Win 7 and 2 records of 2 partitions apps

Similar Questions

• I have win 7 and I can't update win 10 due to the too small system partition. I have only 2.98 gb

  I have win 7 and could ' t update win 10 due to the too small system partition

  The above is a statement. Do you have a question?

• XP-Mode or dual Partition (win - 7 and Win - XP)?

  I have a new and powerful, portable-Windows 7 Ultimate.   Most of my 'work horse' programs require Windows XP.   In the long term, is it better to use "XP" Mode or install double partitions (Windows 7 and Windows XP)?  HP tells me that the PC can easily manage partitions and they think that double partitions would be better.
  Can you provide me with an answer, and 'why' it is best?

  As long as the programs are not games, XP mode would probably be okay and cheaper too because you don't need to purchase a full retail XP edition.

  Another point to keep in mind is that your new laptop can not have any support drivers for a full installation of XP in its own partition. Check the support site of the HP driver for the existence of the XP drivers.

• Dual Boot Win XP and Win 98 / Me

  I have an Equium A60-692, I want to dual boot it with the existing Win XP and Win 98 (pref) or Winme. I succumbed to the Win 98 or Win Me loading on the hard drive. Even during startup with a completely blank disc. (formatted). The installation fails at some point when I think it's either looking at PNP or pieces PCMCIA devices. Someone at - it win 98 on a laptop toshiba modern. What I missed. Someone help please!

  Hello

  The first important difference is that partitions are most recent an old FAT32 and NTFS HARD disk. Please check this page of http://www.ntfs.com/ for more information.

  Good bye

• No key for don't win 7 and the need to return to original vista which i have a key.

  Original title: product key and vista installation.

  Hi I am not the wisest to my problem that I have read and tried many answers to my problem. I have 22 days to activate my windows 7. However, I don't have the key but I have the key for the original installation that has vista. I don't have vista reinstall disk therefore aimed to download Vista from a microsoft official, but the link does not work. I cannot afford to buy a new copy of vista and I was told that Microsoft can help you with this. I need a solution and an easy breakdown on how or what I should do to get installed it again. I'm at risk of losing my laptop because of this activation problem. So to sum up, I have no key for win 7 and need to return to original vista which i have a key. Now having need for instructions and vista software how to install etc... Thanks if you can help.

  Hello

  Your problem is you installed Windows 7, but do not have the product key to activate, if you want to go back to the original OS that came with your machine, namely Vista.

  _____________________________________________

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  Installation of Windows 7 was able to destroy this method:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I install win 8 and win 7 on the same machine

  I am running Win 7 Ultimate and want to install Win 8 Pro as an additional operating system without remove Win 7 and then have the ability to boot to one of the OS.

  One possibility would be to run Windows 8 as VM on Windows 7, although it may not give the best experience.

  Otherwise you're going to need another partition or another drive to install Windows 8 on. If you're talking about a laptop, then additional disks options are few but for a desktop computer, it is by far the best option.

  Provide the original disc is not full shrink the current C: partition to create the ability for Windows 8 must be installed on the empty space is not so difficult, that's exactly what I did with my Acer Touch PC to allow me to test Windows 8 and it worked perfectly (no space for another drive). I could even point Windows 8 at the partition of Windows 7 to search for drivers for the unidentified material, and all have been resolved.

• I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  You don't want to buy win8 until you have verified first this portable machine provides win8 drivers, or you ran the tool to advise win8 update.

  PS You are sure that your version of win7 is bad, or are you just a «can be victum msg»

  Your laptop has a restore partition hidden, from where you can restore you to factory State?

• partitions for Exchange works only (no movement records to all partitions)

  The use of partitions of exchange to move data from a table that is not partitioned to partitioned table does not move the records of all partitions...

  for example

  Not partitioned table

  create table tab1 as select object_id from user_objects;

  partitioned table
  create table parttab (OBJECT_ID number) partition by hash (object_id)
  (partition p1, partition p2, p3, p4 partition partition);
  
  Exchange
  ALTER table parttab Exchange partition p1 with table tab1 without validation;
  
  ALTER table parttab Exchange partition p2 with table tab1 without validation;
  
  ALTER table parttab Exchange partition p3 with table tab1 without validation;
  
  ALTER table parttab Exchange partition p4 with table tab1 without validation;
  
  Select count (1), "P1" as partnam parttab partition (p1)
  Union
  Select count (1), "P2" as partnam parttab partition (p2)
  Union
  Select count (1), 'P3' as partnam parttab partition (p3)
  Union
  Select count (1), 'P4' as partnam parttab partition (p4)
  order of partnam;

  only P1 is to have the records, other partitions are zero records

  Please suggest

  Thank you

  S

  Thank you Kiss. but now the table will have double right recordings... ?

  y at - it an otherway?

