Win7 and SSD - once for all discs?

Similar Questions

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I forgot the password for Windows 7 laptop and password required for all downloads

  No disc reset was created before there is another established user except the guest account, but even with the admin, a user lost password password rights is required for all downloads and updates. Cannot download even a password cracker because it requires a password to complete all downloads. What can I do? It's very frustrating.

  The legal option only when you do not know the password is to copy your files, you have all to CD or another drive for backup, then clear the computer and reinstall Windows.

• Once for all - please

  Hi all
  
  I used CF for several years now and bought Flex as soon as he was released. In my process to understand how Flex manipulated remote objects for CF, I decided to use the Assistant Creation of CF for Flex that creates all kinds of beautiful CFCS and other things to connect to a database and the CRUD data inside. OK all well and dandy on the local machine, works very well, I'm impressed! This is until I try to download the application for my shared server (HMS) and I get all sorts of error messages as cryptic:
  
  error ID (mx:rpc:Fault) #0 = 0
  faultCode = "Client.Error.MessageSend"
  faultDetail = "Channel.Connect.Failed error."
  NetConnection.Call.Failed: HTTP:Status 500 "
  faultString = "send failed".
  message = "faultCode.Client.Error.MessageSend faultString:"Send Failed '"
  error faultDetail:'Channel.Connect.Failed
  NetConnection.CallFailed: HTTP: status 500 "name ="Error ".
  rootCause = (Object) #1
  code = NetConnection.Call.Failed.
  Description = "HTTP: status 500".
  Details = "' http://www.MYDOMIAN.com/flex2gateway/ ' level ="error""
  
  So I read the DOCs and read all the blogs I can find on the subject, but nobody can give a clear answer as to why I can't do this job on a shared server if I can make it work on my local machine, hell, I can even tap into the MySQL database on the server shared via Flex builder. I use HostMySite.com with CF package if that helps.
  
  If it's just a matter of something on my end to host that I need them to set up for me it would be nice to know, or if I simply can't use Flex and CF together on a server all shared together. It would be nice to know. But for all the hype Flex did and how easy is it supposed to be to create an app with CF, I wonder why someone can't answer this question once and for all. I know that others have posted to this and many other forums asking the same things I am. Is it too ask one of the Gurru of Adobe Flex, or anywhere else for that matter to help us?
  
  Not everyone wants to run their own server, and I think Adobe would have kept that in mind when creating Flex, and how he'd shared servers.
  
  So please if someone can help understand it please let me know.
  
  Thank you

  halodev:

  When I had my problems, I didn't have to touch the con. Correct XML file their and I initially worked in my localhost too. So, I don't know.

  I only did the site Flexstore-like as a study project. It is not real for any client project, and so I don't mind share. It might be a good idea for you to check the code just for comparison with yours; If you want, send me an email and I'll send you my mxml files.

  Carlos
  [email protected]

• Scanning continues to not work for Mac OS 10.6 and 10.7 for all-in-one printer, HP Officejet 6110

  Scanning is broken in Mac OS 10.6 or 10.7 for all-in-one printer, HP Officejet 6110. It seems that only old versions of Mac OS will scan. I realize than products account "age" but it's really - poor behavior that HP and Apple cannot support such a function based on a very popular printer.

  Information on scanning support is circular at best and misleading at worst. A Bulletin Board suggests the purchase of a third party program to do the scanning 'work' for the Mac. Terrible.

  There should be a patch for it. It is really unacceptable and tarnishes the reputation of Hewlett-Packard and Apple.

  (Forgive me if this sounds like a sales pitch, it is not intended to be, and I'm not in the sale by any means - it's just the logical thinking process, I would in your situation).

  Option 1: Get Vuescan

  Pro - you can scan... as long as the printer is working.
  Con - given that electronic devices are usually only expected to last 5 years or more, your 6110 could go at any time, hence the need to upgrade. Improved printer support the most recent OS and the need of Vuescan would go, resulting in a loss of $40.

  Option 2 - upgrade
  Pro - new product will be compatible current OS with a complete solution, have more physical features than your current product and a warranty.
  Con - it's pocket money-, but looking at the Con in Option 1, you could potentially spend AND pay $40 for additional software, so in the grand scheme of things, it would be the least expensive option and best bang for the buck.

  These are my thoughts on this subject, take them for what they are worth. Whatever you decide, I hope everything is working well for you and happy that you have found an alternative solution (always nice to have more options)

• BlackBerry Smartphones Can I have a blackberry and not pay for all the internet services?

  Hi I'm new on this and my t-mobile phone that I broke and I looking to upgrade to something that will help me to stay a bit more organized, but are unwilling to pay for the service package that comes with the purchase of a blackberry from t-mobile. I know that I could get one on craigslist or ebay or something and I was wondering if I could just put in my Sim Card and it would have all the functions without the internet and emails. All I really want to the phone is easy navigation, good organizer, easily send SMS and calls. Thanks for the help! -Sully

  Sully, Hello and welcome to the Forums of Support BlackBerry.com.

  Sorry, no. Without the BlackBerry data Plan, you will get very little data from the device functions... voice and SMS, Yes. Calendar, contacts, etc., Yes. No RIM push email.

  You can use the Opera Mini browser for the internet with the setttings TCP active for a browser for free... just watch your billing and ensure that you are not charged.

  http://www.BlackBerryFAQ.com/index.php/What_are_the_TCP_and_APN_settings%3F

• Change the mouse click on display once for all the clicks?

  When you create a demonstration of the software in Captivate, I would like to change the mouse click default Visual to the custom effect 'blue circle' for all clicks.  Is there a way to change the default or modify all mouse clicks with an entry?  It is possible to change the shape of all occurrences of the mouse pointer by right clicking a mouse, but it doesn't seem to be a similar option for the click of mouse vizualized.
  Thank you, in advance.
  

