window menu and the welcome eMachines window continues to display

Similar Questions

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Black background in the Menu and the bookmarks toolbar

  The background color for the Menu and the bookmarks bar is black and what is happening no matter what theme or character that I use. All other toolbars will change with the theme, but not the two above

  This has happened

  Each time Firefox opened

  == improved FF 3.6

  Have you tried to disable (uninstall) the Personas add-on?
  Do you use the Persona and the theme at the same time?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

  If you have many extensions then you first activate half test extensions that half the problem.
  Continue to divide the bad half that still has the question until you find that one is causing it.

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• JumpLists disabled; 'store and display of recently opened items in the Start Menu and the taskbar' is greyed out

  My option 'store and display of recently opened items in the Start Menu and the taskbar' is grayed out. Are also grayed out any mention of "jumplists" system (i.e. the number of items to display in the jumplists). Have I inadvertently disabled this feature? If so, how can I return it?

  Hi, landonblaine:

  When the option store and display recently opened items in the start menu and the taskbar is disabled and grayed out, it is a symptom that two Windows fonts are applied to your system.

  Open the Publisher of the registry (Regedit.exe) and navigate to this key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer. If there is a registry that NoRecentDocsMenu value set to 1, delete it. If there is a registry that NoRecentDocsHistory value set to 1, remove it as well.

  Repeat the same steps in the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer registry key (it cannot exist).

  Restart your computer and see if the problem is resolved. Microsoft MVP Windows Desktop Experience

• 40L5443DG TV: how to change the color of the menu and the guide?

  Hello
  I'm happy with my new TV 40L 544 3 DG.
  But there is a but.

  How can I change the color of the menu and the guide?
  The grey of the text with blue-gray background is not good for my eyes.

  I can change the color by editing a css file in the firmware?
  Please give me a solution.
  Thank you very much.

  Mike

  > Can I change the color by editing a css file in the firmware?
  
  N °

• My second monitor lost functions of the menu and the image.

  Original title: monitors identified with reverse pilots

  I upgraded my second monitor.  After loading the new driver for it, he was assigned to the old monitor and the new monitor is now the old driver.  Features on the old monitor do not work and I had to make the new monitor my primary monitor. It's ok but the old monitor lost functions of the menu and the picture is now crap.  Also, when I open PS it is said that the profile of the monitor is deffective. I ran the calibration software, but that did not fix it.

  It looks like this: in the display settings, in the drop down menu below the pictures of the monitors, number 1, said SyncMaster 2443BWT on NVIDIA GeForce GT 9599.  Number 2, said SyncMaster digital S23A350H on NVIDIA GeForce 9500 GT

  This is backwards.  How can I get the correctly identified.  or is it important.

  Thanks for any help.

  Loïc

  I ended up uninstalling the driver for the 23 "and disconnect.  This put the 24 "at number 1 and automatically back to the only driver left, 24".  Then restarted with the 23 '' reconnected.  It assigned the pilot generic and in fact number 2. Yes the 23 "works very well on the generic driver and I have the right driver for the 24" so I'll leave well enough alone...  I had downloaded the drivers from the monitor on the Samsung website according to the instructions on my cd that came with them.   I never thought to check the updates on my nvidia graphics card.

  Thank you very much for this information.  I'll do this and keep my fingers crossed he doesn't mess up something else.  This Vista is so tempermental.

  Loïc

• How can I change the size of police/image on the menu, and the taskbar?

  How can I change the size of police/image on the menu, and the taskbar?

  Depends on your version. Earlier versions supported screens high resolution. The creative version cloud has an option in the preferences, but it is limited on options. 100%, 200% and auto.

• Hi I use PH CS6 on an IMac, I try to print a picture when I clicked on what kind of paper I wanted to use from the dropdown menu and the photos the two disappeard. W when I tried to print the same photo I get this. There was an error poening your printer.

  Hi I use PH CS6 on an IMac, I try to print a picture when I clicked on what kind of paper I wanted to use from the dropdown menu and the photos the two disappeard. W when I tried to print the same photo I get this. There was an error poening your printer. print functions will be unavailable until you have selected a printer and reopened all documents. If I open the picture in preview oe my IPad it will print. So, how to choose a printer in PH CS6? Thanks John

  Jakee, salvation

  Please follow the steps below to reset the photoshop preferences.

  > Hold down Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.

  Note: Using the hotkey, preference files for custom shortcuts, workspaces, and color settings will also reset to the default.

  If you are still facing the same issue, please uninstall and reinstall the printer drivers and check for the issue.

  Also, please mention what operating system are you using?

  Let me know if it helps.

  ~ UL

• How to lock the menu and the task bars to make them visible?

  How to lock the menu and the task bars to make them visible? Reset tool bar does not stop to read the page to cover everything up. I have the latest player of version 10.4

  10.1.13 reader update

  Update Kaspersky to 15.0.1.415ab

• How can I bypass password and the Welcome screen on windows 7?

  starting with W 7, I get an error of soul and user password. When I click ok I have 2 icons with a request of the users password. If I click ok it goes to the Welcome screen. How can I clean it and go directly to windows without password and home screen?