  Another way to do what? Load this HASH partitioned table? Yes - simply INSERT in it as PaulHorth suggested.

  What you're trying to load a table partitioned hash isn't sensible. These tables use a HASH algorithm to fill several partitions so that each partition will have the same number of lines.

  An EXCHANGE puts ALL the data in a partition; This is just an update of data dictionary.

  or I try with just 1 hash partition at the start then swap the records and split... but the split hash partition is possible? NO.

  No - you can't divide a HASH partition. See the VLDB and partitioning Doc

  http://docs.Oracle.com/CD/B28359_01/server.111/b32024/part_admin.htm#g1010774

  Also the use of "without validation" will cause problems for your first example because partition P1 will be given which actually belongs to P2, P3 and P4 partitions.

  So if you now create a local unique index on this table, you will be able to use this index to find any data belonging to these other three partitions because Oracle will use on the index partition pruning to determine which partitions to check. And the index for other partitions partitions will have all the data in them all the data being located on the P1 partition.

  Try this code example to see what I mean:

  drop table myTab cascade constraints;

  drop table myTabPar cascade constraints;

  drop table myTabPar1 cascade constraints;

  create the table myTab (myId number);

  create the table MyTabPar (myId number) partition by hash (myId)
  (partition p1, partition p2);

  create the table MyTabPar1 (myId number) partition by hash (myId)
  (partition p1, partition p2);

  create an index on mytabpar (myId) single mytabpar_ndx local

  create an index only mytabpar1_ndx on local mytabpar1 (myId)

  insert into values myTab (1);

  insert into myTab values (2);

  insert into mytabpar1 select * from mytab

  ALTER table mytabpar Exchange partition p1 with table mytab without validation

  commit;

  Select * from mytabpar;

  MYID

  1

  2

  Select * partition mytabpar (p1)

  MYID

  1

  2

  Select * partition mytabpar (p2)

  -No data

  Select * from mytabpar where myid = 2

  MYID

  2

  Select * from mytabpar where myid = 1

  -No data

  PLAN_TABLE_OUTPUT

  SQL_ID, 1s1gpvm7pf05k, number of children 0

  -------------------------------------

  Select * from mytabpar where myid = 1

  Hash value of plan: 1899509776

  -------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Pstart. Pstop |

  -------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |              |       |       |     1 (100) |       |       |

  |   1.  UNIQUE HASH PARTITION |              |     1.    13.     0 (0) |     2.     2.

  |*  2 |   INDEX UNIQUE SCAN | MYTABPAR_NDX |     1.    13.     0 (0) |     2.     2.

  -------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  2 - access ("MYID" = 1)

  The plan shows Oracle uses the unique index to find the data from a hash of the value ('myid = 1') indicates that only the partition of the local index for partition 2 may possibly have the necessary data.

  Of course, it is wrong because the clause "without validation" has been used to put all the data in the first partition.

  The typical use case if HASH is involved is when there are secondary hash partitions. Then, you can create a table 'temp' that is partitioned by hash and switch with the partition - you exchange them with the subparts of hash. This is the ONLY use case where EXCHANGE to operate between two partitioned tables: a table is partitioned and sous-partitionnée and the 'temp' table is partitioned but its partitioning scheme is identical to the "sub" mΘthodes of recommandΘes of the other table partitioning.

• I have two computers on the same router. One, on Xp and Eudora normally receives. The second on WIN-7 and Thunderbird receives the same messages in code -?

  I have two computers-
  On WinXp and Eudora receives emails in normal text.
  Sometimes, the other on Win-7 and Thunderbird receives the same message in code.
  Normally, this same message is received on the other computer.
  What have I've set wrong
  GerryMcDonald

  Start with view-> Message-> HTML Original body

• Why are some of my black and blue records?

  On the left of Thunderbird is a list of user accounts and of records. Some of them are blue and some are black. Why is this? What does take to activate an account or a folder to the dark blue?

