Windows 7 disk expansion problem

Similar Questions

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Serious teething problems (problems of ubuntu-windows, hard disk problems boot loader)

  I have a laptop ASUS K50IN with recovery partition windows preinstalled on the hard disk (Windows 7, Home Premium edition, 64 - bit).

  I formatted the entire hard drive with Lubuntu installation dvd, I used Lubuntu, for a few weeks with success.
  (I used a removable drive for installation.)
  After that, I wanted to do a dual-boot system (windows-ubuntu).
  I deleted the windows install Summary Lubuntu with recovery partition, so I downloaded a version of Windows 7 Home Premium 64 - bit and burned to dvd (I have my product key from the back of the machine). Downloaded from: msft.digitalrivercontent.net.
  I deleted the partitions lubuntu until windows install with windows dvd, made a partition for windows (with the 100 MB system reserved required),
  and began the installation process which took place successfully, but it failed to restart after the installation. As much as I remember came problems.
  I had a few bad boots, but I managed to run the new windows 7, made some configurations, programs installed on it. I always have problems with reboots. (It was stable when I have manged to get into windows itself.)
  I searched the net and found that ubuntu uses grab as boot loader, and it isn't getting deleted with the simple formatting even with a windows installation.
  I tried to repair the boot loader of windows to the Master Boot Record by running the command from the windows installation disk prompt (many tries to start).
  I tried these commands unsuccessfully:
  /fixmbr Bootrec.exe,
  /FixBoot Bootrec.exe,
  /RebuildBcd Bootrec.exe,

  (by the way these commands responded succession of repair)

  Bootsect/nt60 SYS/MBR,
  list not found no operating system compatible hits.

  (Auto repair could not fix problem.)

  Then I used DBAN to completely wipe my drive.
  I used the values in interactive mode (PRNG:mersenne twister, method: DoD short, collar to check: last).
  Ran for 9 hours, crushed 3 times, has completed successfully without errors.
  I read that it removes the MBR sector too.
  I tried to start the windows installation disc, and it shut my computer when it arrives at the end of the second bar with "WINDOWS IS LOADING of FILES.
  Same problem with the installation of ubuntu dvd.

  Same problem with the DBAN disk.

  Same problem when booting from the hard drive.

  Keeps turning itself off in unpredictable ways. Sometimes, I managed to get in installation disc menus, then comes the turn off.

  Above all it stops early in the boot process.

  Hello fatou,.

  Thank you for giving us the opportunity to help you. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  As you have tried almost all the troubleshooting steps, and if the problem persists always try to follow the provided suggestion in the following documentation of Ubuntu and see if it helps.

  WindowsDualBoot .

  You can also consult the steps described in the following Microsoft article and see if it helps.

  Install multiple operating systems

  If the problem persists, I ask come you into contact with the your computer manufacturer (ASUS().

  Keep us updated on the issue and we will be happy to help you if necessary.

  Kind regards.

• Satellite L305D-S5892 - Windows has encountered a problem

  Hello

  I have an I have a Toshiba-L305D-S5892
  With Vista Home Prem 32

  I have a few problems and am currently blocked.

  Each problem below, is a problem that I met after taking a few steps.

  * The 1st problem *.

  A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
  When my computer back on, I received this message:

  Windows has encountered a problem communicating with a device connected to your computer.

  This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Windows\system32\winload.exe

  Status: 0xc00000e9

  Info: An unexpected I / 0 error has occurred.

  I didn't have any usb device or removable in media.
  I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

  * 2nd problem *.

  I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

  PXE - E61: Media test failure, check cable.

  PXE - M0F: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  * 3rd problem *.

  I downloaded the NEOSMART repair Cd.

  Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

  I'm confused... any help?

  Hello

  For me, it looks like a problem with the system eventually installed the HDD failures.
  Why?

  Due to the issue described in point 2.
  PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
  This happens especially if the HARD drive was not recognized by the BIOS.

  My recommendation;
  Access the BIOS and check if the HARD drive is listed there.
  If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

  If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
  If you have no recovery disc, then you can order it here.
  (I guess it's a Toshiba laptop model we)
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  Good luck

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• P2-1120: Windows repair disk

  My computer Windows 7 needs a repair disk to initialize, but I can't do the him since he cannot start... My other computer is a windows 10 and I wonder if a repair made a computer disc windows 10, be compatible with a Windows 7?

