Window box and superposition of waterfalls massage

Similar Questions

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• Why do I get different results for the same resolution but different boxes of Windows, Windows 7 and XP

  I use an .exe on two different windows boxes, in Windows 7 and XP.  I put both for resolution 1024 x 768.

  Win 7 (old laptop and Dell desktop computer) I have a large application to watch.  On the WIn XP boxes all fonts to big.  It doesn't make sense for me as all PC's have the same resolution.

  Has anyone go through this before?

  System for XP and Vista/Win7 fonts are different.

  See

  http://forums.NI.com/T5/LabVIEW/elements-have-moved-when-opening-VI-with-F3-patch/m-p/1054817

  http://forums.NI.com/T5/LabVIEW/what-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...

  http://forums.NI.com/T5/LabVIEW/font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...

  and several other similar topics.

• How can I remove windows box office and upcoming facebook in the start menu

  How can I remove windows box office and upcoming facebook in the start menu

  I moved your question answers feedback to Windows desktop and personalization areas.

  You care to offer up what version of Windows, you are talking about but if it's Windows 7, I would right-click on the offending list and either:

  1. Remove from this list , is that the entry is in the most recent lower part / area most often used.
  2. Delete the Start Menu if the entry is pinned in the Start Menu (above the most recent / most often used).

• I downloaded the upgrade for windows 7 and a .box file, which I can not open. How do we install?

  The download is Win7-P-Retail-en-us-x86.box.  I have no software to open it - I'm currently running vista.

  See if the article below will help you:

  How to create and make Bootable in Windows 7 ISO from EXE Plus Setup1.Box and setup2. Box
   http://www.mydigitallife.info/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  Kind regards

• The search box is missing in Windows Explorer and the search is not available from the Start button on the desktop

  I want to search my hard drive for a file.

  I open explore and there is no search box, or all the options to search.

  I click Start.  There is no box that allows me to type in the name, I'm looking for.

  Any suggestions on what setting or service may be disabled or stopped which disables the search options?

  Hi jhblzk.  The name of the service is Windows Search, but even if it has been disabled, you should always see the box "search programs and files".  No harm to check though.  Press the Windows key and r on your keyboard and type:

  services.msc

  and click OK.  Scroll down the page until you find and make sure that the startup type is set to automatic (delayed start) and the service status is started.  If this is not the case, click on start and OK your change.

  If the service does not exist, go to programs and features in Control Panel and click on "turn Windows features turn on or off.  Scroll down and check Windows Search.  OK, your changes and restart.  The search box appears when you click Start now?

  MVP (Windows desktop experience)

• Message box color settings disabled when you use the dialog "Windows color and appearance".

  When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid?  I want to remove the default 'Pastel Pink' value that I find unacceptable.

  I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired.  You can only take "Classic Windows" for many years.

  Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.

  Help, please!

  Me too I'm frustrated by that.   Found the old windows with very honest XP environment.   I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made.   It is just Frigging trial and error and very frustrating.

  Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name?    It is a productivity KILLER.

  Hello

  Interface user of Windows 7 is theme based. The colors are defined by the theme.

  You still have many color options that can be used to change the colors.

  Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.

  You can select one of the colors in the boxes colored at the top.

  Adjust the intensity of the color with the cursor.

  Click on the color down mixer and you can a lot of variations on all the different color choices.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I own Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to

  I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.

  Help, please

  Post edited by: Bil Colthurst

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server

• Can forms 6i, 10g and 11g coexist in the same windows box?

  Hi all.
  
  Is there besides using different ORACLE_HOMEs, any consideration to take into account to install 11 g and to coexist with 6i and 10 g?
  
  I just do a 11g installation, and in addition to having failed, he also do my 6i installation unusable.
  
  Your comments will be greatly appreciated.
  
  Best regards, Luis...!

  Yes, all three can co-exist on the same Windows box. I currently have Oracle Froms 6i and 10g R2 or 11g R2 installed on the same workstation. The builders of form work well, however if you plan to run a form from the forms Builder, you will have conflicts between the (Forms 10 g) OC4J and WebLogic (form 11 g) server. I was able to work around these conflicts by changing the system path and make sure that the inputs of 10g of forms appear before 11g entries when I need to run a form from the Forms Builder 10 g. Conversely, to ensure that 11g entries appear before 10g entries during execution of a form of the 11 g Forms Builder.