  Try this option in the PI (Inspector):

  

  Kind regards

  Michel

• G62-340US: the best RAM and SSD together for an older G62?

  I want to improve my old and slow HP G62 with a new SSD and RAM and I have a few questions.

  First of all, I found two very similar RAM packs on Amazon and I don't know what is the difference or one that will work with my laptop?

  http://www.Amazon.com/crucial-PC3-8500-204-pin-CT2K4G3S1067M-CT2C4G3S1067M/DP/B008LTBJFM?ie=UTF8&key...

  http://www.Amazon.com/GP/product/B005LDLVAO/ref=cm_cd_asin_lnk

  Second, it is possible to install an SSD in the computer? And if that's the case, what is the recommended product?

  Thirdly, if I replace my hard drive with an SSD, should I buy another copy of the operating system or is at - it a way to save that?

  You want the package of upper memory which is the right speed and density of your laptop. The other memory is more recent and probably not compatible. The top of the page says memory is for a Mac that is not in itself a problem, but you may want to consider the memory recommended by HP:

  4 GB (for models 1.1 and 1.2 only) 599092-001

  http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1459805725&SR=8-1&keywords=599092-001

  Absolutely, you can install an SSD on the laptop. Assuming that your 10 Windows is activated you can do a full system image bootable Windows 10 or you can install clean media media creation tool again and the activation of just MS servers identify your computer and you will be activated again even if you change the hard drive.

  Let us know if you need help most.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• Adding list based menu only once for all pages

  Hello
  
  I have an application level one tab. For a given tab, I have 5 different pages. I would let the end user navigate to these pages via a list box. Currently, I added a list box to all five pages and assigned the same list item to these regions from the list.
  
  Is it possible that I add this list based menu once, at my request or it is the normal way to do?
  
  Is it possible to leave
  
  Kind regards
  Tamas

  Use the zero page.

  Add regions with lists of each tab in the same region display point on page zero, making each conditional region by using a condition "Current Page is contained in Expression 1...".

• Once for all, I'll be able to transfer to a new PC or not? Retail Win 7 Ultimate to win 10

  Hi all!

  I spent most of my night navigation on these boards, trying to find an answer to this question and found tons of answers, many condradicting between them and some even condradicting the EULA, so I'm stuck. I'm to the point that I think I know the answer but I havn't really got confirmation.

  Heres so the deal:

  I havn't improved again and I plan to do more, but... this computer is starting to become old enough and I'm planning for a new build soon enough, don't expect that adequate material being released, Pascal ftw!

  I don't want to upgrade my Win 7 Ultimate retail to win 10 just so he can be locked on this current computer specification, so I just keep my Win 7 cause frankly it has served me very well, but if there is a chance that, after upgrading my license will be mobile to my new future computer (that I will be buying in the coming months) , then that is a leap of faith, I feel I must take.

  Thus,.

  IF I go now, I have 2-3 months will be able to use a bootable USB key with a Win 10 on my new computer image (after wiping this computer ofcourse) and everything will work?

  In view of the many questions on this subject, I suspect you educated people are pretty tired of that question now, but please bare with me and give me some closure, I'm literally pulling my hair :)

  Kind regards

  Fredrik

  Your Windows 10 Pro free update was derived from a Windows 7 Ultimate full retail license. When you upgrade, the Windows 10 Pro inherits the basis of qualification of licence fees, in this case the retail.

  If its a license fee or OEM like Dell or Acer brand OEM, the OEM rights remain.

  How to transfer your license of 10 Windows to a new computer

  You are free to spend your license of Windows 7 where you decide, because it is the right of the license of Windows 7.

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

• My disc drive tells me what drive is in it, but says it is empty for all discs. What could be the problem?

  I put in a disc and go to the media, he tells me what disc is in but says it is empty.

  You can try running this:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• My eyesight is poor and police program for all that is too small, Menu, Options, tools and low scroll bars and panels is almostimpossible for me to read. Can we adviseme?

  My eyesight is poor. Kind of a contradiction for a photoshop user I know. But maybe by someone (friend, Geek) my police program, the menubar, the options bar green and almost impossible to see or capture and horizontal scroll bars. I almost can't click on that too narrow scrollbars. Can anyone help? Thank you

  Advance

  NIC

  Hi nicm49770368,

  1. Preferences try - - interface - IU - 200% font size
  2. Restart PS and check again.

  

  Concerning

  Rohit

• Gray and white table for all other records (line)

  I have the page that queries records db and outputs to a page to display (html)
  I want to know if I can get an output that shows a slight difference for every other row (record). For e.g. first line would have the lesser gray color and the second line would be white color. This is repeated.
  Thank you
  What I write.
  It is in html, cf?
  Like the cells below:
  Like the coldfusion forums page. (for clarity)
  
  
  
  
  
  
  
  
  

  Something like that;
  

  
  column headings
  
  
  stuff of detail
  closing tags

• Urgent-renamed the folder in the folders and now error for all users?

  Hello
  Well I asked me to shorten a name in the shared folders and so I changed it. Now, I get an error if I click on tables of edge or shared folders (which is empty now btw?) or a catalog management, its display:
  
  Target path not found (operations customer/Shared /) error Code: GZ8VXQ96.
  
  Are we not supposed to create a folder in the folders and then change the name?
  
  Help, please. The server administrator BI tells me that everything the world reports are currently not available.
  
  Years

  Are we not supposed to create a folder in the folders and then change the name?

  You can, but as we are engineers, you can also expect impact of this...

  fix your problem is:

  1 rename the current folder in older...
  2. now, try to perform the operation and everything by doing this, you might have seen as option: preserve references to the old name of this item. below the field to rename...
  3. give the new name and use the name option preserve...