Windows 7 and 8 automatically creates a GPT, do I still diskpart to create the GPT if so in which situations?

Similar Questions

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• I have a network of offices with windows 7 and XP PC 6 PC 7. Each day network neighborhood loses the xp computers. I can always ping them but they do not appear on the network.

  I have a network of offices with windows 7 and XP PC 6 PC 7. Each day network neighborhood loses the xp computers. I can always ping them but they do not appear on the network. The PC xp always had access to the internet and can still ping windows 7 PC normally, but I can't connect to the shares or see them in the network neighborhood. The question seems to come and go during the day and can be due to the network traffic? I am lost at this point. A reboot of the xp PC is not resolved, but a restart of the server main window file 7 pc solves it for a while. Help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?

  Update should allow you to enter the serial number of the previous version during the installation

  If this does not work, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• Can drop us and then re-create the index when the database is opened.

  Can drop us and then re-create the index when the database is opened.

  Yes, you can.

  Concerning
  Asif Kabir

• I would like to create the same mouse over effect which is used on the homepage of Industrial Light

  I would like to create the same mouse over effect which is used on the page home of Industrial Light & magic site. http://ILM.com

  Could you get it someone please let me know what the code or effect which is used. Thank you.

  It seems that there are two shows running in parallel where a mask that follows the mouse has one of them.  The one you see in the mobile mask is on top of the other.

  If you were to search Google for a custom cursor tutorial you'll probably end up by with most of what it takes to get the mask to follow the mouse.

• Window opens and closes automatically

  I also have the same problem.
  I bought a laptop more than two weeks ago, I turned on and it started downloading the updates for Vista. (I have Vista Home Premium)
  Then when I turned off my laptop, you could see that Vista was installing updates before power off.

  When I restarted the laptop, I have the same problem that jmwmh has.
  Several programs of the control panel will not open, as the update of Windows, user accounts, Parental controls, etc. They open and close automatically.
  I even used the recovery DVD and reinstalled Vista several times, but after some time, the problem returns.

  I even tried to disable Windows Update, because I discovered that it was after an update of Vista that my laptop has gone mad, but STILL it downloads an update and installs it without my permission.

  I have administrator rights, so this isn't the problem...

  Any ideas?

  Donangelus,

  Thank you for using answers.microsoft.com

  My suggestion is to try to create a new user profile and see if the problem occurs in the new profile.

  Here are the steps to create the account.

  • Create a new user profile:
    Follow these steps to create a new account, we can test:
    1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

  Let us know if that fixes the problem or if assistance is needed.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Add features of Windows 8 error "failed to create the restore point.

  Original title: IL SAID AROR MESSAGE CANT CREAT RESTORE POINTWEN I ADD FEATURES

  I WENT TO ADD FEATURES PURCHASED WIN 8 PRO PACK NOW WEN I'LL INSTALL SAYS CANT CREAT RESTORE POINT PLEASE TRY AGAIN

  MARKTRAVIS

  Hi Mark,
   
  I appreciate the efforts that you put to publish the query on this forum.
   
  However, it would be better if you can provide some details related to the query:
  (1) is there a third party security software installed on the computer?
  (2) there the restore points that are created on the computer before this problem?
   
  System Restore automatically recommends the last restore created before a significant change like installing a program point.
   
  To store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new.
   
  You can also follow these steps to increase the memory allocated for the restoration of the system:
  (a) press Windows and Pause Break to open System Properties.
  (b) click on the System Protection option.
  (c) click on each disc.
  (d) click on Configure.
  (e) check if the allocation of memory on each hard disk is allocated.
   
  The settings above, you can also check if there are restore points available on the computer. Click System Restore, and check if you are able to find restore points.
   
  To solve the problem, if you have installed a third-party security software on the computer, I suggest you temporarily disable and check if it solves the problem.
  Important note: Security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Please let us know about the status of this issue.

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• Renstalled Windows XP and installed SP3 now I have no sound I hear static in the speakers but no sound.

  REFERENCE DELL GX60 SFF
  OK hear goes: Windows Xp Home edition, ver.2002 was SP2. Celeron (R) CPU 2.4 GHz intel 2.39 GHz 512 MB RAM
  OK you can stop laughing now. I know its out of date and I know that I will eventually improve windows (getting another computer at the moment), is
  not an option. Now, my relic worked fine good healthy and not too fast, but it got me where I should go. Mainly to pay my bills, print them
  play games, etc.; you get the idea. somehow, well I ended up losing several programs and not knowing what I was done, I decided to reinstall
  Windows XP and also to install SP3 (bad decision!). I didn't know that my copy of resettlement was not installing many drivers, you had to put them
  yourself! Needless to say, I fumbled my way through, but I can not all sounds, oh I get this 'static' loud and clear when I turn the speakers off voltage
  but that's all. I've tried everything. Also, when I go into Device Manager and open sound, video and game controllers, it shows
  Audio codecs, Legacy Audio Drivers, Legacy devices of video Capture, media control and Codecs video (whatever that means).
  And when I opened the system devices, there is a yellow exclamation point in front: Intel (R) E75/25/E7520 DMA controller - 3594. (phew!).
  Well, I hope I gave you enough info.cause, I'm not that knowledgeable about computer technology. (I'm sure it's obvious LOL)  In any case
  Sir/Maam are unwilling to detach "sexist". I'll let you go, hope you can give me help on this issue, if I could I would just get a new one
  but I am living young 71 on S.S. Disibility and simply ends.  Not complaining do not. I am blessed. You have a wonderful and blessed
  day.
  Sincerely yours
  Mrs. Fannie M. Owens

  Go to your computer manufacturer's support web site and search for drivers of devices in Windows XP for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• I bought Windows 7, and in order to upgrade from Vista to 7 I need to install vista service pack 1, which i'm going to have done wrong. I have already searched the web and tried possible solutions, I found.

  When I try to install service pack 1 to automatic updates, it will download then during installation, it will get and 80 d error code. When I try to manually install the service pack 1 of online, I save the file to the desktop and run it as administrator and it will start to install, but after a few minutes, bad get the error code: 0x800F080D

  Hi smithj2768,

  Thanks for posting. Please try to install the service pack in a clean boot.

  Perform a clean boot on the inorder of the computer to ensure that all third-party software services are temporarily stopped, that may conflict with the installation of Vista SP2
  To perform a clean boot, follow these steps:

  1. Click Start, click Run, type msconfig then to open, and then press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm updating my windows defender and I installed mse or norton, but is not install what is the reason behined it

  When I update windows at this point that I uninstall norton and after uninstalling it I updated windows defender and after one day, when I want to install microsoft security essential, then it installs but it is not updatable. I want the reason

  If you install MSE, norton or any other program that provides a real-time protection, windows Defender must be turned off.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  The reason is that you want only one program installed and active on your system that offers protection in real time as two or more can cause conflicts and slowing down your system.

  Say for examle you picked up a well known spyware, and you had both windows defender and MSE running, they would both try and catch it and this would lead to a variety of problems.

  The best would be to install a good antivirus software and turn off and ignore the windows Defender

  * Note that the same streets of wanting 1 also applies to firewalls.  If you choose to intall norton, and the version you install has its own firewall you want to disable the windows firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Good luck

  Chris

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox