Windows 2008 R2 NIC disconnected when converting from a model and started using workflow start-vm in VCO

Similar Questions

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time!

  When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time! I installed the uprgrade and also did a virus check everything seems ok! I need a solution cause mozilla's browser that fits me better!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• How to make all my desktop icons back they have dissappeared from my desktop and start menu

  my desktop icons have disappeared from my desktop and start menu, that I can't right click at all, I have no idea of what happens if someone could please help me that would be great

  Hi Rehman,

  ·         Did you change to the computer?

  ·         What is the antivirus installed on the computer program?

  ·         The start menu is empty?

  ·         Other user accounts have the same problem?

  Check to see if the following is useful.

  Method 1: You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link to do so.

  Microsoft Safety Scanner - free online tool for PC health and safety

  Method 2: Check to see if this article helps you to the question of the desktop icons.

  Your desktop icons are missing in Windows XP

  Method 3: Log on to another user account and check for the issue. If you do not have another user account and then create a and look for the same thing.

• The problem starts just today when I opened my computer and started playing with the no sound

  So, basically, as the title says, my video games sounds is not recognized by my volume mixer. The problem started only today when I opened my computer and started to play with no sound. At first I thought that I had cut all the sounds but then I checked and nothing was cut and I also checked that my volume mixer didn't even have the game volume control bar to increase or decrease the sound of the video game. I also checked my device to update manager, but didn't so I get really worried about it, if you could help me that would be great.

  (PS: If you need information about my computer just ask in the comments and I'll tell you what you need to know.)

  Well, thanks for the time spent by only typing the answer, I really appreciate it, but I already solved... Just had to uninstall my audio driver from Device Manager and reinstall it. But now I have another problem, when I try to open any folder I gives me an error like this: "this file doesn't have any associated program that allows you to perform this action. "Install a program or if you have one, create an association in the-> default programs control panel. I also noticed that when I right click on it, it should say 'Open', but instead he said: "cmd" as the priority order.

  (PS: I know this issue is off-topic but see if you can help me with this one please.)

  PIC:

  

• I just bought a new Lenovo, computer office equipped Windows 10.  In September, I bought Photoshop elements 13 and have used on my old computer with Windows 7...  Can I download this version of photoshop on my new computer windows 10 and wil

  I just bought a new Lenovo, computer office equipped Windows 10.  In September, I bought Photoshop elements 13 and have used on my old computer with Windows 7...  Can I download this version of photoshop on my new computer windows 10, and it'll work?

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Download, install, then enter your serial number.

• I got 15 major updates that neede says windows must be installed. When I tried to install and check the recent update file, almost all of them FAILED. The error message was: Installation failed, error 80072EFE. Any ideas? __

  Failed installation error 80012EFE

  If you are referring to the Security Center window, it isn't what you think it is. See http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Security-Center

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  If you please note that a repair installation (upgrade AKA on-site) will NOT fix it!
  
  See http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Note: When you reinstall Windows, McAfee free trial will be also reinstalled (but not valid, of course). To reinstall your current application of McAfee (purchased), use this three-step correction: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• During an update to Windows Vista, my office has disappeared with the task bar and start menu.

  I can only access my and other programs through the Task Manager.  I have tried troubleshooting, I restore my computer on the eve of what has happened, but nothing helps.  Any ideas?

  Hi cthodges

  Thank you for using the Microsoft Answers Forums!

  I would like to ask you a few questions to help focus in the right direction:

  Are there other specific details that you can provide that will help us understand and solve your problem?

  We can try a few steps and check if it works:

  Run explorer.exe from the Task Manager > new > task. If the start menu reappears, it would confirm the cause.

  We can now perform the following steps:

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2:

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, and the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If it works fine in safe mode, infer you that all third-party programs are causing the problem.

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  S tep 3 :

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  See this link for more information:

  http://support.Microsoft.com/kb/936212

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• vCO workflow: create a virtual machine from a model and then ask the user about the CPU, memory size...

  Hi guys,.

  I am trying to create a workflow with vCO that can do the job for me:

  -Create a virtual machine (or maybe a several virtual machines) from a model (the model is in vCenter, of course)

  -L' user who is running the workflow has the thr right to say what he wants for the CPU, the memorysize, the disksize

  Any help?

