Windows 7 problem with playback flash memory

Hello!

I have a problem with my computer. It cannot read any flash memory except two memory cards I've used before on the same computer and my external hard drive. When I put any other (new) flash memory I don't see any information in this respect. It's as if there is no memory flash. Only what I hear when I put it, it's just a noise and nothing else. How it can be fixed? I use Windows 7.

Kind regards!

Conner

Hello Bilija,

Thanks for posting your query on Microsoft Community forum.

According to the description of the problem, it seems that you can not use any other card two memory and your external drive.

I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Have you tried the flash player which does not work on this computer to another computer? Same or different, has been the result?
  2. Have you tried different USB ports to connect the device? Has been the result even?
  3. Do you receive a specific error message/code?
  4. What is the brand and model of your computer?

I would suggest trying the following methods and check if it helps.

Method 1:

Run the fixit from Microsoft Fixit article and if that helps.

Hardware devices do not work or are not detected in Windows:

http://support.Microsoft.com/mats/hardware_device_problems/

Method 2:

If the problem persists, try to run the hardware and devices Troubleshooter and check if it helps.

Open the hardware and devices Troubleshooter:

http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

Method 3

According to the description of the problem, it seems that the issue could be due to USB drivers, if they are not updated, so I suggest you to update the drivers and check if it helps.

Update drivers: recommended links

http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

Automatically get recommended drivers and updates for your hardware

http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

Thank you.

Tags: Windows

Similar Questions

  • Problem with playback flash shipped after updatinf flash player!

    To help us to understand your problem quickly, please follow these guidelines when posting:

    • Specify your operating system (including 32-bit or 64-bit edition): 32-bit, Windows 7
    • Specify your browser and its version (including 32-bit or 64-bit edition) IE64bit
    • Specify your version of Flash Player : 11.1.102.55 32 & 64-bit

    Recently, I hv updated to the latest version of the adobe reader, but I did not play all embedded flash photo and video after. (except on the youtube page)

    When I saw the video or the peak keeps flash (including the game bar), which makes me not to display at all. Yet, when I adjust full-screen mode, it can be played successfully without blinking.

    But as you know when it is full screen, it's blurred. And I can not also view flash on the Web page ads.

    This continued for almost a month...
    It's really annoying. Please help solve the problem! > <

    Thank you very much!

    Your device driver is too old to work correctly with Flash Player

    Windows: How do I update the device driver for my graphics/video card?

  • Problem with playback device?

    Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

    Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

  • Help: problem with playback device

    Hello

    My dell latitude e7240

    and my headset logitech g150

    does not connect it says: problem with playback device

    It calls for 1 second then ends

    and when my friends try to call the said

    contact can only receive instant messages

    Help, please

    and fast

    Thank you very much

    I did a diagnostic test and other results are here

    https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

    and Skype is the last

    Thank you

    answer soon

    Morgan

    Topic/title edited for clarity.

    Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

    The specified Audio Capture Source only is Avnex Virtual Audio Device

    audio Capture Sources :

    Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

    Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

  • "the problem with playback device" with Skype.

    receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

    Hi BeverlyBowers,

    Facing any problem with the sound on the computer other than on Skype?

    Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

    Method 1:
    I suggest you to run the Fixit and check if it helps.

    Automatically diagnose and fix the audio problems and Skype webcam
    http://support.Microsoft.com/mats/Skype/

    Method 2:
    If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

    a. go to Start and click on Control Panel.
    b. click on her, then a new window will open.
    (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
    d. now check if the speaker or headset is listed here and right click above and choose Activate.
    e. highlight the speaker or headphones and click on 'Set as default'.

    Method 3:
    If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Problems with Toshiba Flash cards

    I have problems with toshiba flash Cards on my desk and stay there.  It says flash cards, not reponding, but I can't get rid of it.  This utility is really necessary to make my computer work correctly?  How can I get it out of my office?

    Hi Bklawinsky,

    ·         Did you do changes on the computer before the show?

    ·         The other device USB (Universal Serial Bus) have recognized?

    Follow the suggestions below for a possible solution:

    Method 1: You will need to check the updated version of the utility of flash cards on the site of Toshiba, if found, install and check if the problem persists.

    Method 2: If you can't find any update of the utility so I would suggest that you uninstall using programs and features, reinstall it later using the Toshiba website, according to your model number of the computer to download the utility below.

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

     

    Toshiba downloads

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Let us know if that helps.

  • Skype usage error: problem with playback device

    Original title: Skype.

    I'm calling by Skype and it is written that I have a problem with "currency of reading".

    What should I do?

    Hello

    ·         Audio devices work otherwise?

    Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

    Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Also refer to the support of Skype.

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Does anyone have problems with playback when editing v9.2?

