Windows 10 Info Center is boring!

Similar Questions

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• Xbox 360 and Windows XP Media Center Edition 2005

  Hello

  Hoping to get help with this, because I searched everywhere and had not found an answer.  All the work around the items, reference Windows 7 and 8 not XP my Dell Dimension C521 shipped with Windows XP Media Center Edition 2005 pre installed.  I've upgraded to SP3 of XP.  A friend of mine gave me his old Xbox 360 (bought a new unit).  When I try to connect to the XBox 360 I get an error message in media library "uninstall the update for media center 2005 and then re-install the update of the site Web of Windows update.  Then, re-run Setup for Xbox 360'

  I checked in my under settinds program control panel, but don't see any element for Media Center 2005, even with show checked all of the updates.  I don't see Media player listed and 2 updates for it.  I have disabled the Windows Firewall did not help.  The Xbox 360 test shows that I can connect to the internet, Xbox Live (no NAT problems) and PC running Media Center.  It fails on the media center connection test.

  I don't want to reinstall all of the Dell backup image software supplied with the camera, I'll have to back up and start over.  Any help is welcome!

  Thank you

  Matt

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  I suggest for the link and follow the steps in the article:
   
  Error message when you try to install a program for the Xbox 360 Media Center Extender in Windows XP Media Center Edition 2005 with Service Pack 3: "There is a problem with the installation of Windows XP Media Center Edition 2005"
  http://support.Microsoft.com/kb/954622?WA=wsignin1.0
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.
   
  Also see Help links:
  Turn your Xbox into Windows Media Center Extender
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Extender-for-Xbox
   
  http://support.Microsoft.com/ph/7024
   
  Windows Media Center on the Xbox 360
  http://support.Xbox.com/en-us/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Info
   
  I hope this helps.

• Windows xp media center SP3

  1. How can I find What Edition is my windows xp Media Center

  2. How can I find what rollup I have

  3 edition / Version mean the same thing ?

  In order to download updates from the microsoft site I downloaded

  SP3 for IT PRO  I think that some updates are only for SA Pro

  and also settle on my pc, how do I know that updates do not to install

  4. is there a way to install the correct sp3

  5. firewall Windows turns off and onn it self How can I avoid that these, or

  How to know what causes these

  1. go to start, right click on my computer and choose Properties, your operating system and version will be on the general tab.

  2. go to start, Control Panel, add/remove, keep an eye on the top is checked to show updates, but what rollup looking to what program or one application, please be more specific.

  3 Media Center Edition is the operating system not the version name.

  4. If sp3 is not installed through Microsoft Update, download, because it's good to download, just ignore that it is for a COMPUTER technician.

  5 depends on, what is your current antivirus? You have another firewall installed? Are you infected?

  6. make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  7. click on start, run and in the type box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  After back with the results of the analyses and responses to above information.

  8. all updates will be correct if you go to Microsoft Update and do a scan of high priority, then you can do a custom scan and install the rootkit under optional updates updates. Do not download updates of material under option, if you need to update a driver go to the manufacturer's Web site.

• Why do my window media work center must you have windows 7?

  I paid for the full version of windows media center. Now, all I get is disabled and unable to launch application. Doesn't seem fair. All I get is info on the 7.Not... right from windows. Explain.

  Hello Aly

  Not sure if you need help with window or Media Center, but you can try the following steps.
  For Windows:
  Scan of the SFC
  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
  At the command prompt, type sfc/scannow and press ENTER.
  Once the scan is complete, restart the computer so that the changes take effect.
  Windows Media Center:
  Reset the WMC
  1. open the control panel configuration/programs and features.
  2. click on "Turn Windows features on or off" in the left pane.
  3. expand "Multimedia functions", uncheck 'Windows Media Player '. Click 'Yes' to continue and click OK to exit. Then restart.

• INSTALLED 'Windows Mobile Device Center' always have this lack bluetooth perirpheral driver

  I have a Dell 7720 runing WIN 7-64 bit with an android HTC6435lvw DNA 4.1.1 version

  It seems nevertheless to see the laptop and has paired with the phone.  I found the pc on the phone! both are unhiden and paiared...  Dell safe@Office for bluetooth is installed... After both matching, Windows appears, asked me if I would like to ask the play buttons blue tooth for music that is on the phone... I clicked Yes... works great!

  In the Manager device theres a driver missing...?  Is the bluetooth device?  I happened to see which driver he was looking for!...  Yet, after doing a reboot (to see if it's what it takes)... I can't find this DRIVER info now... I downlaoed and won in the ' Windows Mobile Device Center ' for win7 64-bit, and I installed it... Yet the pilot missing again! so I said to the driver for the htc phone and the pilot of ' Windows Mobile Device Center ' guess what? There still playback, its lack a driver?

  Dose anyone have clues to explain why this is?  Is there something more I CAN do? Even if its too yellow! say its lack a driver... the phone AND pc pairing works as it should... Laptop parts my music I can send a files get both phone n pc... Still not with the ' Windows Mobile Device Center ' I turn on nothing happens at all, advances said disconacted... I can play with the settings, it's that...  Back, someone DID it no clue as to why I still see yellow driver missing in Windows Device Manager?

  TY for all those of you who has TAEKN THE TIME to read this...  Those who meet

  GOD BLESS...   PEACE TO ALL! ..............

  HANK K CHALMERS

  Hi Hank,

  Thanks for the detailed description of the issue.

  This error can occur if you do not have an installed device driver or if you have a device driver obsolete for your Bluetooth device.

