Window 7 and 8 delete partition and format option

Similar Questions

• Vista Ultimate and no. Windows Fax and Scan option

  I use Windows Vista Ultimate SP1, checking that the scanning device shows in scanners and cameras - status = ready but Windows Fax and Scan is not in my Start Menu.  I think that's where?

  Thank you-

  Hi Pmd10,

  You can type fax and scanning in the start search box and the option should appear in the upper part of the menu, or you can check if these steps also.

  1. Click Start > Control Panel
  2. Click turn on or off windows features

  If the scan and fax option is enabled, try to uncheck the option, and then click ok

  Restart your computer and check.

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Deleting previous windows files and startup options

  I have re installed windows 7 two times after my windows has been damaged by the own mistake to merge two partitions in 1 partition, but now on turn on my laptop, I have to choose one of the three windows. I tried to boot from the other two windows as well, but it does not start that's why I want to put an end to this problem. Please guide me how this problem can be removed without affecting my data stored in the same disk in which two windows have been installed?

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager. http://NeoSmart.NET/DL.php?id=1

• 0xC004E003 error code when you try to activate Windows 7 and no option to activate by phone

  Hello

  I have a Dell Inspiron 1545, which has a Windows 7 sticker alongside Intel inside the thumbnail but no sticker code product key on the underside of the machine.

  I used Belarc Advisor to extract the Windows 7 code

  I formatted the hard drive and then install a new copy of Windows 7 Home Premium (x 64) SP1

  When I try to manually activate Windows it says;

  The product key of Windows 7 Edition Family Premium you typed is invalid for activation
  -Buy a new product key online
  -Type a different product key
  -Contact Microsoft to help solve this problem

  There is no option to activate by phone

  If I run slui.exe 4 into the start menu there is still no option to activate by phone and I am presented with error 0xC004E003

  I have no recovery disks

  I have re-entered the key several times to ensure no typos

  I ran the Microsoft Genuine Advantage Diagnostic Tool (see below)

  Please can you help me; How can I activate Windows?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {C56B1BD2-381F-4F2D-A2B0-5AA4585226D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {C56B1BD2-381F-4F2D-A2B0-5AA4585226D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-2155029683-75514483-3985887220Dell Inc.. Inspiron 1545 Dell Inc.. A13 20091023000000.000000 + 0004D1D3407018400F808090409GMT Standard Time(GMT+00:00)03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-2057-7601.0000-0592014
  Installation ID: 001311746226482756537303464386367990967310879153630246
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 40380 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 28/02/2014 11:58:37

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqiK2 + zy2jM2LCgfdg5UbdYEJn9Gyg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  Hello

  The product key that BelArc concludes on licensed OEM machines (Dell, HP, Acer, etc.) is not adapted to the re-installation.

  This PK was for factory installation on several machines during production use.

  You need the product key on the COA sticker.

  As it is not on the underside of the laptop look in the battery compartment.

  

  See you soon.

• Clean install of Windows 7 - partitioning and formatting with a new drive

  I tried two installs with Windows 7 Ultimate edition.  The first is a straight out of the box and installed in a laptop SATA drive.  Windows 7 has created two partitions, a small partition of specific recovery and system information, and another large partition to install Windows 7 software.  It is very good.

  Then I tried a new installation formattiing the reader as one big partition.  Windows 7 does not divide the disk into two partitions, only one on which the software of Windows 7 has been installed.

  The question: how it installs a Windows 7 for the two partitions on a formatted drive?  Delete the existing partition and then start installation?

  Hello Askit,

  When you install Windows 7, the installation program will by default create a partition of 100 MB with the Windows partition system. The system partition is created to meet a requirement of Bitlocker startup files and Windows files are found on separate partitions.

  When boot you from the DVD to perform a clean installation of Windows 7, the installation program will create the 100 MB system partition in the following conditions:

  • There is not a partition system on the machine
  • The system does not have 3 existing partitions
  • There is space on the disk for the extra partition

  In response to your question, Yes, the best way to get these partitions is to delete the partition and let the windows to their creation.

  I hope this helps.

  Thank you

  Bobby

• How to format and re - install Windows 7 using recovery disks/Partitions?

  Hello..

