Win XP computer locks with administrator

Similar Questions

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Problems with the side of accessibility and shortcuts computer locking

  Sony laptop Vaio Model: VGN-N21E/W

  My Toddler has managed to activate the shortcuts as follows:

  When I press the button 'u' when entering my password at the start of the menu the menu of accessibility and the only way to go beyond, it is to select something from the menu and then choose No.  I know I could reset my password, but I would like to get the problem sorted.

  Once access to Windows Vista is done, whenever I press the key 'L', the computer locks and I have to enter my password again, and then displays the menu of accessibility.

  It would be an understatement to say that it makes me crazy.  I had to copy the l and paste whenever necessary!

  Any help would be much appreciated

  Thank you

  It seems that your a young hit just the right combination of keys to activate the access keys.

  Click on the Start button and type > 'turn on' > and select enable easy keys for quick access in the list.

  Uncheck all the options and select 'Apply', and then click OK.

  What do have?

  Please let us know

  Mark <> Microsoft Partner

• Computer locking when I close the lid

  I have a laptop sony vaio vgn-aw290. When I got it after you have configured the fingerprint reader it would lock the computer when I closed the lid. If I close and open it immediately and it would make me a password. He wouldn't buy support standby or hibernation, it would simply lock the computer. recently, we went to panama, fl on vacation and this feature no longer works. don't know why or how or exactly when. I looked through the settings and power options and may not know how to re - set parameters to lock the lid closed. I also have an HP that has begun to stay unlocked when I close the lid. I would like to know how to configure it to crash when the lid closes, so I don't need the screen saver locks with a password to send it in stand-by or press win + L before I close the lid.

  Hi Mr. Folse,.

  Thank you for visiting Windows Vista Microsoft answers forum.

  You can follow the procedure below to change the Power Options.

  1. Click Start, then Control Panel.

  2 double click on Power Options.

  3. under "Advanced", set the option "When I close the lid of my portable computer" according to your preferences.

  If the steps above fail then I suggest to run a system restore to a date when the option was working properly.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. You can visit the link to the KB Article for reference: http://support.Microsoft.com/kb/936212

  Please let us know if it helps.

  Thank you and best regards,
  David

• I phone 4S locked with id

  I phone 4S locked with apple ID. Cannot open with my id and password.

  You can also use iTunes to connect to your iPhone, if you talk about iCloud locking.

  Sometimes, there are some problems in the DNS of your computer or your network.

  If you are on windows PC, then open the administrator command prompt and type this command

  ipconfig/flushdns

  Now try to connect to your apple ID connect your phone to iTunes.

  If this does not help then try to reset the password of your apple ID. Sometimes, you don't remember that you have already changed the password. happens to me

• Computer locked out, says incorrect password, has not changed the password.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: computer locked out, says incorrect password, haven't changed the password.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  These things don't happen by themselves. Once you're in the system, do a thorough analysis of the malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Access denied on a "documents and settings" folder in windows 7 with administrator rights

  I get access denied on the ' c: \documents and settings "in windows 7 with administrator rights.  The icon shows a small lock on the (very cute) folder. Permissions indicate full control to the folder. I can only access the contents of the folder by adding it to the library folder. The computer is fairly recent and is very near of the original factory. Unlike my precious computers I left it mostly original except for the odd new program. I never really noticed when it pops up as I was getting used to format windows 7 and thought that it must be "the new way" to 7 " The disk has been partitioned by Asus, which significantly added to the confusion. Now I think that it why documents and settings would be in the same folder anyway?  What is a level administrator uber folder? Any ideas greatly appreciated.

  "Documents and Settings" are not a folder - it's a junction Point.

  It is there to allow legacy applications using the latest Windows 7 folder structure.

  There is nothing in what you can use.

  See here for more information about Junction Points:

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  It would have been clear if you looked at the Related Posts - that's what they are there for...

• Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

  6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

  Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

  iPhoto 11 (9.2.3); OS X 10.6.8

  On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

  LN

• MacBook pro locked with a password of the firmware, Help!

  I have a macbook pro, end 2011, which is locked with a password of the firmware, and I do not know. Are their any of you know how powerful hardware hacks, and no one knows a way of hacking the firmware lock? I tried to avoide paying someone to fix my machine and unlock the firmware, then I tried a lot of material tweeks likely to pass the lock of the firmware and unlock my computer. Please help and thanks in advance for all this you find to do it yourself Tech who would rather their firmware password reset themselves. Thank you.

