Win 7 cannot find the Premier Pro file associations

Similar Questions

• Cannot find the operating system files

  Cannot find the operating system files after system, Windows 7 error Ox490 HP Pavilion e9150t recovery

  Thank you very much I'll check on that.  Ended up doing a restore of the original.  Painful but successful.

• HP photosmart c4580 program cannot find the installation 7zs7e9a file

  HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

  cancellation of the attempt to install the software will run without problem.

  tried to extract files without 7zs7e9a file in the temp directory

  all solutions?

  I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

  PS

  OS vista Home premium 64-bit

  Thank you for your quick response

  concerning

  clhxo

• While booting XP machine, get error "the application cannot continue because it cannot find the uncdms.dll file.

  just after the start of the desktop windows appears and then I get the error message "the application cannot continue because it cannot find the uncdms.dll file" I searched using windows search, nothing helps.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  By default, the uncdms.dll file is located in the folder C:\Windows\System32. The file is more common in 143 872 bytes.

  Follow the methods below

  Method 1:

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Cannot find the config.xml file

  Hi all

  I searched the forum and google my problem with no luck.  I hope someone here can help me.

  On my Windows XP VM, I try to use Packager WebWorks to compile a file to archive.  Whenever I do, I get "archive invalid - cannot find the file config.xml.  Of course, my zip file has a config.xml file.

  While trying to fix it myself, I downloaded the sketchpadStandard.zip of the sample and could only compile without error.  I extracted the file and re-compressed it and got the error "cannot find the config.xml file.  I used the utility of windows XP, I downloaded winzip and used this utility, I used my mac to compress the file.  Whenever * I * do, I get the error.

  Obviously, package manager works, and I'm in the right directory that I'm able to compile the provided sample Archives, but why the hell can not compile the VERY SAME FILES I checked myself?

  Any thoughts much appreciated.

  After several hours of experimentation, I finally load the mac version of the SDK directly on my mac, rather than the version of windows on my virtual Windows machine.  I did the fix here would solve the same problem on a mac and it worked.

• Invalid application - cannot find the config.xml file archive

  I'm new to webworks development... I created a sample config.xml and index.html in the folder Helloworld and made a Zip file...

  Then using ripple I packed up the app and the. Cod files are generated correctly...

  But I was not able to pack and sign using ripple, if I had the signature keys added to the bin folder of the SDK correctly...

  So I tried bbwp command line argument to achieve the same... But it has ended up with the error "Invalid application archive - cannot find the file config.xml.

  What is the problem that I do with the archieve file?

  How to use eclipse for development for the Webworks 2.3.1.5 sdk?

  My guess is that you have a HelloWorld inside your zip file and the file config.xml and index.html are inside this folder. The config.xml file must be in the root and must reference the index.html file, wherever it is in the zip directory structure.

• Cannot find the locale data files. Please reinstall

  I had a problem with Google Chrome, so I uninstalled via the control panel. I then reinstalled and I have this problem. I always present in my programs in the watched folder, but when I select to demolished, he said ' wait until the current program has finished install or changing.» I have no other program install or change. If I try to open Google, anywhere Progams, taskbar, all programs or directly from the .exe LocalApps it gives me the "could not find the locale data files. Please reinstall.

  I found the answer to my question. It seems that you can build processes, I don't understand why. For example I had a problem with my windows Explorer crashing. I disabled all the startup process of msconfig.

  In my view, there must be something in there that closes a completed process.
  Then I had, unknown to me, when I posted this problem, six or seven cases Google chrome showing the the Task Manager process tab. When I quit all instances of Google, I was able to finish the removal process and re - install Google Chrome.
  I just checked right now and I have six Google shown 3 rundll32.exe and two taskeng.exe bodies. I've never seen no more than one instance of anything in this tab before today.
  Disabling all startup stuff does not solve my problem to explore some way so I'll allow them once again.
  Thank you for helping me and I hope that someone can get useful information from my travels.

• I upgraded to a new computer with Yosemite, after have migrated my settings on, Dreamweaver CS 5.5 will not launch. It says it cannot find the menus.xml file, then the problem is getting worse.

  I upgraded to a new computer with Yosemite, after have migrated my settings on. Adobe CS5.5 works very well except Dreamweaver CS 5.5, it says it cannot locate the menus.xml file and cannot rebuild from a backup. He suggested resettlement.

  But when I try to reinstall, I get an error that says "Installer failed to initialize. Please download adobe support advisor to detect the problem.

  Who produces the net problem of it being abandoned, and that brought me here. Help!

  This is a duplicate thread.

  DW CS5.5 and Yosemite [subject edited by Moderator]

  Ultimately, the problem has been resolved by running the cleanup CC tools then by reinstalling the software.

  Nancy O.

• Cannot find the Illustrator preferences file

  It's my first time on a forum - please bear with me. I recently moved to a new role with any new mac OS 10.9.1. I have not defined it manipulated our IT dept upward. I can't find the illustrator preferences file to reset my default preferences. I tried the rest of the string of records that are provided in the tutorial that I am following in the Adobe Classroom in A Book. Don't forget that I am far from the world of mac for 6 years. Do not assume that I know nothing.

  http://www.WikiHow.com/Show-hidden-files-and-folders-on-Mac-OS-X

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• Cannot find the overall messages file - db.sqlite

  Hi, volunteers! Thank you for being here.

  The search function of Thunderbird has stopped working. He cannot find all - regardless of the query returned no results.

