Windows 7 Home Premium cannot be updated (error 80070490)

Similar Questions

• Windows vista home premium-inable install updates error code 80070005

  original title: windows vista error code 80070005 premium family

  My computer won't allow updates. Whenever I check for them I get the error code 80070005. How can I fix it? Ive tried a few fixes here and nothing works.

  Hello

  ·         What are the troubleshooting steps you have tried?

  ·         You get the error message with code 80070005?

  I suggest you follow these methods and see if it helps:

  Method 1:

  Try to install the update to the clean boot and check if it helps.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

   

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

   

   

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 3:

  I suggest you to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4:

  Follow the steps in the below article mentioned and look for the question.

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 5:

  Error code 80070005 means generally that you're not quite allowed to install updates. Check out these articles from the KB and check if that helps.

  http://support.Microsoft.com/kb/816731

  http://support.Microsoft.com/kb/918355

• Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Problem running windows 10 to date for windows 7 Home premium 64-bit reference error code 08C 1800103 - 089002

  Could not update windows 7 Home premium service pack 1 for windows 10.

  I tried windows update. all updates are installed except win 10 update that comes up with unexpected error

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• I started to get a red message box when trying to get updates... "windows cannot find updates" error 80070490

  I started receivine a red message box when trying to get updates... "windows cannot find updates" error 80070490.  I tried this fix only displayed in this field of the error help and have downloaded the fix - it Center, and he is unable to perform the task.  Please let know us what I can do.  Thank you

  Hello

  Please see the following Microsoft KB article:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates:

  http://support.Microsoft.com/kb/958044

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• Windows 7 Home Premium cannot map NAS / network storage drives

  Hi, I'm currently on a PC Windows 7 Home Premium and I have two 2 NAS drives.

  I am running a Buffalo Linkstation (old version) and a new Iomega Home Media Network Hard drive.

  Initially I thought it was just my Linkstation from Buffalo who is older and has had no updates of the firmware that cannot be mapped as a network drive. But I just got my new Iomega hard drive today and installed the latest firmware and software. The Iomega software detects the drive and all of its shared folders but the problem is that I can not map any shared folders as a network drive, making it useless on my Windows 7 computer.

  I can access both NAS drives on my windows xp pro machine very well.

  I got off the phone with Iomega technical support and they said that it is a well known problem with Windows 7 Home Premium and readers of Samba. Is there someone out there who can give me a solution? I already tried the fix LMCOMPATIBILITYLEVEL on other forums I found by changing the values 1 or 2 - but still no luck.

  It gives me an error of network even when I try to connect to the ip address of the NAS, however - it appears on my network but I can not access or map!

  I really want to get my readers network running on windows 7 Home Edition premium without having to upgrade to other users are still having problems, I read. It's a little pathetic I can't even map a network drive on my pc.

  I had exactly the same problem with my drive hard Lacie network. If your drive contained donkey type of media, music, or video, Win 7 use the reader as a "Windows Media Connect" device, opening the disk in Media Player, showing only media files...

  This prevents access to all ot0her of the player records.

  However, I found that it is possible to add the drive as a network drive, if you know the name of the root folder.

  In my case, it's "openshare", so when you enter the path to network drive, I use \\192.168.xxx.xxx\openshare, and it allows me to access the drive...

  Why Microsoft chose to make this type of access to the files of so difficult to get simple network, just blows my mind, knowing that WinXP has it done easily...

  I hope you were able to understand my English, and that this could be useful.

  Kind regards

• Windows 7 Home Premium hangs on updated 25 June 1, 2010

  Hi I have a PC HP PavilonElite HPE-210Y new I bought on Friday, it is installed with Windows 7 Home Premium.    Friday we put in place, made overall upward and downloaded all the updates without problem. On Saturday, we have installed Adobe CS3, DropBox, Microsoft Security Essentials and Microsoft office 2007 (all legitimate copies).      It worked well through this morning, but at about 07:30 the computer says that it had updates installed (29 to be exact). I clicked on ok and went about my business, but it has since been blocked to update 25 for the last 2 hours, but no progress.   Light on the computer that blinks when the HD is committed has not lit at this time and I'm stuck on the screen that tells you not power off or unplug the machine installation 25 of 29...  I had not changed my power management settings, but after some research, it's seems that there are a few known issues with the processor to wake up for mode 'sleep', no chance that this is part of the problem?   other thoughts of what I can do to fix this?    Thank you

  AD

  Hi a drum.

  First, restart the computer and check if resumes normally and continues.

  Otherwise, start your computer in safe mode, and then perform the system restore .

  After restoring the system, wait until you get notification of updates of Windows on the system tray, close all applications before accepting the updates of Windows. Check what is happening.

  Windows have to restart Windows updates take effect. Check if it still hangs at the 25^th update.

  FOR INFO:

  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Also, before you configure Windows updates, go to Power Options and set it to never sleep.

  Check the updates that have failed in the history of the update.

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click view update history.

  3. to view more information about an update, double-click it.