  There is no error message.  As long as you have two accounts with the listed names so there is no problem.

  - - - - - - - - - -

  If there is nothing wrong with the system, then you can go directly to any account chosen by:

  1 click on the Start button and in the search box, type netplwiz

  2 right-click on the shortcut resulting & select run as administrator.

  3 in netplwiz dialog box, check the option "users must enter a user name and password to use this computer". Select the user account Standard that you want to connect automatically by clicking on the account you want to highlight, and then click apply. Enter the password for this user account (when it exists) when you are prompted, or leave blank if there is no password.  Then, return to the dialog netplwiz new & still having that same account selected, uncheck "users must enter a user name and password to use this computer" then click OK.

  - - - - - - - -

  I do not pretend to create 2 accounts and more admin accounts that you use for day-to-day operations. It is a useful protection against the corruption of the user profiles.  No matter what profile can become corrupt and if that is the only admin account that you suddenly find you have serious problems. Operation with two spare admins [which serve just to allow tasks like facilities] protects these two accounts safe against the risk of corruption of the profile day and ensures that you will have access to the system if your normal accounts is screwed up.

• I have to wait about 5 minutes between loading time and the Welcome screen

  Need me quite a long time to wait I'm not why. It worked normally until I installed a new type of explore (7.0) from the Internet, after that I restarted my computer, I have to wait about 5 minutes to see the Welcome screen. Can someone help me, thanks

  Hello

  It is not easy to say why this happen here. I recommend you to visit the FAQ section of the official website of Microsoft. Maybe you will find something interesting.

  I heard that IE 7.0 has own firewall and it is possible that there are some conflicts with the firewall of Windows XP Home edition. Check it out and try to disable the firewall of Windows XP Home edition to see if the operating system boots faster.

  Good bye

• The start menu and the task balk disappeared

  On my windows XP the task and menu balk start screen disappeared as a result of a mouse click. "Just the icons on the side right.<" remained.="" what="" should="" i="" do="" to="" get="" the="" balk="" back?="" any="" help="" will="" be="">

  Hi janavasiljev,
   
  This problem can occur for the following reasons:
  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.
  • The core files are damaged.
  • The Explorer.exe file does not load at startup.

  Make sure that the hide option automatically is not selected for the taskbar and Start Menu Properties.

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  For more information, see:

  Start menu and taskbar Windows are missing after you upgrade to Windows XP

• HP Start Menu and the desktop icons for HP printer Diagnostic tools

  Hello world

  I have a HP Desktop F4440 all-in-one printer and I use the Windows XP operating system. I have all the scanning software and others installed from the original HP installation disk or updates from the HP Web site for this printer. Everything works very well at the moment, but there is a small problem. The HP icon shortcuts for the Menu start-up and functions for the printer changed to a generic icon at a time given to these two places after the software installation CD was used by me to install the printer programs or desktop icon HP to utilities "Diagnostic Tools HP printer" original. It works fine otherwise, when I want to go check something on the Tools of diagnosis HP printer or HP Solution Center, but the HP icon changed to a generic at a time for a reason unknown, inexplicable. I don't have no changes to my system until the problem occurred to my knowledge other casual upgrade for the operating system or install a new windows update or HP software updates or restart the computer, but some schooner point after one of these upgrades, HP put to date or restart the HP start menu and desktop icons time replaced by a generic.

  Can someone tell me how I can recover the original HP icon and get her back Amendment? It was an icon on the web since the HP printer Diagnostics utility or function is based on the web. Is there a way I can save a copy of just the file on my computer icon so that if it goes back to that generic again once I can more easily change what it is supposed to be? I thank very you much for your help and advice.

  Hi there yoseph13,

  What has happened to me too, but after a windows update. Half the icons on my desktop have been affected. I hope that this fix works for you as well. Right-click on the icon. Go to properties. Click Change icon. Select the icon and click ok then apply and ok again. If the icon does not appear, you will need to navigate to the folder of the software and select the application.

  Good luck!

• Is it possible to change the start menu and the commands in English?

  I bought a computer (Dell) of France with windows 7 Home premium, with a

  all orders and start menu are in french.
  Is it possible to change the language of the computer (not the language of the keyboard), I mean start menu and commands (copy, paste, new folder...) to the English language?

  I bought a computer (Dell) of France with windows 7 Home premium, with a

  all orders and start menu are in french.

  Is it possible to change the language of the computer (not the language of the keyboard), I mean start menu and commands (copy, paste, new folder...) to the English language?

  Hello

  I'm sorry for the inconvenience, but I have a simple solution for your problem and get back you on track.
  Simply follow the link below and download the US English Language Pack. (Will be downloaded via Windows Update)
  After it is finished, simply apply the update and you should be good to go.
  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=Win7
  I hope I was able to solve your problem for you today, if you have any other questions or problems or the problem persists please answer that I am more then happy to help you somehow I can.
  Thanks for your time, I hope this has helped.
  -Ian