  Blue indicates a new unread message. Once you open the folder to view the headers, it changes to "BOLD" black before I read the messages.

• Sync was working, but had to re-install Win 7 and have lost the key to the synchronization

  I got Sync works well between my Win 7 PC and an android device. But I had to reinstall Win 7 and am unable to set up Sync on the PC it gives me a code to enter on Android device. I stopped the service on an Android device (to try to set it all up again), but now both devices give me codes to enter on the other device. To make matters worse, although I tried to retrieve information from the PC prior to the relocation, I lost my key of Firefox Sync. Help, please.

  P.S. all this can be reset your end, so I can start over again

  If you still have the key of the synchronization on this device and then use this extension.

  • See the sync key: http://limpet.net/key/

• no boot device during the start of mini mac and bootcamp after adding the partition

  My mac mini is running el capitan and after I added a partition I don't got no boot device but can start at el capitan after pressing option. However, I can't start boot camp. Thank you!

  Last login: kills Mar 31 17:33:01 on ttys000

  independenceadec1s-Mac-mini: ~ the independenceadec1 list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Untitled Apple_HFS 1 GB 172.5 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 82.7 GB disk0s4

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 31.9 disk1

  1: disk1s1 Windows_FAT_32 NO NAME 31.9 GB

  independenceadec1s-Mac-mini: ~ independenceadec1$

  By adding a third partition you have damaged the boot loader. If you use Boot Camp to run Windows, so you cannot add a third partition. To set things straight, you will need to repartition the disk to a single partition and try again. A $20 alternative that might work for troubleshoot you is Paragon CampTune X.

• iOS 9.2 cannot download the CNN app and voice recorder on iPhone 5 s

  I have a 5 iPhone with iOS 9.2 on it from now. Apple customer service had updated me to iOS to iOS 9.2 9.1 thought, it would solve this problem, but it didn't. I tried all day download the CNN app and voice recorder app on my phone. It will be partially download and then say ' cannot download this article, please try again later ' with the option 'Retry' or 'done '. No matter what are the options I've done, I still turn in this with CNN and recorder of the word and I installed the new iOS 9.2 software and reset the settings. And by doing all this, I managed to download a set of cards from the APP store and software updates on the handle of my time and my iMessage.

  Apple had no idea why this happens, do any of you?

  Given that I was able to download other software and updates, my account is ok, my password is ok until it could it be?

  Everyone knows about this problem?

  Thank you

  Martha

  The applications in question may be being replaced on the server. I have just wait and try again later. I don't know what dictaphone app you are talking about.

• How to acquire with NiScope at different sampling frequencies and lengths Records?

  I need to acquire the data of 2 channels of the NI PXI-5114 map two different sampling frequencies high, at the same time. Also, I put 2 different record length. Is this possible?

  I understand that 'Vertical' settings can be configured for individual chains because the function 'Vertical niScope Configure' has 'channels of entry with which we can assign the desired channel. But for horizontal settings such as "min sampling rate" and the record min length, I could not find such an option to specify the channel. Would it not common to both channels?

  I hope that the device is capable of simultaneous sampling and therefore channels can be configured individually to different sampling rate.

  Hi AJ_CS,

  Why do you have to be distinct from sampling frequencies on channels separated from the digitizer even?  What different sampling rate do you want?

  But for horizontal settings such as "min sampling rate" and the record min length, I could not find such an option to specify the channel. Would it not common to both channels?

  You do not have an option to configure the settings of hoirizontal on a channel by channel basis because this concept does not exist in the traditional sense of the use of a scope.  Compatible with the concept of IVI, an oscilloscope traditional benchtop will have only a button or a set of buttons for setting the parameters of synchronization of the unit.  There is therefore no horizontal configuration to separate channels on the scanners NOR.

  I hope that the device is capable of simultaneous sampling and therefore channels can be configured individually to different sampling rate.

  Similar to a traditional benchtop oscilloscpe, the device is capable of simultaneous sampling.  But as mentioned above, the channels can not be configured for different sampling frequencies high.

  However, you can ignore data that you think is not relevant.  For example, if you assign 100MS/s CH0 and CH1 to 50 MS/s, then you throw all other samples.

  Alternatively, you can use separate scanners (a channel on each digitizer) and configure them to taste at different rates.  You can set frequencies of sampling on scanners NOR separated and even synchronize them with TClk.

  -Andrew

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul