Windows 0xc00000a5 application error

Similar Questions

• Report Windows 7 Application Error Invalid ID for using the Page 0xffa0 and use 0xa1

  I applied a windows update a few months (through automatic updates) and now I get the error message after any time I restart my laptop.  I have a Dell Studio laptop - about 2 years.  Originally with Vista and later upgraded to Windows 7.  I didn't get this error when I upgraded to Windows 7 - only later after that a windows update has been applied.  I can't get rid of this error message or having any idea it came from.

  Hi JAMA004,

  · Are you able to boot to the desktop?

  · You receive this error on startup?

  · Have you updated all drivers installed on your computer?

  1 check the updates have been installed before the number: see the Windows updates are installed:http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

  2 start the clean boot computer and check if the problem still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Clean boot, helps us know if third-party or applications software is conflicting and causing this problem.

  Make sure that you reset the computer in step 7 normal after that troubleshooting is complete.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Application error memory could not be read 0 x 00000014

  Hello world

  I would like to know if any of you have experienced this problem.

  I run an application built by me in a computer with LabVIEW Run-time 9 in which I display a PDF file using an ActiveX control:

  

  The target computer is running Adobe Reader 9.0.  Everything works perfectly until the application is closed.  From time to time (almost most of the time), I have the following error in windows:

  «Application error: the instruction at "0x0ffd609c" referenced memory at "0 x 00000014".»  The memory could not be "read".  Click OK to complete the program."

  Try to find the reason why, I found a few forums who say that the reason is a bug in Adobe 9.0 (in fact, I tried to run the application with Adobe Reader 8 and I can't make the same mistake).  Someone of you have had this error before and found a solution?  These links were not on LabVIEW and I have no idea how to get around this problem.

  Any help is happy.

  Thanks in advance.

  Dani

  Who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.

  It seems that, somehow, LabVIEW and other programming tools, hang around with this version of Adobe (I guess it is because of this bug) when the reference to closing Adobe created by the ActiveX container.  That the solution will be closing "by hand" this reference, then saying Windows to release the whole relationship between the application (LabVIEW for us) and Adobe.  The idea is that when we did with VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:

  -process all Windows messages currently in the queue of messages (.NET: System.Windows.Form.Application-> DoEvents)
  -run CoFreeUnusedLibraries in "ole32.dll".

  

  I hope this information can help someone, I lost too much time to understand this (eventually find the answer in an Adobe forum!)

  P.S. P.S. for those who program in c#, check out this link; He was my source.

• Internal application error occurred during the opening of Windows Media Player 11.

  an internal application error has occurred
  Is what happens when I try to open or use my windows media player 11 and you're wondering how to fix?

  OT: an inturnal application error has occurred

  Hello

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

• When you use Windows Search error SearchFilterHost.exe - Application error

  When you are using Windows XP (SP3) running Windows Search (4.0), I get the error message:

  SearchFilterHost.exe - Application error

  The instruction at "0x0af609c" referenced memory at "0 x 00000014. The memory could not be "read".

  Click OK to terminate the program

  I do nothing especially when this happens and the disabling or uninstalling this feature is not an option that I and some of the programs that I use it. She repeats every few minutes, but I'm pretty sure it's because the application restarts whenever you "Finish". I also tried to reinstall it but to no avail. Thanks in advance for any help.

  These errors appear when the index database is corrupted, for example during the crash, etc. The solution is, except disabling or removing the search service, reconstruction of the index. Just reinstall will not solve the problem, because that does not remove the corrupted index.

  On XP Pro:

  (1) start 'services.msc' and find Windows Search stop.

  My personal advice: check user accounts all records and make sure that the "Application Data" and "Local Settings" directories have their attribute 'Index summary' unchecked, including all files and subfolders. You can avoid many possible future performance issues.

  2) go to c:\Documents and Settings\All Users\Application Data\Microsoft and delete the entire directory "Search" (or just rename / move elsewhere).

  (3) close the session log. Index will rebuild, it may take some time, depending on the amount of documents, music, etc. you have. So be patient with harddisk increased temporary activity. Normally it works with a low priority.

  On Vista/7 Search index is located in \ProgramData\Microsoft, otherwise,'s done it the same way. Unfortunately, I do not know how to avoid the real alteration. XP seems more inclined to him.

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• When you turn my computer to get on the desktop windows stops before and an application error pops up that is described below.