  You can also look at the position of Dale Qiao from the link below.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/8c3715b6-aa4e-44ff-b709-5a6c5a779825

  Let us know the status of the issue.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Validation in Windows Vista Home Premium at the start: errors and complications.

  I was directed to this forum as a last chance for my situation.  I'll copy what I wrote before:

  First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.

  With that of the road, I'll try to explain my situation.  Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive.  So I ran a restoration of the system to an earlier time.  After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid.  They gave me three options:

  Reduced functionality mode (does not work; see below)

  Enter the product key

  Contact HP - do you have this: they wanted $ 100.

  Now before to get started by offering suggestions, you need to get more information.

  I can't use the reduced functionality mode.  When I click on it, an error with file not found window appears.  The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network.  So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.

  Now there is more.  Frustrated, I tried to follow guides anyway.  So I followed the following steps:

  Step #3 game

  (1) open Internet browser

  (2) Type%windir%\system32into the browser address bar.

  (3) find the CMD.exe file

  (4) make a right click on CMD.exe and selectrun as administrator

  (5) type: net stop slsvc (it may ask you if you are sure, click Yes)

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Typenet start slsvc

  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  (11) restart twice

  Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem.  Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).

  Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower.  I have no Dvd or Cd.

  I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows.  I have no idea what I'm supposed to do now.

  I used these links:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11

  and many others that I can't find my way.

  I am posting this from my laptop not my computer with the problem.

  Here is the link to the original thread:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471

  Is it possible that I can fix this?  Can I install Linux or something, just so that I can access my files?  Thank you.

  Hello
  
  Since you are concerned about the data on the drive, I suggest you first backup of data.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  I recommend you contact the manufacturer of the system to help about it.
  http://h30434.www3.HP.com/
  http://welcome.HP.com/country/us/en/support.html
  http://welcome.HP.com/country/us/en/contact_us.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows 7 Home Premium slows down updating

  * Original title: Windows 7 Home Premium

  I don't know what it is, but Windows 7 must be the slowest when it comes to update. Also, why do I have to restart the Windows Update Service Management?

  100% sure... This isn't my machine and no it's not my broadband connection, which works well for me. Let's not forget about my sheet and ISP service.

  (UPDATE: problem solved!) ***********************************************

  I fixed it. I went in MSC and RESTARTED (1) BITS, Cryptographic Services and Windows Update. I restarted the PC, checked, wouldn't update of course so I knew that these services have worked, if I think of anything else. I went back to MSC, just completely turn off these 3 services, restarted PC... after the restart it was not long ago maybe an hour or so updates began to pour.

  I hope that those who have this problem help.

• We continue the installation of Windows 7 Home Premium OEM purchase, get error 0 x 80070057.

  It fails to format the selected partition.  ATP, he did the system disk 0 partition 1 100.0 mb; disk 0 partition 2 128.0 MB MSR (reserved); disk 0 partition 3 1862.8 GB primary... This last partition is where he tries to install Windows 7 Home Premium OEM (new drive through Newegg). I searched far and you have:

  * check the cable SATA and know if it is in place or not

  * changed to another SATA cable in the case where it was defective

  * verified with diskpart to see that the disk is TPG, is apparently (had implicit message was MBR, it uses diskpart to TPG)

  * Down the hd in the 2nd slot start 6-port hd

  The motherboard is ASUS crosshair formula-Z 64-bit v

  The hard drive is Seagate Barracuda ST2000dm001 7.2 K 64 m

  Windows 7 Home Premium 64 bit OEM

  We are puzzled at the present time.  Any help to know why does move not Windows 7 would be appreciated. Any questions, just ask. Thank you!

  Original title: son is building a game system, new everything. When you are ready to install windows 7 Home Premium oem bought, continue us to get error 0 x 80070057.

  Delete all partitions/volumes on the drive # (ex: disk 0) that you want to install Windows 7 as UEFI system on until # shows like unallocated disk space.

  When you are finished, click on/tap on New, apply (for the size of the disk) and OK.

  You'll notice that the drive has now been formatted as GPT with 3 partitions. Select the "Primary" 3 partitionand click/click on Next.

  NOTE: You may receive a warning "Windows can not be installed on disk 0" , but also long as you can click on the button Next , you're fine.

  Note: The 3 partitions are:

  • Partition 1 EFI partition - System - system that contains the NTLDR, HAL, Boot.txt, and other files that are required to start the system, such as drivers.
  • Partition 2 - MSR - partition MSR (Microsoft Reserved) that reserves a space on each hard drive for subsequent use by operating system software.
  • Partition 3 - primary - where Windows will be installed to.

    It is imperative that these 3 partitions remain in the exact order as they are

  That's all.

• Windows 7 Home Premium - cannot change the user name in the authentication dialog box

  I was hoping someone might be able to answer a question on how to get a computer running Windows 7 Home Premium to display both the username and password fields when attempting to authenticate on another Windows computer.

  Here's the situation: allow us that the leaders and other members of the staff allowed our Organization to establish a VPN connection to our corporate network (via Fortinet Forticlient, for what it's worth.)  Once the VPN connection is established, on the remote computer, the user must be able to access the UNC path to our file (\\servername\share) server.

