2007, I get COM errors like this:

  "2147417842 error occurred while the application called an interface that was marshalled for a different thread. in Excel_Insert_Text.vi', this is the exact wording, even with the odd punctuation and capitalization.

  The first occurrence of the error is not determined.  Sometimes, to the record 10 sessions, involving a new .xls file, may occur before this error.  Once this error occurs, I must leave LabVIEW to solve.  If I try to do something with Excel, I still get this error, even if sometimes it comes out different source Excel_Open.VI is another.

  These screw logging worked fine until upgrading to Excel 2007.  I checked and I have been using a very old version of the report generation tool, v1.0.1.  I read the documentation and had a big sigh of relief when I realized that I needed to upgrade to v1.1.2 for Excel 2007 help.  However, even after the upgrade, I still get the same errors.  I'm using LabVIEW 8.0.1 and I also build these screws in an application.   The error occurs in the application built both in the IDE of LabVIEW.  Anyone out there have any idea what I can do to fix this?  I google a bit and discovered it is a COM error, but I can't find any reference to the report generation tool specifically.

  Thank you

  Phil

  I think that suits him!

  Here's what I did: I left privileged execution environment level upper VI as "as the appellant.  I tried the "user interface" configuration, but it seemed to slow down considerably the program.

  Then, I found each sub - VI, calling the report generation tool and define the environment for running favorite "user interface".  All the errors went away, and the program is much happier now.

  Big assumption on what a Christian, thank you!

• I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid.  the adobe support team indicates the number is valid, but that they cannot help me

  I just downloaded photoshop elements 7.0 to a new box, and he said that my serial number is not valid. the adobe support team indicates the number is valid, but that they cannot help me

  who cancel. Ugh... it was one of the other programs in the bundle of bamboo that was having a problem.  Thanks again for responding, I think I'm now covered for photoshop elements.

• How can I save a document in pdf format pdf.p7m? I have digitally signed by Aruba I signed and the signature is valid, but not in pdf format, I contacted Aruba, I sent my card and regular and correct. Who can help me?

  How can I Save a document in PDF format PDF.p7m ?
  I digitally signed Aruba
  J’ai signed and the signature is valid, but not in pdf format pdf.p7m
  I contacted Aruba, I sent my card and regular and correct.
  Which peut help to me?

  Not possible with Adobe Acrobat.

  Open File Extension P7M

• Problem with website security cerificates. Said the security certificate presented by this website was issued for a different website address.

  Problem began the week last with Verizon's Yahoo email. I can't access it. I get the message on the certificate.  Said the security certificate presented by this website was issued for a different website address.  can hnts in and out of yahoo, but can not get by e-mail. I have Windows vista 32-bit home. Have tried several things offered by yahoo... Delete history, cookies, defragment the drive hard, etc. Then they said need to ask Verizon. Community sitting there, no response. I had a help line, but what they had me try did not work. Could not do the download help remotely, I tried Java plugin download, has got an error 12031, and a Microsoft fix it but none of it worked. Could not load. Then they said it was having problems with Microsoft windows problems. Error files, corrupted files and certificate & register...  I did a few other things too but do not know if someone can help me... Not even if I am in the right place.  I really hope that someone can help you.

  Hi Patsabo,

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I downloaded and installed creative cloud with no problems. From the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen). This is why I can't select the application to be updated. Thanks for your help

  I have download and install creative cloud with no problems. In the window of creative cloud cannot display the APPS page (while other 'Home', 'Community' can be seen. This is why I can't select the application to be updated. Thanks for your help

  Please refer to the threads below where the issue has been addressed:

  Re: desktop is not displayed Panel apps? PC

  Missing Creative Cloud Desktop applications tab

• BlackBerry Z10 Print to Go has stopped working after the installation of KB2992611 on Windows 7 for x 64 system

  A large number of reviews and safety notice associated Microsoft updates showed in place on November 11, 2014 that were installed. Subsequently several failures that happened after the reboot (i.e. IE would freeze at start-up, Print to Go

  the stoppage of work - has indicated that there is no connection to the Internet, the PrintToGoLog.txt had much more detail).

  Other users of similar problem after a reported BB playbook KB2992611 updates has been applied,

  After KB2992611 (a security update for Windows 7 for x 64 system) has been uninstalled, Print To Go was working properly. Unfortunately, it is still not. Firefox is OK.

  Thanks for the info, this will help others with the same question.

  That KB was for all windows systems, but was mainly for Win Vista business.

  You can reset IE in Internet properties, program tab, or download another or do a system restore to November 10.

  Firefox is not affected because it is not incorporated in the system as IE.

• If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  There are a number of variables here.  First of all if you go to the 64 bit version of Windows 7, you will not be able to run 16-bit programs in normal mode.  However, if you go to the professional version of Windows 7, you can install the free XP Mode and run 16-bit programs under that.  XP mode runs as a task under Windows 7.  It works fine as long as you can live with the limited graphics.  I have 900 x 600 16-bit color at home.

  If you go with the 32-bit version of Windows, you might be able to run your 16-bit program in compatibility mode.  It depends of course is the compatibility with Windows 7.  Some work and some aren't.  The limitation with the 32-bit version is that it supports more than 4 GB of RAM.

  Good luck.

• I can see the printer in the application (Photosmart C7280) but the "print" key seems to be gray

  I use the HP homeandbiz app on my iPad, the app recognizes my HP 7200 printer and seems to let me select it, but the "print" key does not work. There is a small circle, red next to the printer in the application - this important?

