Windows 7 - How can I remove updates?

Windows just installed an update in my Windows7 machine - he's so messed up my whole computer, and I can not load any programs correctly - Finally I got on IE after MANY attempts - how I removed the? - and the value of my computer to deny updates from windows? I don't want them if they cause damage

Don't let not this update automatically. Change my computer on the desktop / right of the right mouse / properties

Tags: Windows

Similar Questions

  • How can I remove updates, chess it eatin my hard drive got both of

    How can I remove updates, chess it eatin my hard drive got both of. Also if I want to get my memory on my c drive and have plenty of room in my d drive can take a little d and use of my drive c. and how

    Hello

    Try these steps and see if it helps.

    Delete the history of updates

    a. go to the start menu, then all programs, accessories. Right-click on "command prompt" and select "run as Administrator".

    b. copy / paste the command below:

    net stop wuauserv

    c. valve on register.
    Note: Wait for confirmation that the service is stopped.

    d. to remove the file, copy the following command at the command prompt:

    del %systemroot%\SoftwareDistribution\DataStore\Logs\edb.log

    e. restart the service with this command: copy and paste the command below:

    net start wuauserv

    f. valve on register.
    Note: Wait for confirmation that the service is started

    g. restart the computer and check.

    Note: Updates cannot be uninstalled, but only the entries will be taken.

    See also:

    Delete files using Disk Cleanup: http://windows.microsoft.com/en-US/windows-vista/Delete-files-using-Disk-Cleanup

    How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  • How can I remove updates in the App Store I want?

    How can I remove updates in the App Store I want? that is no longer use app, but I'm getting updates listed.

    Delete all copies of the application from the main HARD drive and all external drives or mounted partitions which can have the app.

    By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.3

  • How can I remove updates for Windows Vista? Duplicates are KB976325, KB973917, KB974318. The system still wants to install updates and just duplicates on again once. First update list has 20, second and third about 18.

    Duplication did not begin until I tried to load the list of updates.  Continues to tell me the same updates are available and download them if allowed.  Only the update that has been update group above that does not DOWNLOAD is Internet Explorer 8 for Windows Vista, which I am downloading now. When I go to 'historic day' to remove duplicates as indicated in the instructions for help. duplicates above are not listed. Of the; folding situation is on a Gateway laptop.  I am writing this issue on my Gateway PC.

    LiveUpdate install updates for your Symantec/Norton application only.

    Don't worry what you see in the installed updates or unable to uninstall the 3 updates, simply 'hide' and move.

    1. stop the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > Right click on run , and then select run as administrator >
    (type or copy/paste) %windir%\SoftwareDistribution > [OK]
    Open the download folder and delete its content
    Close the window.

    3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right-click on KB976325 KB973917 and KB974318, in turn. Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

    4. start the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click Start
    (Stopping the service will take a moment)

    =====================================
    To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How can I remove updates I don't want HP Support Assistant?

    I continue to receive HP Support Assistant pop-up windows that I've updated.  The only updates in there are 2 Optional updates install BING, I don't want to.  Is it possible to remove these 2 Optional updates, so that I only get pop up?  Thank you very much!

    It's as simple as 'right click' on the BING update and select "hide." When get you the update program, you will notice that the update of BING is not displayed.

  • Windows 7 - How can I remove SP1?

    Load WIN 7 SP1 on a HP MINI w/WIN 7 STARTER. How do we uninstall SP?

    How toUninstall Windows 7 SP1 releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • How can I remove a picture that I put in place to share?

    I don't want to share a photo that is on my essential windows.  How can I remove it?  I don't want to see the photo of my friend.  Perhaps is it better to send a photo as the poster.

    Hello trudie2119,

    Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Essentials and would be better suited to the Windows Live Solution Center community. Please visit the link below to find a community that will support what ask you:

    http://windowslivehelp.com/

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I remove the homegroup to my desktop icon?

    How can I remove the homegroup icon that suddenly appeared on my desktop Windows 8

    I know and respect the fact that Sharief K is a Microsoft Support Engineer. but he doesn't know what he's talking about as a Microsoft Support engineer or he didn't understand the question.

    However, here's how to solve the problem in the right way...

    Question about this community newsletter is:

    (Windows 8) How can I remove the 'host group icon"from the desktop?

    Answer:

    1 right-click somewhere on the desktop that is free of icon/s with the left button of the mouse.
    Select "Customize" in the context menu, which will take you to the selection of window customize.

    2. Select "Change desktop icons" in the area of the hand at the top left of this window.  A "Change desktop icons" dialog (context menu) is displayed.

    3. Note the box on the left of the 'network' is checked.  Uncheck the box and then left click of the mouse will apply.

    4. at this point, the 'host group icon"will be removed from the desktop.  Now again check the box to the left of the 'Network' and then the mouse left click apply.

