Windows 7 extracted one unexpectedly closes. Problem event: BlueScreen, BCCode: 9f__
almost every day when I wake up in the morning I receive a message saying that my computer has suffered from an unexpected shutdown, and he asks me how I want to start windows 7 (i.e. normal or safe mode). It doesn't matter if I have programs that are running or not, or if I have an external hard drive connected or not. When I get on the desktop I get this same notification but with the check for problem solutions. I press the button more detail and I get this:
You have all devices IEEE 1394 connected to PC?
http://support.Microsoft.com/kb/929762
Tags: Windows
Similar Questions
-
When I try to turn on the computer it gives me a message of startup repair. There are a few problem signatures read like this
The problem StartupRepairOffline event name
Hi GwenBenson,
1 have you tried running the Startup Repair tool?
2. when the problem started?
3. did you of recent changes to the computer?
4. are you able to boot in safe mode?
Method 1:
Step 1: You can check if you can boot into safe mode.
Start your computer in safe mode
Step 2:
If you can boot into safe mode without any problem, then you can try to perform a restore of the system to a restore point before you have been affected by the problem and check.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Method 2:
Alternatively, you can try using the last known good configuration and check. It's a Windows startup option that uses the most recent system settings that worked correctly.
For more information, you can consult the following article:
Using the last good known Configuration
Hope this information is useful.
-
Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen
Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.
Hi slopchop
In the last few days have installed new programs? Or Anti Virus?
Try the steps in this link and check:
http://support.Microsoft.com/kb/958233
http://support.Microsoft.com/kb/925810
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Media Player has encountered a problem and needs to close, heartbreaking.
Recently, while ripping the cd to Windows Media Player 11 on XP Service Pack 3, I'm frequently getting the message "Windows Media Player has encountered a problem and needs to close." It happens usually during the second or third disc. I then close and reopen and am immediately able to rip the CD. Sometimes the player will immediately be closed as soon as I click on "start rip." Any ideas?
The same thing happens if you rip to MP3 or WMA?
Post here the technical details of the accident. Go to Start- run , type eventvwr.msc , and then press ENTER.
In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.
Tim Baets
http://www.BM-productions.TK -
my laptop freeze everytime I try to copy files from one disk to another, and here is the problem report
Problem event name: AppHangB1Application name: Explorer.EXEApplication version: 6.0.6002.18005Application timestamp: 49e01da5Hang Signature: e36fHang the Type: 4The system version: 6.0.6002.2.2.0.768.3Locale ID: 2057Signing of additional blocking 1: 84a74b2e2362b73156ffd8ce815ab7deSignature of blocking additional 2:0433Signing of additional blocking 3: 7ac408085f85bc7b4993b6de39385374Signing of additional blocking 4: ef2cSigning of additional blocking 5: 7192d5cf15e616a12e2e559236f7057dSigning of additional blocking 6: a5d3Signing of additional blocking 7: 9338adb319feac4f0ba33134abc2bfbcOriginal title: problem event name: AppHangB1 application name: Explorer.EXEHello
1 did you change on your computer before this problem?
2. this problem occur when copying all the files?
3. you try to copy files to an external drive?
You can check if the problem exists in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
See also:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
(For Windows Vista)
-
Frequent unexpected stops in the middle of sessions. Problem event name is BlueScreen. This problem is related to the Service Pack 2.0.
Hi Mir,
1. do you get an error with the Blue Screen Error of death (BSOD) code?
2. When you get this error message?I suggest you to follow the steps and check if it helps.
Method 1: Follow the steps in the link and check if that helps.
http://support.Microsoft.com/kb/958233Method 2: You can also check out the link and check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Note: This link is also applicable to Windows Vista.
Method 3: Check related error in the observer of events and after return.
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
-
Here's the report:
Product
WindowsProblem
Stop unexpectedlyDate
27/09/2011-17:09Status
Report sentSignature of the problem
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)
Mini092711 - 02.dmp
SysData. XML
Version.txtAdditional information about the problem
BCCode: 1a
BCP1: 00003452
BCP2: 01E00000
BCP3: C0804E3C
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Information about the server: 02b90325-ac00-4e3a-a3e9-f7c52c8db49eHi DannyDL,
- Did you the latest changes on the computer?
- You have security software installed on the computer?
- You are able to boot into Windows after the blue screen?
Method 1
I suggest you temporary disable the security software installed on the computer and check if you receive blue screen when you turn on system restore.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Method 2
If the previous step fails, then please refer to the article below and check if that helps.
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
-
Windows Media Player is unable to extract one or more tracks from the CD.