  Lsass.exe - application error

  x application failed if initialize properly (0xc00000005) click on OK to close the application
  the OK button is less

  I tried many ways to restart the F8 advise such items that start windows normally, know last good configuration, safe mode and nothing works.  It happened for about 12 hours.  the computer works fine until what happens... not sure if a virus has infected my computer or not.  When you click OK will appear dark and the mouse works but nothing else is running or change.

  sbdci,
  If you are able to boot mode safe mode with command prompt or start from a XP CD to the recovery console and run the following commands.

  Chkdsk /r

  sfc/scannow

  Also if you go the Support technique Microsoft and search lsass.exe it will give a list of articles on the issue.  There are many elements that interact with this file, then you may want to look at the search results to see if any apply to your situation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to open a session in Windows Marketplace application it keeps giving me the error: 80048821

  Original title: Market game Windows BUG

  It's set up, games for Windows Marketplace has a bug.
  I can't access and I tried two different PCs, a new format.

  The ID and pass are correct, of course (the same that I use in the forum ageofempiresonline, xbox.com, hotmail etc...) but only on games for Windows Marketplace application it keeps giving me the error 80048821.

  It could depend on my e-mail address starts with the letter W, because as soon as I started writing the field is automatically filled with the text "Windows Live ID"... I guess.

  Please help me!

  Forgive my English, I'm Italian (google traslator ).

  Hello

  I suggest you to contact Xbox support, because they are professionally trained on Xbox issues they can help you better with this problem.

• Error: Windows defender Application is not found

  Original title: application not found error

  I have windows vista.  I get an error message cannot find windows defender application.  someone uninstalled and I can't reinstall.  I always get the message that it is already installed on vista.  How to solve this

  If you do not have one of these security programs installed, try this method to start Windows Defender:

  AutoScan - in the search box, type Services - press the Enter key.
  Scroll down and click on Windows Defender
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it does not say that, right click on Windows Defender - click Properties-
  in the Startup Type section, click on the pointer, and then select Auto
  to the service status, click Start
  Click OK

  t-4-2

• Windows 7 WerFault.exe & wermgr.exe Application error

  After recently reinstall Win7 Windows Vista (which has been installed on Windows XP) on my computer began spewing WerFault.exe and wermgr.exe application errors

  I tried everything I installed AVG and scanned it returned without flaws but it becomes serious when I try to download or use automatic updates it Kicks me out or does not apply the changes I made

  "I tried Safe Mode and it does not work and when I ask new programs to install as Windows fixit he returns with an error.

  Extended attributes are incompatible"I'm about to give up with the computer if there is anything I can do please reply with MI awnser about to stop trying

  Hi Alex,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message.

  This could be due to corruption of system files.

  Try the methods.

  Method 1:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a security tool free that provides analysis on demand and helps remove viruses, spyware and other malicious software. It works with your current Antivirus software. See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Dllhost.exe - application error windows 7 what happens if upgrading to Windows 10

  After a power failure that I realized when power has been restored that my computer had been left there on before the failure - 3 days now I get a dllhost.exe - application error message.   I have not installed any new programs or updated everything I know before the current problem.  My question is if I download the new Windows 10 will be cela correct/fix problem dllhost.exe - my computer currently the s running on Windows 7

  I suggest that you enable restoring the system so that it is available the next time that you need.  Note that the system restore must be enabled on the operating system drive, there is no need to enable restoring the system on disks.

  Regarding the dllhost.exe - application error message I suggest that you run a Malwarebytes and a TDSSKiller scan on the machine.  If these find no parasites, then don't look at the registry of the possible clues, this error can be caused by any software installed on the computer.

  These can be useful:

  HTG explains: what Windows Event Viewer is and how you can use

  How to open and use the event viewer in Windows 7

  John

• Windows Application error

  the instruction at 0x770bd33d referenced memory at 0 x 31303137. The memory could not be read.  Now, I have no idea what is causing the problem. Please help me how to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

  http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

  http://wiki.answers.com/Q/What_causes_the_error _ 'The_instruction_at_address_referenced_memory_at_address_The_memory_could_not_be_read' _and_how_do_you_fix_it

  Click on these links for possible solutions to your problem.

  Also, check out the related discussions, below your question.

• Application error (Windows can check online Solution)

  I m using windows 7 Professional 32 bit, I always come continiously Application error error come then my whole application closes automatically and display windows can check online the soluations please help me...

  Hello

  1. when exactly you will get the application error message (while starting the computer or by using any application)?

  2. no special software, you will get the error message?

  3. have you made changes on the computer before this problem?

  4. you receive an error code? What is the exact full error message?

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.