    And your all set.  That is of course until what you restart your computer, in which case this problem will happen again.  Gives one does not want to restart its system ever if you have Windows 8.

    On a more personal note, I am A +, Network +, MCP and a Bachelor's degree in electronic engineering technology and experienced Microsoft since 1992 when I always still served in the U.S. Army.  Sorry, but I am appalled and disgusted with the OS of Windows 8 not to mention Microsoft Office.

  • How can I remove old updates from windows to prevent their fill my hard drive?

    How can I remove old updates from windows to prevent their fill my hard drive?

    You don't want to. Otherwise, why would have installed their in the first place? They are updated for security. Thema alone.

  • How can I remove the updated in the toolbar in Firefox 20.0.1 search box?

    After you have started this morning Firefox version 20.0.1 is now updated on my Windows 7 desktop. The new "Search for update" box in the toolbar next to the tabs is a gene and redundant. How can I remove this field of research?

    Hello, please remove the 'default tab 1.4.4' addon you have installed under firefox > addons > extensions.

    Disable or remove modules

  • How can I REMOVE an update installed without permission?

    FF, updated even though I had ticked the box that says 'never check updates.' I had version 17, now I'm on version 18. This update is not yet listed in the history of the update, but now Hulu does not work and I get a message that says that my Flash drive needs to be updated. I will not even enter the countless reasons why I NEVER do that! I despise Adobe! I finally found a version of their player who is not screw up every five minutes and now Firfox saw it all!

    What is the problem? It's frustration level Microsnot!

    How can I remove the 18 updated version and revert to 17?

    FlashPlayer
    (Julesb100 - you may not be interested by this but other readers of the thread can be)

    Flash Player has critical security issues once again

    Comment a lot of Firefox Windows problems concerns the protected mode introduced in Flash 11.3. A solution is to manually disable the protected mode, then you can find more recent versions of the work of FlashPlayer

    Julesb100

    I do not use Windows at the present time. Not sure if Firefox did not update a option now. Personally I would not downgrade to version 17 it is not secure and does not have the latest patches. If you wish to make in order to follow the link in this article. Install an older version of Firefox

    A better option

    disclaimer - this is not official advice
- this procedure is NOT supported by support.mozilla
- and is not recommended for personal use

    Use the ESR version, at least it is safe and will use Fx17 soon.

    If you do not need updates to block there are possible ways (but not necessarily on the ESR) it is to get rid of the address update string.

  • How can I remove Windows 7 Service Pack 1 Beta (KB976932)?

    How can I remove the Windows 7 Service Pack 1 Beta (KB976932) "from the list of Windows Update download.  I removed it but it keep asking to install it from Windows Update...

    Start regedit, go to

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Win7SP1]

    and delete the entry "Beta1" ="77048308-e41c-47a2-be8a-76e32ab859bf."

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • How can I remove a bad XP (kb971029) update and download it again?

    How can I remove a bad XP (kb971029) update and download it again? Thanks for your answer with impatience.

    Degause

    When you have downloaded the update, asked you "where to save" on your system.

    so you can either do a search for windows to update 'or '.

    try to re - download the update as before and see what folder you can chose to save it.   interrupt the current download, and then open the Explorer to track down the location where the previous download.

  • How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

    How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

    Hi poomoon,

    To perform the clean boot procedure, follow the instructions in the link below.

    Step 1: Perform a clean boot
    Step 2: Enable half the services
    Step 3: Determine whether the problem returns
    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns
    Step 6: Resolve the problem
    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode.
    Uninstall or update the program that is causing the problem.

    If this does not work, let us try to restore your computer to a previous state of safe mode.
    Follow the instructions below to restore your computer to a previous state.

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
    2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
    3. in the System Restore dialog box, click Next.
    4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

    Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
    5. click on finish.
    6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

    Check whether the problem is resolved.

    I suggest that you create a restore point before you follow the instructions below.
    How to manually create a restore point?

    1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
    2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. click on the tab System Protection and then click on create.

    In the System Protection dialog box, type a description, and then click on create.

    You can also try to remove the entry by using bcdedit command in Vista by following the links below.
    1. click on start.
    2. type cmd and click with the right button on cmd.exe to select run as administrator.
    3. Enter the following text.

    bcdedit [{ID}] /deletevalue datatatype

    The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

    For more information, please see the links below.
    http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
    http://msdn.Microsoft.com/en-us/library/aa906211.aspx

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?

    Original title: upgrade Windows 10

    I have a Dell Studio 1749 under Windows 7 Home Premium.   I postponed the upgrade of Windows 10 to the present day.  The update file appears in the control panel Windows Update Panel, but when I click start it restarts Windows 7 simply and tells me that the new updates have been installed but it was Windows 7 updates since yesterday.

    Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?    Or maybe another solution?

    Thank you.

    Review:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

Maybe you are looking for