  I understand that I need to rebuild the global database to correct this and have read the instructions here:

  https://support.Mozilla.org/en-us/KB/rebuilding-global-database

  He tells me to delete my profile from TB global-messages - db.sqlite. Connects me to another page on how to find this profile. I followed these instructions:

  "How to find your profile.

     Click on the menu button or menu bar.
     From the Help menu, click Troubleshooting Information.
     In the Application Basics section, Profile Folder, click on Show in Finder.
     The Mac Finder window will show the name of the profile as well as the path to it."
  

  The finder window shows me this file: zfrnv9to.default - 1445806062498. Nothing inside it looks like the file I'm supposed to delete, which is global-messages - db.sqlite.

  I also used the Mac projector for a search on "global-messages - db.sqlite. He cannot find anything like this on my Mac Air (which is running El Capitan). It is usually pretty reliable to dig up files, but - no luck.

  What should I do now?

  Zenos, thank you! I solved this on my own last night.

  In case it helps the next person: I re-read the page of Mozilla to find the file.

  So, rather than looking in the Application databases, I dug through my files user myself, using the information that it would be under User/Library etc.

  It took a few minutes of poking around to find it. I deleted it, restarted TB, and the search function is back.

  The mystery that I can't solve it is why the recommended method or research Spotlight of the CMA does not find it in the first place. But with time and patience, the manual search does the job.

  Thanks for the tips, the time and help!

• Error 1714 cannot find the vcredist.msi file when trying to install Visual c ++ 2005 Service Pack.

  Original title: pack visual c ++ 2005 service cannot download.

  Error 1714 in case of failure of the daily requests to download Visual c ++ 2005 Service Pack.

  "cannot find file vcredist.msi.

  Hi ElizabethAustin,

  1. are you able to correctly install the other updates?

  2. What is the update's KB number?

  You can follow the suggestion of measures in this link & check if the problem persists:

  Visual C++ 2005 Redistributable error 1714

  Reference: How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues

  Hope the helps of information.

• Cannot sign the application - cannot find the signature key file: author.p12

  Hi all.

  I have seen this error on several messages in the forum, but none of the suggested corrections works for me.

  I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and followed the registration procedure. The author.p12 and other files exist in %HOMEPATH%\AppData\Local\Research In Motion

  However, when I try to run the following commands, it fails. I also tried to use the graphical help of BlackBerry Tablet OS and I get the same error.

  The only thing I noticed is if I run: echo %homepath%, the result is:------. I can't change what I am on Windows 7 on an Active Directory domain and any changes made to these environment variables does not stick.

  Is there a way to specify the path to the author.p12 file? Help, please! The output is below:

  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>bbwp C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\third_party\node\windows\node.exe" "C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\lib\bbwp.js" C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  [BUILD]   Populating application source
  [BUILD]   Parsing config.xml
  [ERROR]   Cannot sign application - failed to find signing key file: author.p12
  

  Thank you.

  Jon

  I corrected myself. I realized all I had to do was to create a local user (no AD) on my machine, copy RIM folder my HOMEPATH to HOMEPATH to the local user, then run cmd.exe as the local user and sign the binary file. Worked fine!

• Win 7 cannot find the driver on the laptop to HP Deskjet 5600 connected to the office via WLAN

  I have HP Deskjet 5650 color printer connected to desktop Dell Dimension 2400 under Windows XP Home Edition Ver 2002 SP3. I just bought a laptop Dell Inspiron N4110 running Windows 7 Home Premium SP1 64 bit.

  I am trying to connect to the printer via my home WIFI network running through a Netgear Wireless-N 150 WNR1000 router.

  When I add a printer on the laptop, it shows on the list of printers available on the select a printer screen, but when he tries to connect, it returns with a message, "cannot find a driver for HP Deskjet 5600 series on the network.

  I tried to locate the driver manually, but without success. I have an older HP laptop that is running Windows XP, which has always connected to the printer via the WIFI network very well.

  Can I connect the printer directly to the new laptop via a USB port and it recognizes, installs and runs very well.

  But I need accessible and connected permanently to the desktop from the laptop when it is connected to the WLAN.

  Can someone tell me how I can get my new laptop to locate driver files on when connecting via the WIFI network, please?

  Thanks for your help!

  Very well!!  He finally got!

  had to go to the properties of the computor, advanced system properties, system, device installation settings and game to install drivers from windows update if it is not found on my computer.

  Then, it would finally be search on windows update for drivers, but would not yet find a driver even from windows update to the printer when installing it as a network printer.

  I had to add a printer as a local printer, and then select Create a new port, local port, and the port name, I had to enter the path through the network computer to the printer (as "\\desktopname\printername").

  Then and only then, did that pick me from a list of printers, and we found a driver on windows update.

  Yet once again, I appreciate your help! Looks like we may have learned something from this experience.

• 'Adobe CFC Generator' error 'cannot find the ide_config.xml file.

  Hello

  Yesterday, I downloaded a CF Builder 2 trial. I have install in my machine I am running CF 9.01 Dev version.

  When I try install 'Adobe CFC Generator"extension"cannot find ide_config.xml file.

  I'm trying to find a solution. but I just can't.

  Some ideas thank you!

  With ColdFusion Builder 2, a generator of CFCS should be deleted. However, by mistake, CFC generator has been removed only partially.

  If you want to use:

  Plesae download it from: http://adobecfcgenerator.riaforge.org/

  Or if you have a ColdFusion Builder 1 or ColdFusion Builder Beta 2 installation:

  You can take it from \extensions and deploy on your server instead of using the installed incorrectl CFC generator.

  Thank you

  Krishna