  Because the remote user has not yet authenticated on the domain Active Directory of business, a dialog box should appear to the user input a user name and password.  Enter the user name (domain\username) and password and share should open, and the user must then be able to access the files in the share.

  I (and several other members of the staff) have been using this method successfully to access files via the VPN connection, and it works very well.  However, it does not work whenever the President of the company will connect to the VPN from his computer at home.

  Whenever the President connects the VPN and attempts to access the UNC path, he reports that the dialog box which appears on his computer at home has only one field for a password; the user name field appears to be on his local user account, and it doesn't have the ability to change.  (I have him asked if there is an option 'use authentication information', and he declares that there is not just a dialog box with a single field, the field of password.)

  The President is running Windows 7 Home Premium on his computer at home, so I thought that the problem could be because he was running this edition of Windows.  However, I have installed VPN client and test the connection on the server share file using the computer of my wife, who is also running Windows 7 Home Premium, and I received the two fields as expected authentication dialog box and has been able to authenticate to the domain successfully and open files from the share with no problems.

  Does anyone have recommendations on what I can try to allow the President to authenticate successfully to our server share?  I am confused, and it is eager to be able to get remote access to files on his home computer.

  Hello

  Please contact Microsoft Community.

  I suggest you to ask your question in the Technet Forums, where we are the support technicians who are well equipped with the knowledge on these issues. Please visit the following link to go to them and post your query there:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Have a great day.

• Windows Vista failed to check the updates, error 80070490, did he ran but the problem persists

  KB2679255 & KB2676562 installation problems. Look for day, but Windows Vista Impossible answer updates check updates, error code 80070490. Other updates to Windows Installer. Ran he made but problems persists.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Windows Update error 80070490

• Windows Vista Home Premium cannot find Xbox 360 as extender

  This may be long but im giving information as possible.

  I'm good with the computer. My Vista Home Premium computer cannot find my xbox 360 as an Extender. When I use the WIndows media player 11 and share, he sees my xbox very well. Zune software, same thing. My xbox 360 is here no problem on my network in "My Network Places".

  In Media Center, once I typed the 8 digit number it is said that he can not find the Extender. I did the following:

  Reset my router
  Reformat my computer
  Reset my xbox 360
  Double checked I got the right 8-digit number in media center
  Disabled windows firewall
  Went to the tab exceptions and compatible: WIndows Media Center, Media Center Extender, eshell.exe, discovery network
  went to the management of the computer and turned on UPnP device host (changed the startup type to automatic and restarted my computer)
  Permit "filter multicast" in my router settings
  UPnp enabled in my router settings
  Upgrade Vista (with SP1 as well)
  Re-installed the drivers for my wireless card
  Connected to the Xbox 360 WIRED to my router

  Heres the funny thing, I have a Sony laptop vaio with Windows Media Center Edition 2005 on the same network that sees my xbox all the time. Its actually connected through a microsoft extension program (XboxMCE05Lite - enu.exe) basically it works fine.

  One funny thing that may help with my vista (Home premium) Windows Remote Assistant machine fails or the other.

  Any ideas? If this can help, too, this computer is built on the ground.  Sense, this isn't a HP, Dell, Sony, etc.

  Network equipment:
  Router Linksys WRT54G
  Map of Netgear WG311v3 54 Mbps Wireless

  works fine with my other laptop. So I guess that the problem must be my wireless card. I guess that's a PCI card it would have nothing to do with the problem. I'm going tomorrow to buy a NIC. USB Im not in a race simply because my internet works very well without getting a new network card. I am just puzzled and would like to get this to work because I hate running through computer problems and in abeyance. I'll get one tomorrow and let you know the guy.

• Update KB981715, 8007006e, Windows 7 Home Premium, Office Pro 2007 error Code

  Kept getting a notice of update for KB981715.  After download, kept getting the 8007006E error code.  I am running Windows 7 and Microsoft Office Pro 2007.

  AAA93,
  Run the following tools and then try to install the update again.  Let us know the results of the tools.

  System File Checker

  Update of the system analysis tool Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Home Premium 32-bit update stopped working - error 80072EFE Code

  The last time it worked was in April. I tried to manually search for updates, but still get the above error code. Has raced as a check disk and repair on my C drive that found no problems. Also defragmented the drive. Leftmost 120 gb of free memory. A ran a Malware remover that found no evidence of anything suspicious on my drive. Oddly enough my C drive is reported as missing in the backup settings of Vista that I can't save on my external drive (J) so that I can access the C drive of my computer and it seems OK!

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Your error code is mentioned in the link above.

  If the above does not resolve the problem:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Windows 7 Home premium install the update. When I reboot the update tries to install, but fails. I get the message "failure of windows update Setup, reverse the change.

  I tried to copy the CBS.log to a folder, then opening the files to search for an error code. I couldn't find any error code. These files are large I can remember something small.

  Try this first: -.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If no joy, then

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. follow the links in the dialog box of Windows Update as more information or help and Support to try to resolve the problem or post back with more information on what the error code can be.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.