  Method 1:

  I suggest for the link and follow the steps and the other links given in the article.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  http://support.Microsoft.com/kb/2654568#appliesTo

  Method 2:

  Uninstall and reinstall the device drivers. To do this, follow these steps:

  a. click on Start

  b. Manager type of devices in the Search box and press ENTER.

  c. click continue. The Device Manager dialog box appears.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in the list of types of devices, right click from device, and then click Properties.

  e. click on the driver tab.

  f. click on Uninstall.

  g. click OK.

  h. restart the computer that automatically reinstalls the drivers.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Satellite P100-426: Windows Mobile Device Center cannot find my BT device

  Hello

  Why Windows Mobile Device Center can't find my device Bluetooth (although that my bluetooth works properly)? I have a Toshiba Satellite P100-426, with a built in Bluetooth device

  Sascha

  Make sure that your Bluetooth device is "discoverable."
  The following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  offers you a document entitled:
  "Synchronization via Bluetooth (Vista WindowsMobileDeviceCenter - WindowsMobile 5).
  which is maybe useful for you.

• Windows XP Media Center 2005 cannot connect to the Internet

  Dear all,

  I'm having a problem with Windows XP Media Center 2005. The problem is that when I connect the cable from the modem to the laptop, I only send packets without receiving. The IP address I get is also 169.254.207.207, which is not a valid IP address to connect to the internet, and so I guess that something is blocking the laptop to get the IP address. Another thing I noticed is that when I turned off the modem and restart it, I have connectivity maybe 5 seconds and then return to no connectivity.

  You guys can tell me what is the problem, and if I have to download something but in addition to the internet so that I can get my laptop to work. That said, I can connect to wireless with no problems.

  Thanks for your help and your time

  Martyna

  Hello

  Sorry for the question but what modem did you mean?
  A simple analog modem or DSL (broadband) modem that supports support a LAN connection.
  If you mean the second then I would check the TCP/IP settings in the properties of LAN card. The settings should be set to automatic

  You should also check that you firewall settings.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Toshiba Stack BT + Windows Mobile Device Center

  Greetings!

  Tell me when it will be possible to use the battery of BT from Toshiba with 'Windows Mobile Device Center'?

  Yours, Tim

  Hello

  Toshiba Bluetooth stack is an independent application.
  But who knows, maybe the next version will be compatible, and it might be possible to implement it in Vista Windows Mobile Device Center.
  We'll see

• Problem connecting Bluetooth with Windows Mobile Device Center

  Hello

  I have and HTC Snap with WM 6.1 I want to connect to my Satellite P500 running Windows 7 to be able to move the files by using Windows Mobile Device Center.

  I know that this device can talk to this laptop via bluetooth, because there are some utilities bluetooth Toshiba that I can use to get a connection.

  However, even if the Toshiba utility recognizes my bluetooth device, but WMDC is not. WMDC recognises my device when it is connected with a USB cable.

  I don't know about the drvupdate-amd64 download which I think is necessary with WMDC but when I run what it looks like all it does is try to install a device driver for a device that is 'unknown '. I get a message at the end that driver could not be installed.

  I have run out of ideas on how to get these things to work. Someone at - it a similar experience?

  Could this be a problem of COM port? My Bluetooth device to 40 com affected Toshiba stack I don't see a COM 40 in the WMDC, just a port identified as "Bluetooth" settings

  Post edited by: t5247rb

  Hello

  This page of Toshiba Bluetooth may be able to help you;
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Here are very interesting HowTo documents;
  In your case I recommend that you check the docs:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.

  and

  + How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone +.

  Welcome them

• WIndows Mobile Device Center 6.1 on Satellite P100

  I have Outlook 2007 with Vista on my P100-160 and need to sync with my Mio PDA. It worked well with ActivSync and XP - Pro, but now I have problems to install WMDC.

  The PDA is installed and visible with the Explorer of files and Media Manager, so it's here. I downloaded the x 86 version of WMDC Installer but nothing seems to happen when I run. I can see WMDC on the Control Panel, but it only shows the communication by default user interface when I click it.

  Any advice on how to install this application or this is a problem for others too?

  Hello

  I can't provide a lot of information on this tool, because I m not the owner of a Pocket PC.
  But I studied a bit and found this site from Microsoft.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=46F72DF1-E46A-4A5F-A791-09F07AAA1914&displaylang=en

  The new Windows Mobile Device Center supports devices such as:
  -Windows Mobile 2003
  -Windows Mobile 2003 second edition
  -Windows Mobile 5.0
  -Windows Mobile 5.0 with Messaging and Security Feature Pack
  -Windows Mobile 6
  -Windows Embedded CE 6.0

  If you want to install the Windows Mobile Device Center on Windows Vista:
  1. connect your device to your PC.
  2. Select run this program from its current location, and then click OK.
  3. follow the instructions on the screen.

  Important: Your device must be connected to your PC for Windows Mobile Device Center to run after installation

• Satellite A100: Need drivers for Windows XP Media Center Edition

  Hi there, hoping someone can help me, just bought Windows XP Media Center Edition, had home installed, installed a new and I'm missing some drivers (Ethernet controller, mass storage controller, network controller, PCI device and video controller VGA)

  I have a satellite A100 PSAA9E and I was wondering if there is no driver for this edition of windows yet or if there is no alternative that is pro XP drivers should work?

  Thank you
  Andy.

  Hello

  On this page of Toshiba, you will find drivers for different units.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Win MCE drivers are not available for Satellite A100, only Win XP.
  Jasmin said, you can try to use the Windows XP drivers as the Win MCE is a WinXP with additional features.
  Check it out

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• How can I activate my windows servive Security Center

  It seems that I had a pc problem and she

  Hi silosronnie,

  See the answer in the thread below for a possible solution: http://answers.microsoft.com/en-us/protect/forum/protect_scanning/window-security-service-center-when-i-try-to-turn/a8df5a1f-7b47-e011-a756-78e7d160ad4e.

  I hope this helps.

  Good luck!