Windows 7 not genuine was installed Windows Vista, no internet connection now

Similar Questions

• have keepsstopping and vista service, internet connection

  my computer guard losing conection to the network must keep reconnection sometimes must close and reopen have card air with full bars

  Hello

  ·         What happens when you try to connect to the Internet?

  ·         Have you received an error message?

  ·         Since when you are facing this problem?

  ·         What changes have been made before that happened?

  You can try the methods below and check if the problem is resolved.

  Method 1: Now you need to update your drivers network card on your computer and locate the number.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Also try to solve the problem of Internet access with the help of the link below:

   http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   
  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows
   

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108

  Original title: update windows

  I downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108. pls help me.

  thanku

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I use a Windows Vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  You can if you have a wireless converter.

  Wireless PC to TV:
  http://www.Amazon.com/Warpia-StreamHD-wireless-full-1080p/DP/B004GTN0T4/ref=sr_1_1?s=electronics&ie=UTF8&QID=1317710448&SR=1-1

• HP pavilion dv6-1030us with windows vista 64 bit have now upgraded to windows7 32 bit.

  HP pavilion dv6-1030us originally with windows vista 64 bit have now upgraded to windows7 32 bit. MIC is unable to send sound in Skype after upgradation.

  Hello

  Try the following.

  First, uninstall Skype and when it is finished, restart the laptop.

  When windows has reloaded, download and reinstall the Chipset driver here.

  Once the installation is complete, restart the laptop.

  Let windows load completely, then download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45044.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Reinstall Skype and see if the MIC now works Ok.

  Kind regards

  DP - K

• I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  I use the proxy and I can not install any software test Adob via Creative cloud because the installed CC said: no internet connection. What can I do?

  Hello

  Can you please follow the instructions below.

  1. Click on the link below and open Photoshop Elements download link.

  Note: We are not anything downloaded from the page of Photoshop Elements.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  2. then click on the link below and download the installer directly mentioned in step 2.

  • for windows

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/Win64/Lightroom_6_LS11.exe

  • for mac

  http://prodesigntools.com/trials3/AdobeProducts/LTRM/6/OSX10/Lightroom_6_LS11.dmg

  
  

  
  You can run the installation file once the download is complete.

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Hello! After having no installed Creative Kloud no Internet connection.

  Hello! After having no installed Creative Kloud no Internet connection. The Internet is, Web sites do not open and the application writes that it is not. Access to the Internet using the pfsense gateway

  Hello

  Please see the link: cloud creative activation and troubleshooting of sign-in

  You can also view the nets below where the issue has been addressed:

  How to fix the 'No Internet Connection' error

  Creative cloud does not connect to internet

  Kind regards

  Sheena

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a Windows Vista family 32-bit premium install windows vista Home premium. Now I have no sound.

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  I have a family vista premium 32-bit install windows vista Home premium. now I have no sound

  Huh?

  Try to understand, taking the repeated mention, I guess you're saying that you have Windows Vista Home Premium (32 bit) and you do not have any audio.

  Have you spent at the web page of the manufacturer of your computer support and their section downloads & drivers and got the last audio/HiFi drivers for your specific hardware?  They are those who produced and load of the equipment.

• Ethernet is not compatible with Windows Vista, used to work, now no.

  A problem with your wireless network card

  Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

  The name of the model of your wireless network card is Atheros AR5414 (802.11a/b/g). This unit is distributed by many different computer manufacturers.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them