  I found some workflows in the library can seem to do something similar to what I want, but since I'm a beginner I'd rather have your advice

  Hello there and welcome to vCenter Orchestrator

  Take a look at this series of tutorials to get an idea of how start:

  Create a vCO simple self-service VM Provisioning Portal - part 1

  Create a vCO simple self-service VM Provisioning Portal - part 2

  Create a Simple Self Service VM Provisioning Portal vCO - part 3

  The general approach to take would be to determine which of the clone (or clone and customize) workflows adapts to your nearest need (see your customer vCO: workflows\Library\vCenter\Virtual Machine management\Clone\)

  Then, create a NEW WORKFLOW that calls this one... after that your clone operation is complete, keep the computer turned off virtual and add feeds of extra work from the library to your new workflow that do things like change the amount of Ram, adds disks, change CPU, etc...

  Be sure to watch the videos on http://www.vmwarelearning.com/orchestrator to get a basic understanding of the use of vCO.

• Satellite L25-S1192: WLan disconnect when moving from router

  I looked in the nets, and I can't find an answer to my exact problem.

  I have a laptop Satellite L25-S1192 and XP running.
  My problem is the Wi - Fi works very well until I'm 10-15 feet away from the router.

  Once I get beyond that point, I lose the connection even if when I display the network connections it shows that I'm still have an excellent signal and always connected. Other laptops work in the House and I did several other tests to rule out the router.
  I updated the driver but nothing seems to help.

  Given that the connection is working near the top which tells me the settings are correct.

  What Miss me?
  Any help is appreciated.

  Hello

  In my view there is nothing wrong.
  The WiFi signal seems to be too low and therefore the WiFi disconnects.

  I think that this happens when you run Notepad with battery operation. Right?

  Well, you can go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi network is set to mode harder

• Variant of the database of data does not not when converting from 2010 to 9 LV

  Hi all

  I have a simple code I made in 2010 LV for the display of the worksheet of MS access data in a table in which I used the tool of DATABASE DATA VARYING. But when I converted this file a LV 9 VI and open in another computer running the wires connecting the tool data terminal with LV 9, SELECT DATA and basic tool of DATA OF DATA VARIANT are broken. Error message is of Type 1: table 2d and type 2 is zero. Open the converted file even in 2010 LV gives no error and works well. Can someone please tell me what can I do to fix this problem.

  Kind regards

  Amine31.

  Amine31,

  The changes that you made in your attached vi is not correct.

  pls the vi attached to find...

• C200 M2 Windows 2008 R2 NIC Teaming question

  I have a c200 M2 Server with a map of map NETWORK Broadcom addon (N2XX-ABPCI01).  I would like to create a NIC team with all 4 cards (2 on board and 2 Broadcom).

  I found the enictool on the CD, but when I run it, it is not announce adapters or teams.

  How can I create a team on this server?

  Thank you

  Dave Harrold

  Hi Dave,.

  Utlities CD/.iso, you can find the BINS utlity for broadcom. This should help you.

  . / Afonso

• Borders of text box 'lost' when converting from word to PDF document

  I am converting a word doc that contains text boxes in PDF using Acrobat Pro XI. When I convert the doc, the borders of text right and left in the text boxes are not displayed.  It is not a zoom problem when I print the pdf, the left and right boxes remain missing. Why am I wasting these borders and how can I get them in my pdf?

  They will not be displayed, unless

  1. You must click on each text box
  2. Go to Format > shape
  3. Click lines
  4. line color chose desired for borders.

  Once the borders by color as they appear in the created PDF files.

• error occurred when converting from pdf to word

  Attempts to convert a PDF file to a Word doc after the upgrade for this ability. Once I hit the "convert" button, a message will appear saying "year error occurred while trying to access the service.

  Is Adobe export as a PDF just downstairs?

  Hello Christina,

  I'm sorry that you get this error. Could you try the following?

  (1) log out of your account and reconnect. Make the same mistake as before?

  (2) connect to the ExportPDF service on the web ( https://cloud.acrobat.com/exportpdf ). You still get the same error if you directly download the PDF file on the Web site and try to export it?

  Concerning

  Sukrit diallo