  My product-

  HP DV4-5109tx

  Windows 7 (64-bit)

  I have a free space of 78 GBs that I'm not able to use... As when I try to use the "disk management" and right-click on the free space to "format partition" this option has been grayed out... !!

  Please suggest if I can use this space without formatting? (I was suggested for formatting)

  In addition, due to some other issues too I want to format my Windows (and reinstall) IE drive C so that the free space problem can be solved... Also I don't want no data in my other drives to be formatted...

  I have the recovery partition and the recovery disks sent by HP...

  Please help me how I can use them to solve my goal...

  Thank you

  It's simple, as I suggested in my previous post.

  Once you have a drive like the one on the image management window simply click New Simple Volume. Create a new partition called "New Volume". Make a right click on it and the option to format it will appear.  The strips on the 75,38 GB of free space in your image indicates that the selected action will take place on this point in the disk management window. You can change the name for the new volume in Windows Explorer.

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• How to repartition and format the extended partition and logical drives in Windows Vista?

  How to repartition and format the extended partition and logical drives in vista?

  Disk management...

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Installed Windows on the bad disk partition (C :) and meant for the recovery disc (e :)))

  Hello world

  My question is that I installed windows vista on the wrong partition. When I tried to do a re-install for partition recovery (e), I saw that the drive (C :) local was still installed with my last error when I first installed it on drive C: (OS) that is full. I didn't want to do, that I was going for the recovery disk (E :).

  If I re - install windows on the recovery disk now, he will have to complete partitions. I'm just completely start over as if I first had an empty space to install an OS right the first time around when choosing the right partition.

  It is on a latitude D630, where the BONE was full and the Data 2 which is the recovery disk (e) has free space that should have (c).

  Any help is grateful, thank you.

  Make sure that the important data that you have on the drive is backed up.

  Boot from the Windows DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Format Windows 7 and the installation problem

  Hi, I have a problem of windows I'm getting conflicting solutions when I search forums. I have a Dell laptop that I bought in 2008, which came with Vista Home Premium 32 bit. Last year, I decided to buy a drive to upgrade to Windows 7 Home Premium 32 bit. Last days, I experienced a large amount of blue screens, closures, slow behavior and I finally decided to bite the bullet and reformat. My problem is I have more drive Vista OEM with me and what I read online the win 7 upgrade product key only works if I'm upgrading from a current version of Windows. Both products are authentic and I am willing to share this information to purchase with Microsoft. Is it possible to get a clean install of Win7 key in this case or any other alternative suggestions?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• When you use firefox, a new firefox window opened and blocked to continue using firefox unless I have a fine. I can't delete the page or even let him. Any help?

  The new window is "http://block.policehunt.org/?id=d04201572567089f9b464bbb1b065531". It is said in very rough English that they recorded me have access to child pornography and in order to unlock my browser, I have to pay $300 through some point of payment. When I try to close the window, a pop-up asks you, "do you want to leave this page? IF you click Yes, it flashes and repeats the same pop-up over and over.

  The English used in the message indicates it is clearly a fraud... it seems that maybe a virus, even if I have an internet virus scanner.

  Any suggestions how to "selectively" delete this 'blocking' window without having to reset firefox entirely?

  Go ahead and force close Firefox by using the Task Manager.

  CTRL + Shift + Esc > process tab > select firefox.exe > 'End process' button

  Then open the currently active settings Firefox folder by using the search box of the start menu to open this short address:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  If you see more than one folder, click on in the most recent. If there is only a single folder, click on in this.

  Search for files beginning with sessionstore. Generally, you will find sessionstore.js and sessionstore.bak. If Windows hides file extensions, you can view according to the method described in this article to support: http://support.microsoft.com/kb/865219.

  Rename sessionstore.js to something like sessionstore_bad.js file, so that Firefox does not restore this last series of windows and tabs automatically.

  Leave this window open, and then restart Firefox.

  If you want to reopen some of the pages of the last session, you can use the tips in the following threads for 'mine' the sessionstore_bad.js file to extract the URL:

  • Using the Console of Firefox browser (formerly Console error): https://support.mozilla.org/en-US/questions/969046#answer-471950
  • Use Firefox developer tool 'Notepad': http://forums.mozillazine.org/viewtopic.php?f=38 & t = 622036 & start = 60 & p = 12098147 #p12098147

  Success?

• I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

  I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

  -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them