  I saw a thread where someone said that they were able to work without having to modify the system path, but I was unable to find this thread again to test their solution. You can search this thread if you do not want to change the system path every time.

  Forms 6i come into conflict because it uses the forms instead of an application server Runtime to run a form from the forms constructor.

  I hope this helps.
  Craig...

  Published by: Silvere on 7 February 2013 13:12

• I get a pop-up window at startup every time that says: "cannot open osoyugup.dll, Access is denied." I close the box and everything seems to work normally.

  Why do I get this popup each time, and how to fix it?  I did a system repair and re-installed xp pro, but the pop up still appears whenever I turn on the PC.

  See if the following sounds like your situation:
  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can still find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that systems currently has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I'm running on Windows 7 and my close tabs are blackened?

  The tab at the top right of the page is blacked out. This is the tab for
  closing Firefox. When I click in the black box where the close button must be; It closes.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you use a non-standard windows theme or other changes in appearance then trying to return those and use a standard theme (different).

  • Control Panel > personalization > Theme & window color and appearance

• When you use firefox, a new firefox window opened and blocked to continue using firefox unless I have a fine. I can't delete the page or even let him. Any help?

  The new window is "http://block.policehunt.org/?id=d04201572567089f9b464bbb1b065531". It is said in very rough English that they recorded me have access to child pornography and in order to unlock my browser, I have to pay $300 through some point of payment. When I try to close the window, a pop-up asks you, "do you want to leave this page? IF you click Yes, it flashes and repeats the same pop-up over and over.

  The English used in the message indicates it is clearly a fraud... it seems that maybe a virus, even if I have an internet virus scanner.

  Any suggestions how to "selectively" delete this 'blocking' window without having to reset firefox entirely?

  Go ahead and force close Firefox by using the Task Manager.

  CTRL + Shift + Esc > process tab > select firefox.exe > 'End process' button

  Then open the currently active settings Firefox folder by using the search box of the start menu to open this short address:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  If you see more than one folder, click on in the most recent. If there is only a single folder, click on in this.

  Search for files beginning with sessionstore. Generally, you will find sessionstore.js and sessionstore.bak. If Windows hides file extensions, you can view according to the method described in this article to support: http://support.microsoft.com/kb/865219.

  Rename sessionstore.js to something like sessionstore_bad.js file, so that Firefox does not restore this last series of windows and tabs automatically.

  Leave this window open, and then restart Firefox.

  If you want to reopen some of the pages of the last session, you can use the tips in the following threads for 'mine' the sessionstore_bad.js file to extract the URL:

  • Using the Console of Firefox browser (formerly Console error): https://support.mozilla.org/en-US/questions/969046#answer-471950
  • Use Firefox developer tool 'Notepad': http://forums.mozillazine.org/viewtopic.php?f=38 & t = 622036 & start = 60 & p = 12098147 #p12098147

  Success?

• I can't do the long search box and the shorter address box.

  As above. Even with the 'customize' window so that the icons can be moved or deleted.
  I tried to put the search boxes and address next to each other, but scaling is not yet an option.
  I use Firefox on a MacBook Air running Mountain Lion.

  You must do the resizing in normal mode and not when the Customize window is open.

  While in normal mode (and not in customization mode), you can place the mouse pointer between the address bar and the search bar, and it will become an icon of resizing that you can slide right or left with the left button of the mouse to change the relative width of the two bars.

  • https://support.Mozilla.org/KB/search+bar

• HP Envy 17 t Select: downgraded to Windows 7 and works great but...

  I can't get rid of the Tablet, I use a mouse.  I uninstalled the drivers and rebooted and it was out of the (real) then I shut down the system and when I restarted the next day it was back!

  I need help...

  Hello

  If the Synaptics driver is still installed (and continually reinstalls when removed), it may be easier to just disable the device, but let the driver installed - you can do the following.

  Hold down the Windows key and press R.

  In the run box, type devmgmt.msc and press ENTER.

  Expand "Mice and other pointing devices" and then right-click on the entry of Synaptics, select Properties, click the driver tab and then click Disable.

  Kind regards

  DP - K

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.