I also got this message "Windows Media Player is unable to extract one or more tracks from the CD" pop up in an attempt to 'Copy' the CD! I have Windows 7 and had NO problem for several weeks, ripping my music from CD sales in my MUSIC folder. I got all "parameters" laid so that whenever I inserted a new CD he automatically pulled and then ejected. I had NOT brought any changes to settings but for some reason all of a sudden it doesn't work anymore?
I have trried restart, check all the parameters according to your advice making SURE that all the files of 'Target' were correct (they are), but all that happens is a few seconds after I insert a CD it gives me this message (Windows Media Player cannot extract one or more tracks from the CD.) and then the CD will eject with NO of TEAR that occur? It's VERY frustrating! There, can anyone help? Please? I have NO idea where to check then!
Hi Jetlag40,Follow the steps mentioned in the reference link below and check if it works.http://social.answers.Microsoft.com/forums/en-us/w7music/thread/93c279f7-89ae-4a7c-B7EA-fdc7785ed335Thank you, and in what concerns:
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think. -
I put the CD in the drive, choose "RIP CD" in widow Media Player, but the following message is displayed.
"Windows Media Player cannot extract one or more tracks from the CD."
What do do now?
Hanna,
Please contact the Microsoft Community.
I wish that you look at the answers in these discussions-
We know if this helps you solve the problem.
-
Get the error message saying that Windows Media Player is unable to extract one or more tracks of CD
Hi, I'm trying to copy a few tracks from a cd, but the computer rejects the cd saying that windows media player is unable to extract one or more tracks of cd.
Hello
Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get an error message "theWindows Media Player can not extract one or more tracks of CD". We will analyze and identify the cause of the problem.
Method 1:
You can run the fix provided in the link and check out them.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
Method 2:
You can also try the steps and check.a. open Windows Media Player.
b. click on tools-> Options.
c. tab extract, uncheck "copy protect music".
Method 3:
You can also change the Rip settings and check if it helps.Change settings for ripping
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
More information on:Extract music from a CD
http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CDYou can also try the steps given by Shinmila: March 25, 2010 and check if this may help:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/CD-wont-RIP-using-Windows-Media-Player-in-Windows/96afeb65-4A6D-4559-AF83-c9b52e42a938Hope this information helps. Please reply with the status so that we can help you. -
Receive the message error "Windows Media Player cannot extract one or more tracks from the CD"
Original title: Windows Media Player 12 in Windows 8 - will not tear, will not allow rip parameter changes
Recently started Windows Media Player displays this error message when I tried to rip CDs: "Windows Media Player cannot extract one or more tracks from the CD." When I checked the rip settings, I found that no location has been chosen, even if I had chosen a location when I first set up WMP over a year ago. When I clicked on the "Change location" button, nothing happened, so I'm not able to choose a file location. I downloaded and Fix It (http://support.microsoft.com/mats/windows-media-player-diagnostic-Windows-8/en-us) from Microsoft allows WMP and the library, hoping this would solve the problem, but the problem persists. After that, I also found that none of the rip settings can be changed, not only the location of the file. I get an error message that "ripping settings could not be applied" when I try to change anything on the tab music Rip under Options. I found a support of forum responses that mention a registry fix but does not provide any details on how to achieve this. Any ideas would be greatly appreciated.
Hello
Were there any changes (hardware or software) to the computer before the show?
Ripping allows you to put the titles of your audio CD on your PC. When you rip the tracks, they become digital files on your PC.
There are two places in the Player library where you can customize your settings and better to make ripping work:
In the Rip settings menu (with less choice customization).
In the Options dialog box (with several choices of customization).
Method 1: run the tool library, Windows Media Player and Windows Media Player settings and check if the extraction is possible.
Step 1:
a: press the logo Windows + O to open the search box.
b: Type Troubleshooting, press ENTER.c: now, click on programs.
d: and then click Windows Media Player library.
Step 2:
a: press the logo Windows + O to open the search box.
b: Type Troubleshooting, press ENTER.c: now, click on programs.
d: and then click Windows Media settings.
Method 2: Perform the steps from the link below and see if it helps.
http://Windows.Microsoft.com/en-us/Windows-8/change-settings-for-ripping-music
Answer please if you have any questions.
-
All ripping music CD's, I started advice came saying "Windows Media Player cannot extract one or more tracks on the CD", not allowing not rip me all traces on any CD since it first appeared! I had already ripped off several before CD what happens without any problem, now nothing... Always play the CD no worries, won't just rip, anyone got an answer to this problem?
Hello
Were there any changes made on the computer before the show?
I suggest you to refer to article and change the settings for ripping:
Change settings for ripping
http://Windows.Microsoft.com/en-in/Windows-8/change-settings-for-ripping-music
Let us know if it helps.