  See this article:

  http://osxdaily.com/2015/01/28/forgot-Mac-firmware-password-what-now/

• Envy of HP DV7 - 7233nr: decommissioning victory 8.1 for win 7 computer hp laptop dv7 envy

  I've recently upgraded to win victory 10 8, I am not satisfied one or the other. I bought Win 7 Professional SP1 64 bit generator system "OEM" the other day. I would like to erase the hard drive and install Win 7 pro.

  I don't know if it's easier to re - install win 8 on one partition and win 7 on another. I have the factory restore disks for win 8, which came with this pc. Have never created two partitions, I'm sure I could handle it, but I have now that I won't have the drivers for win 7 on this computer.

  I think I can do this with good help and I ask for this help PLEASE.

  Sincerely,.

  John "stuck".

  I'll keep my fingers crossed and go from there. I'll look around for other similar situations. As I sit here and ponder this object I'll probably imagined more questions to ask. But meanwhile your top shelf and we will no doubt talk again.

  John

• Air iPad - iTunes does not recognize the recovery mode because it detects that the device is locked with a password

  Well I'm really frustrated here. I have an iPad Air that I bought for my roommate who unfortunately passed away in October, and so his family gave me his iPad Air and all the other things I had bought for him.

  Here's the question. iTunes appears whenever I turn it on and says he can't go because its locked with a password. Good not much according to Apple's site, I reboot into recovery mode... Problem is... nor iTunes 11 or 12 will be pop - up and say its been detected in recovery mode, even if I restart the computer and then reopen iTunes.

  What I'm missing here? I am running Windows 8.1, the computer recognizes that its been plugged with two modes... It is the thing of most frustrating I've ever lived and I can't do it in recovery unless its connected to the computer. I tried pressing the home key, which starts just the iPad as usual, as soon as I fix the cord. Also, I don't know what version of the software is (I guess 7 since he never really used) - apparently different versions of the software have different recovery quirks.

  I tried the DFU instructions and powers of the iPad on the same before Apple logo the first 3 seconds that you are supposed to hold down the power button.

  I am disabled and home because of the panic and anxiety so go to the Apple store isn't something that would be easy for me so if anyone has a solution, I'm all ears.

  It was easier to make a gold card HTC that is to delete this thing and that says a lot, considering the amount of work went into those back in the day...

  One last thing. iTunes will NOT open if the iPad is already connected. I have to unplug it, forcing iTunes close then reopen.

  Post edited by: Saeren

  You should try to do a hard reboot on the air of the iPad, press and hold the power button and the home button until the apple logo appears.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• Cannot delete the account of a user with administrator rights

  I want to remove a user who has administrator rights account.  Win XP machine has two users (Administrator and a user name) that both are of type of administrator account.

  I you as an administrator and should be able to change the other named to Limited user account, but for Limited is greyed out.  The option to delete the named account is not present.

  How can I delete this account, leaving only administrator?

  Often, I find that using the command line commands gives errors better when you can not do something.  Try the following:

  o bring a window prompt (start-> Run-> "cmd")

  o enter the following command in the window:

  net localgroup administrators

  o that it must return a list of all users with administrator privileges.  You should see the built-in user 'Administrator' and your other user (assuming that both have administrator privileges).  To remove administrator privileges from the user (assuming that this another username is "Joe"), then enter the following command:

  net localgroup administrators Joe/remove

  If this is not possible, an error no doubt will provide you with enough information.

  HTH,

  JW

• I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Error: 0 x 80070005 access denied.

  I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Now, I am trying to perform an action that requires me to use the program of scheduled tasks. I have problems with passwords and user ID. It defaults to the Userid of the machine number/administrator. I put the password when asked, but I was rejected when I finished to complete the scheduled task that I perfom. The scheduled task, I wanted to do was simply to have iTunes launch and play a song both partiucular. After completing all the details, I must click on 'Apply' or 'OK' and then I get an another dialog box asking that I get the password once more. I enter the password I put at the beginning when the application Assistant came on - but I get access denied - and the error number 0 x 80070005. Help, please. Thank you. * E-mail address is removed from the privacy *.

  original title: "error: 0 x 80070005 access denied."

  Hi HaikMuradian,

  For this particular issue, there is a fix available, you can contact Microsoft Customer Service & provide article 904423 which contains the fix.

  Reference: Error message: "0 x 80070005 access denied. You are not authorized to perform the requested operation"

  Hope the helps of information.