  OneOneWorld

  Hello;

  Let me welcome you on the HP forums!

  I read your post about needing a Windows repair disk and wanted to help.

  Sorry, but from what I remember, the Win10 option is to create a recovery disc - and is supposed to be written on a USB key.

  If your Win7 PC can boot on USB, you can give it a try.

  But if it does not, the ISO file to create a repair CD Win7 can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

  When you download this file, it will be an ISO file.

  To make a CD bootable it, you will need to download and install ImgBurn.  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

  To make a USB bootable of it, you will need to download and install RUFUS.  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.

  Then the media start and run Startup Repair three times - that's right, three times - as it takes three passes to repair all files of the boot loader.

  IF it works, when you delete the media and reboot, you should then start a Windows desktop computer.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95

  original title: Space cadet 3D pinball

  Pinball Space cadet is not not available for windows 7. is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95. I have a relevant disc that I purchased when using XP (and seriouly consider replace Windowsd 7 with). If it is possible, are there problems to download it.

  Try this: http://mspinball.weebly.com/download.html. He was installing a short test, and it works (download and installation may alert you to "Unknown Publisher", but various analyses did not find anything harmful). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Windows has encountered a problem, try to copy a file... why?

  Windows has encountered a problem, try to copy a file... why?  MikeW

  There are many possible reasons.  What you have tried to do over time?  Is there additional information printed with this message?  A few possible reasons come to mind:

  • The file was opened exclusively by the operating system or another program
  • The full path to the file from the C:\... contain more than 256 characters
  • Permissions problem: you have read permissions for the file or permission in writing to the destination
  • The file entry or damaged directory disk sector. (Run the command chkdsk with the /R option to this address)
  • The file is larger than 4 GB and you try to copy it to a disk formatted with a FAT file system.

  I'm sure that there are more reasons, but need more information.

  HTH,
  JW

• A message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c

  Hello

  How to solve the problem of my computer with this message Windows - no disk Exception Processing Message c0000013 parameters 75b6bf9c 4 75b6bf9c. It appears everytimes I start running my computer.
  After a few minutes work on my pc that these messages is displayed. clicking on it after about 5 - 6 times makes it disappear for another 2 minutes, until it again...
  Thanks in advance

  Mark

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  Windows no. disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6b7c

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• calculator will not Windows XP disk load

  Cannot find the calculator.  He disappeared.  Impossible to find in my computer Calc.exe.  It does load my Windows XP disk.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747

  Method 2: Insert the disc of Windows XP operating in the drive and follow the steps below.
  a. go to control panel. Now, go to add/remove programs, click Add/Remove Windows components.
  b. click Accessories and utilities and then click on the button below:
  c. now, click Accessories, and click the Details button again. Now make sure to check the box of the calculator.
  d. follow the instructions on the screen.

  For your reference: The accessories program group is not displayed on the menu all programs in Windows XP: http://support.microsoft.com/?kbid=891893

  Hope this information is useful.

• "Windows - no disk" error message c0000013

  Original title: Error Message "Windows - No disk".

  I get an error message titled "Windows - no disk".

  The text says "Exception processing message c0000013 parameters 75b6bf7c 75b6bf7c 75b6bf7c" it gives me options to Cancel, try again or continue.

  The only way I can get rid of it is by clicking on continue exactly 17 times, it disappears, and then it reappears in about a minute.  Any ideas anyone?

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:
  http://support.Microsoft.com/kb/124873

• Windows XP - error Windows-No disk but only when a disc is in the drive...

  I get this only when im trying to use a drive, it was working at does very well and ive tried everything I can think of, but nothing works...

  It is of the complete error:
  Windows - no disk
  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Everyone please PLEASE please help...

  Thank you very much...

  Hello Sweetlilwolf,

  Thank you for visiting the Microsoft answers community.

  I found another thread discussing this issue. Please take a look at this and there is information that has helped other people with the same problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/696fae8f-462F-4e08-8315-1dadc38f02f9

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• When do the computer it says Windows no disk, Exception processing message and then gives the number.

  When I connect to my computer, I get this box and it says ' windows no disk, exception processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c "downstairs if said"try to cancel still continue"I have cancel us or X out of the box, but you have to do 10 to 20 times to go down.  So when you go on the internet, it did the same thing.  I want to know what it means and how to get rid of.  Help, please.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.