  Hi DaveTlp,

  It seems that the printer has been associated previously but is not currently available. Make sure that the printer is turned on, your ink levels are ok and make sure that both devices are on the same wireless network. If the problem persists, I would like to power cycle both devices and see if that helps.

• How can I reinstall Acrobat if Application Manager indicates that the application is updated, but is absent?

  I uninstalled Acrobat 11 using the uninstall program, and now I can't reinstall because the Application handler specifies that the application is actually updated. The application went from my hard drive and all files of application support disappeared as well. How is - this application manager is considering the application is still installed? Is there a way I can download without the application manager?

  Hello

  I was able to run this: http://www.adobe.com/support/contact/cscleanertool.html

  Needed to ensure that 'ALL' has been selected in the menu drop-down to make sure that Acrobat has shown in the list. Removed and managed to install.

• Additional applications of blackBerry Smartphones No. designed for your device found

  Hello

  I get the, msg "no additional applications designed for your device not found" when trying to install new software via my Desktop Manager. I read a thread that says I have to install BlackBerry software for the current device.   It seemed to work for the individual with the question.

  The post office is: http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...

  Well, I would like to download the software for mine, but my carrier/provider don't showup on the BlackBerry site.  My carrier is AlaskaDigitel.  Is there some generic download that I could use?  My Office Manager can show what software is installed on my device, like Google Maps, etc.. He simply refuses to install the software. The things I installed were facilities OTA.

  Here is a little info that can help you to understand what I see:

  I have a BB 8130 Pearl
  v4.3.0.127 (Platform 3.1.0.73)

  I think that there is something wrong & I just don't recognize the simple fix for it. Could someone help me?.
  I opened the Desktop Manager, click on the Office Manager & watch the
  Tab 'general '.
  BB Desktop manager: 4.3.0.15

  "Components" tab
  BBDevice Manager: 4.3.0.7
  BBDevMgr: 4.0.0.1
  RIM USB driver: 4.0.0.2
  RIM USB Serial Driver: 2.1.0.4
  Application loader: 4.3.0.13
  RIMProgram: 1.0.1.35

  There is nothing in the tab "Device Software"<=Is this="" the="">

  Everything "Looks" right to me, but I am very, very new to this.
  Thank you
  ~ Roystreet

  Yes, that's the problem.  You need the OS installed on the computer (so it will show in the tab of the device software) in order to get rid of this error.  You can use any OS for your device model, regardless of the carrier.

  Use the link below to find a carrier CDMA which offers the 8130 and has a download for 4.3.0.127.  Download it, install it on your computer.  Then go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."  This file prevents the installation of your device carrier operating systems.  Deleting the file will allow DM recognize as valid for your device.  It does nothing else, so it is safe to delete.  Once you have deleted the vendor.xml file reconnect the device to the PC and launch the Desktop Manager/Application Loader.  You should be good to go.

  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• adjust the front panel of the screen size and re - position automatically objects on different systems

  Hello, I designed a vi which contains 5 led is placed at the centre of the façade that occupies the entire screen and 4 corners. However, this vi should be used on different systems, with different screen sizes. But on each screen, I'll need the size of the cover = size of the screen and the light to be placed in centres and corner of this new size of the screen automatically without manual operations and positioning bieng made every time. The option of resizing will perform this task completely or I have to go to some other techniques?

  As far as I know, what you want is not easy to do but it's doable but you have to do it programmatically (no adjustment of Labview). Here is an example for only 2 LEDs, but I guess you'll be able to make it work for your other LEDs.

  This VI maximizes the front and then positioned the 2 LEDs in the Center and top right on the race. LEDs are positioned according to their own corners left, not on the basis of their centers.

  

• choice of the model of design for data acquisition system

  Hi all

  I have a problem on the selection of the model design / architecture for a data acquisition system.

  Here are the details of the desired system:

  There are data acquisition hardware and I need to use by looking at the settings on the user interface.

  the period of data acquisition, channel list to analyze must be selected on the user interface. In addition, there are many interactions with the user interface. for example if the user selects a channel to add scanlist, I need to activate and make it visible to others on the user interface.

  When the user completes the channel selection, then he will press the button to start the data acquisition. Then, I also need to show the values scanned on a graph in real time and save them in a txt file.

  I know that I can not use producer consumer model here. because the data acquisition loop should wait for the settings to scan channels. and it works on a given period by the user. If the loop of user interface makes higher then loop (loop data acquisition) of consumption. This means that queue will be bigger, larger. If I use notifier this will be some data loss comes from the user interface.

  y at - it an idea about it? is there any model of design suitable for this case?

  Thanks in advance

  Best regards

  Veli BAYAR

  Software for embedded systems and hardware engineer

  Veli,

  I recommend the model producer/consumer with some modifications.

  You might need three loops.  I can't tell for sure from your brief description.

  The loop of the User Interface responds to the user for configuration entries and start/stop of acquisition.  The parameters and commands are passed to the Data Acquisition loop via a queue. In this loop is a machine States that slowed, Configuration, Acquisition and stop States (and perhaps others). The data is sent to the processing loop through another line. The processing loop performs any data processing, displays the data from the user, and records to file. A registrant can be used to send the Stop command or stop the loop of the UI for other loops.  If the amount of treatment is minimal and the time of writing files are not too long, the functions of processing loop might be able to happen in the case of the UI loop timeout structure of the event.  This makes things a little easier, but is not as flexible when changes need to be made.

  I'm not sure that there is a type of design for this exact configuration, but it is essentially a combination of the models Design of producer/consumer (data) and producer/consumer (events).

  Lynn