Windows 7 keyboard drivers cannot load. (code39)

Similar Questions

• Windows #2 ISATAP adapter cannot load driver (code 31)

  Using Vista Home Premium, I get the following error message:

  "microsoft isatap adapter network adapt #2 windows cannot load driver (code 31).

  Because I can not connect to the internet, where can I get the correct driver.

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Tecra P11 and Windows 7 32 bit - cannot load the WiFi

  Hello

  I have a Tecra P11 (PTSE3A-00T00K) which has been loaded with Windows XP, but sold with Windows 7. I have recently reinstalled Windows 7, but could not get WiFi to work. I had downloaded the Intel Wireless LAN driver, but the program doesn't seem to recognize WiFi. Bluetooth monitor and located only ConfigFree Bluetooth function, but can't seem to find the Wireless Lan drivers. The network tab is not present in Device Manager, and network controller is in other devices, but with a lock icon.

  How to make WiFi work?

  Thank you

  Exact specification for laptop is not known to me but as I can see on the download page there is also offered Atheros WLAN driver version 9.2.0.500.0.s3264 (for models Atheros).

  Have you tried to install this driver?

• I get a pop up window that says 'URL cannot load. What gives?

  At random, well-known sites, I randomly get a pop up window that says: "The URL is not valid and cannot be loaded." Firefox loads the site but I have to click outside the pop-up to go forward.

  What gives? I am running Windows 7 on a new computer HP laptop

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems
  
  
  
  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Windows Installer is corrupt, cannot load programs

  try to load adobe cs5 download or contribute 4 disc, were in line with adobe for hours & they say contact microsoft

  * original title - Windows Installer is damaged, can corrupt the program load or updates Adobe support told me that the installer is *.

  First unregister Windows Installer, and then reregister Windows Installer and check if that helps.

  Start > type in the search box > msiexec /unreg > press ENTER.
  Start > type in the search box > type msiexec/regserver > press enter

  If this does not help, download and install the latest version of Windows Installer.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 10 Windows for Windows 7 Ultimate reversion - cannot load, delete, or update the reader

  Despite MS saying that my machine was compatible W10 does not work and their technicians told me to come back

  Acrobat Reader no longer appears on the options for the pdf or the Start button program list

  Drive appears in the list of software in Control Panel programs and features under XI (11.0.12)

  Any attempt to modify or delete on the reports of this form that requires the software is on a network resource that does not exist

  He has never been on a network resource

  He points to two programs in C:/Program Data / Adobe etc etc the two .cabs which is a) not on a network and b) obviously not what he needs

  Use the update/download service online travel on "you have a newer version already" or tip to the same network resource error

  so I do not know how to do to uninstall then reinstall as I don't know where it seems to establish I already have a copy and so cannot delete and overinstall another, cannot access its cabins nor can I use its uninstall or reinstall that.

  Also, I can't read all the documents.

  Help?

  Hello

  In this case you can try to use the cleaning tool Acrobat refer to the following link

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Then use the following link to install acrobat reader

  Install Adobe Acrobat Reader DC | Windows

• I am trying to install Norton 360 message is I have a problem with Windows. Tried to download Windows Installer and still cannot load the Norton. Can anyone help?

  Problem Windows install

  You should visit support Norton"

  'I have a problem with windows' isn't exactly the given msg err

• Satellite A200 - cannot load the keyboard and touchpad drivers

  Hello

  I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
  My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
  In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

  i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

  My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

  I tired restore my laptop
  LAST GOOD CONFIGURATION
  Apply unsigned drivers
  Safe MODE (does not work yet)

  Downloaded some software like driver detected etc, but... NO RESULTS.

  I don't want to go for WINDOW RECOVERY CD for OS to re - install
  I have a large number of parameters, I don't want to erase...

  IS THERE A SOLUTION FOR IT?

  My warranty ended already after one year

  pls help and answer...

  That s a great info. Thanks for the clarification!

  Good bye

• Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

  I have a HP Pavilion running on XP.

  Device Manager displays the following material: A: HP CD Writer CD16b

  B: pioneer DVD - RomDVD - 116.

  Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

  By clicking on the two points of product

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

  I created the 'properties' of each machine that pilots should be:

  For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

  I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

  Does not cure the problem.

  Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

  I'm out of my depth now. No idea what is ASPi Shell.

  Help, please

  The problem is most likely the pfc.sys.

  What I would say, is to follow the steps under "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

  Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

  Here is some info on the pfc.sys:

  http://www.Neuber.com/TaskManager/process/PFC.sys.html

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio X 870-14 G - 8 Windows cannot load drivers

  QOSMIO X 870-14 G WITH WINDOWS 8 CANNOT LOAD DRIVERS for USB - IF USB HOST CONTROLLER xHCI (CODE 31). REINSTALLING DRIVERS DOES NOT RESOLVE THE PROBLEM AND REINSTALL WINDOWS 8 DOES NOT SOLVE THE PROBLEM OF TOO.

  IS THERE A SOLUTION TO THIS PROBLEM?

  >... REINSTALL WINDOWS 8 DOES NOT SOLVE THE PROBLEM OF TOO
  Have you reinstalled original recovery image and tried to launch Notepad with the factory settings?
  Have you noticed this error on the first day of use?

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly