Windows 7 media center tv guide does not update beyond 21/03/14 @ 19:00

Similar Questions

• Windows 7 media center tv guide planning lost .dll

  My anti-virus found a .dll suspect something like a regular planning. I deleted the .dll file and it seems that it was necessary for the update to Windows 7 media center tv guide (now displays the available data). I have reset media center several times with no luck. Unfortunately, I can't restore to an earlier date or obtain the file from my Recycle Bin. I still have Windows 7 64 bit upgrade disk if I can find the name of the file and know where to copy it in.

  Thanks for your help,

  jqh947

  Hi jqh947,

  1. you remember which dll file has been deleted?

  I would say Mr scanner SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• picked up my computer and does not, Windows xp media center edition service pack 2 update

  I got my computer and now it will not refresh, I'm under version2002 service pack 2 for windows xp media center edition, I did another time and of the load down a service pack and don't remember what you

  Hi DeirdreGrimes,

  Windows Update no longer works if you haven't installed XP SP3. To check your level of service pack system, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.  If your system already has XP SP3 installed, you can try reset the windows update components by referring to the link below.

  There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3

  http://support.Microsoft.com/kb/950717

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

  If your system does not already have SP3 installed, you can:

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.

• Why Windows Vista Media Center Program Guide stopped working

  I've been using Windows Vista Media Center as my main way to watch and record the TV, music, and Photos for a few years (shortly after Windows Vista came out).

  Since January 1, 2013, the program guide showed no data.

  I believe that this is because the Microsoft agreement with the broadcasting of the Data Services to the United Kingdom is exhausted.

  What is Microsoft doing about this?

  Can what steps I take to restore my Media Center if you work?

  Hello Nikki Locke,

  That's great, that you have found a solution. However, you can view the following information.
  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• Windows XP Media Center Edition computer will not start.

  When it starts, I get a BootMagic screen that allows me to choose the normal Windows operating system or partition DOS6. The next screen is text offering choices such as: Safe Mode, last known good Windows, normal windows, etc. None of the choices do something else that restart the boot process.
  I have backups of the C: drive in real Image files and ntbackup. I would like to make a bootable cd or dvd with the files needed to be able to copy the data on another dvd or on the local network to another computer. This computer was made by the gateway. No real installation CD were provided, just a "operating system Disk' which is of no use. The disk has been partitioned as C: D: K: etc. I added a 40 GB IDE drive, which is where half the data is I want back. I can 'see' readers when I boot from an old CD disk to Image, but may not see the LAN or write in the CD burner. Basically, should what files I put on a cd to boot?

  Well, almost a month since the gateway computer's dead, and I do not have anything on it. Spent a lot more time for the new computer with Windows 7 to run my most used programs: WordPerfect and Lotus 1-2-3. According to me, that you gave me a choice when I reinstalled Windows 7 to use either 64 or 32-bit. If I had a choice, it is 64. At this point, I wish I had chosen 32, due to all the incompatibilities resulting in 64. I doubt that there are real benefits for me. One thing they point out is his ability to deal with > 4 GB of RAM. This computer has 2.

  What I installed was XP HP discs received with a laptop period of 2002. Probably violates some policy Windows, but my rationalization was that bridge should have on giving me the opportunity to re - install the Windows XP Media Center edition. I prefer to get this OS works because it has a smooth operation built in encryption system.
  I tried to use the provided gateway recovery cd again, but not long after starting it fails with a 'memory overflow, please insert another disk' message. Gateway support has not been cooperative, so I can try again. I think that they have it for me.

  The XP system is running on a 40 GB IDE drive that I had added to the computer. There are too many error messages trying to install an operating system on theoriginal 250 GB SATA drive. Usually the installation of software did not see the SATA drive. He is currently disconnected. It work pretty well in the new computer from HP in the 2nd SATA slot for to retrieve me my data.

• Windows 7 media center tv guide, update no past 18/03/16 @ 9 pm CDT

  I have 3 windows 7 media center computers - all guides have ceased to update more later.  One is OTA antenna Installation Guide and two Cable Company Guide Setups.  The latest Guide entry on all 3 systems is on 18 March at 18:00 CDT.  I tried to manually request updates to guide without result.  The update of the guide indicates success - but no other entries are downloaded.  I tried to restart the computers. I have completely updated Windows 7 for all the updates that are known except KB3035583.  Nothing seems to make a difference. Still no update guide beyond 3/18. / 16.

  Everyone sees the same date limit?

  Help?

  I got the email from my contact at MSFT that this should be corrected
  today ' today/tomorrow.
   
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows experience
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• My windows 7 hangs at startup and does not update microsoft isatap adapt #5.

  I use lenovo v570. Windows 7 just hangs up on start. IM using safe mode now. but when I check the drivers, the microsoft isatap #5 adapter has a yellow exclamation point and does not update. What should do? Help, please.

  Hello

  It's the Microsof Pnrtie on "Microsoft ISATAP adapter"

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• My Windows Media Center (Win 7) does not recognize my msi DIGIVOX TV Tuner

  My Win & Pro does not recognize my MSI Digivox USB TV Tuner card. Any other tuner software I install recognizes it. I have run the install, uninstalled and reinstalled the drivers and cleaned as best I could. The Windows Media Center Receiver Service is working and has begun. Is there a list of steps I follow troubleshooting or maybe an upgrade to WMC I should install. The current version is 6.1...

  If I try the same card on a Win7 laptop it works fine as well.
  A little confused.

  Hey Jef,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, I understand that Windows Media Center does not recognize the MSI Digivox USB TV Tuner card in Windows 7, but works in the same TV tuner card on the other computer. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

   

  Method 3:

  a. click the Start button.

  b. in the research area, type turn on or off windows features and press ENTER.

  c. expand the multimedia option.

  d. uncheck Windows Media Center.

  e. wait that changes take place.

  f. click OK and restart the computer

  g. Repeat steps to place a check mark next to Windows Media Center.

  h. wait until changes take place.

  i. click OK and restart the computer.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Windows Movie Maker, Media Center, DVD Creator, does not recognize that I have an engraver of DVD/CD operation to date.

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  =================================
  It is possible that you have a hardware problem with
  your burner but... the following article might
  be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Library Media Center browser icon does not work

  Hello I am using Media Center but the program library bowser icon does not work. Message is 'Check services and applications developed for Windows Media Center'.

  Let me know the solution as soon as POSSIBLE.

  Thanks adavance.

  I would like to reset Windows Media Center to see if it helps.

  Uninstall and reinstall the Windows Media Center:
  Step 1.
  Uninstalling in Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Center.
  4 restart the computer
   
  Step 2.
  Reinstall the Windows Media Center:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of Windows Media Center.
  4 restart the computer.

  Check the service Windows Media Center is running.
  Right click on computer, go to manage. Then double-click Services.
  Make sure that the following services status is not stopped or disabled.
  Windows Media Center Receiver Service and Windows Media Center Scheduler Service.

  Please let us know if this helped.

  Thank you

  Marilyn

• Windows 7 Media Player Wireless Remote does not.

  I have a fault with my wireless remote. Windows Media Player works with mouse enter only.
  However, dialogue of setting in the control panel wireless remote gives the screen of confirmation for each key pressed. The remote will also begin my "Power DVD" DVD Player app without problem.
  Any ideas please?
  I updated to Vista where the remote control worked well...

  The remote control is made by a company called 'X 10' (mine is a Medion PC) model No. OR28V RF Vista

  A driver is available on their website ftp://ftp.x10.com/pub/applications/drivers/x10drivers_6432_239.exe

  Remote control now works fine

• Media Center M7060n PC does not start

  I restarted the pc this AM when it was slow. No change recently, the last was an update of Microsoft a few days ago, but the pc seemed to work OK. All virus day and firewall.

  PC hangs on the "Windows XP" logo. It will restart in safe mode of Windows (with networking) fine. I tried to reset the points, but all dates so far I take will come back after the restart with "restoration incomplete". I tried dates from yesterday, last week and last month.

  I tired F8 during the restart... is to last known good startup... no luck.

  I defragmented just (but it is done automatically once a month) and windows "check disk for errors" tool, which is still ongoing after 3 hours. The display is a series of file locations "multi (0) disk (0) rdisk (0) partition (2) \windows\system32\drivers\" and then a lot of files ".sys".

  The hard drive light is still active, but the screen has yet to change.

  Thank you!

  Message edited by FF/PM on 06/05/2009 16:08

  You may need to try a new hard drive. You can also try a resumption of the standard. You won't lose your data.

  http://support.HP.com/us-en/document/bph07145