-
Windows Media Player - the problem event name: BEX
Hi meet Microsoft
I have Windows 7 Ultimate 32 bit
I tried to read an AVI on Windows Media Player, but I get an error saying that Windows media that Layer has stopped working.
Here are the details of the problem
Signature of the problem:
Problem event name: BEX
Application name: wmplayer.exe
Application version: 12.0.7600.16667
Application timestamp: 4c7dc5a1
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 07951710
Exception code: c0000005
Exception data: 00000008
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789Help, please
Thank you
OK, I might have already solved my problem. I tried only to open AVI justONE file. I have other AVI files and then I tried to open WMPlayer worked. I did the AVI WMPlayer could not play. I checked this with VLC player AVI fiel, and showed what VLC was weird. I guess that the AVI file has been corrupted.
Thanks for your help though, especially this program MalwareBytes.
-
I get this error when you use the internet, the blue screen and it restarts. I checked and recontroler drivers please help.
Thank you
> Signing of the problem:
> Problem event name: BlueScreen
> OS Version: 6.1.7600.2.0.0.768.11
> Locale ID: 1033
>
> More information about the problem:
> BCCode: 19
> BCP1: 00000020
> BCP2: FDE42558
> BCP3: FDE42588
> BCP4: 4A0600AB
> OS Version: 6_1_7600
> Service Pack: 0_0
> Product: 768_1
>
> Files helping to describe the problem:
> C:\Windows\Minidump\090610-26566-01.dmp
> C:\Windows\Temp\WER-33384-0.sysdata.xml
>
> Read our online privacy statement:
> http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
>
> If the online privacy statement is not available, please read our privacy
> Statement offline:
> C:\windows\system32\en-US\erofflps.txt
>The minidump files show constantly the csrss.exe process break with a BAD_POOL_HEADER stop error (19) referencing the win32k.sys.
It's probably another pilot, a third-party driver that is causing the problem.
I would say, at this stage, to enable verifier against any non-Microsoft drivers to stress test them and try to eliminate a problematic driver:
Start > type check in the search programs and files, then press 'Enter' > create standard settings > next > select the names of the drivers in the list > select all non-Microsoft drivers > finish
Restart the computer.
Continue to use the computer normally but if you have any available BSOD brand minidump files.
If after the activation of the Verifier and restart the computer, you receive a BSOD on startup and cannot start Windows, restart the computer in "safe" mode, and follow these steps:
Start > type check in the search programs and files, then press 'Enter' > delete existing settings > finish
Restart the computer, log in Normal Mode and make available any resulting minidump file
I would also say, before you enable Driver Verifier, to download, install, update and run (quick scan should be sufficient) Malwarebytes' Anti-Malware (free version), in the case of McAfee missing something:
-
Windows Media Player has encountered a problem and needs to close
Original title: Window Media Player
I run Window XP Professional Service Pack 3. My Window Media Player suddenly opens for a second and disappears again. I downloaded the software again, but nothing has changed. I downloaded Microsoft troubleshooting software, there is no full download, it came with "Troubleshooting cannot continue because an error has occurred 80040402 cod." The last time I went to Media Player, he had an error message: "Windows Media Player has encountered a problem and needs to close. AppName:wmplayer.exe, Mod/worm: 11.0.6000.7000, AppVer: 11.0.5721.5262 Offset: 000aba9e, ModName: 01key indiv. I managed off option and need really professional help from somewhere.
Walter
Click Start
Select Control Panel
If it is in Classic view, select performance and Maintenance
Select System
Select the Hardware tab
Select Device Manager
In the list of devices, you see all of the devices listed with yellow exclamation points?
If update you the device drivers for these devices from the device manufacturer.
Maybe you are looking for
-
I ve noticed that the laptop freezes a few times. It is in any situation, even if I m just surfing. It also happens in the games or if I m listening to the music, but I do not know why this is happening.That music is stuttering, the mouse doesn't mov
-
I am trying to build a distribution. I installed in my laptop and a PC of LabWindows/CVI lab. The distribution is built using the PC lab. The construction process is rather blocked at \temp\template.ini when I try to use my laptop. The only way to pu
-
Srinivas R, tell me how to transfer the xp fax console to windows 7 new machine?
I need to move my fax con sole with all the ins and the present from xp on a new computer windows machine 7. Tell me how
-
Error Code 800706BE when installing Windows Live Essentials 2011 update
Original title: 800706BE error Code I installed the latest update of Windows Live Essentials 2011 windows. Part of the way in which the process, I was asked what I wanted to download and I chose the minimum download which has been downloaded and inst
-
How do you define the preprocessor directives?
I tried to define directives of preprocessor everywhere I can set variable custom in settings of project... nothing helps. Is it still possible? Why is this so hard to do in Momentics base surgery? Under a normal Eclipse C++ environment, I believe th