    I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

    PLUG

    Samsung Chronos i7 with 8 GB of RAM and a lot of spare

    WIndows 10 build 10586.218

    First Pro 9.2 zigzag

    Pilot of 640 M from NVIDIA Ge Force GT 353.90

    The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

    C: Windows and programs

    D: project files, audio, and still images

    E: cache and Scratch

    F: media camera only

    G: export

    In addition, a form of backup solution in place.

    The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

  • Is a person having problems with playback with blocking sequences?

    Is anyone having problems with playback after creating a multicam sequence? This occurred after the recent upgrade.

    Basically, I merged my video files and audio files into one (fine and dandy), but when I tried to look into the window of the monitor or timeline, he would not play! What is the problem? I've done several times before...

    Let me know if anyone knows this.

    Thank you!

    I talked to Tech Support yesterday and they told me to enter all your audio clips in the sequence Ctrl + (secondary click) click on them and press Render and replace. Then, you close app and load project again you. It has worked for me since I went deep into audio original for all sequences of blocking and rendered and all replaced. Apparently, there is a problem in this version on the audio clips in sequences making making them generate this error, but this type of tech support does not explain to me exactly what was going on. Apparently the Render and replace fuction restarts a little audio clip and allows to you to sequence work normally again. Make sure that you apply to the original audio clips of each cam, no to your chopped pieces place in the timeline you edit.

    Let me know if it worked.

    Good luck.

  • Problems with Adobe Flash Professional CC (CS6 too) to save the animated .gif file or .swf file perfect

    Hello

    I have a problem with Adobe Flash Professional CC and CS6 to save the animated .gif file. This is a very simple work with logo. But I can't save a perfect swf or gif file, and that's bad news for me. Logo .swf file record with bugs. Bugs just see then file to insert in the page of freeshop. This is just example of test page, it allow you to see the bugs of logo - http://tagraseshop.graphicsrim.eu . Here is the actual page, but it's not my, freeshop with old logo is and I corect it - http://www.tagras.lt

    .Gif absoluted anime file not saved in Flash CC. Just the gif image. And why? My Windows 8.1 operating system.  In fact, I try to register on Adobe Flash Professional CS6. It is not save too...

    GIF "animation"- https://mega.co.nz/#! D8pEVaRR! LK4 ahNfhg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT
    SWF with bugs- https://mega.co.nz/#! jo5lSRyS! 1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ

    FLA -flash document- https://mega.co.nz/#! C94nCDSS! 7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA

    Perfect animation speed is here- http://e-shoptagras.graphicsrim.EU

    Who can help me?

    Any ideas?

    Thanks for your help in advance!

    But when I download the SWF logo in the page http://www.tagras.lt, it is always visible with bug, flash on it. I don't create it like this, why it is done that way? (Why SWF logo flashing/load?) ( http://www.tagras.lt look at the main title on the left).

    Thank you very much!

  • Problem with Adobe Flash Player in the browser Opera

    Dear friends,

    I need your help with my 2 problems I am suffring with Adobe Flash Player.

    I'm having a serious problem with Adobe Flash Player.

    I can see via my PC "Controlpanel" I have Adobe Flash Player 11. But here I'm missing Adobe Flash Player ACtiveX 11.

    How and where can I find it and then install it?

    Finally, I use Opera Browser.

    If I go on YouTube to watch any video. When I click on any video then, green background. I can hear the voice, but shortly after the Opera around is freeze.

    Shortly after the beginning of video then its background becomes green and after a few seconds all Opera browser freez. So I have to restart Opera.

    Thank you.

    Hello

    Download and install ActiveX if you use Internet Explorer.

    You need to install plug-in if you are using Firefox, Opera or Safari.

    The following link contains detailed information: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_heading_5

    Also, after the ActiveX installation, make sure that you disable ActiveX filtering in Internet Explorer. See the following link for more details: tiveX_Filtering__if_you_are_using_Internet_Explorer_9_ http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac

    Thank you

    Sunil

  • I have a problem with HP Flash that does not appear on my PC

    I have a few problems with HP Flash I do not know the * beep t. when I put in the other system, I mean Mac, it shows me and allows.

    but when I remove that put in another system it gives me just a response as it is connected when I go on my computer there is not availble Flash sign.

    I'll be back in fact once to the top of my Flash on Mac. When I got to that obtained in another system just Visible or disabled this system. Please someone who has the solution, in particular among providers of HP.

    WKhan wrote:

    I have a few problems with HP Flash I do not know the * beep t. when I put in the other system, I mean Mac, it shows me and allows.

    but when I remove that put in another system it gives me just a response as it is connected when I go on my computer there is not availble Flash sign.

    I'll be back in fact once to the top of my Flash on Mac. When I got to that obtained in another system just Visible or disabled this system. Please someone who has the solution, in particular among providers of HP.

    Hello

    Please provide more information: what is your computer and its operating system? I think

    (a) HP is not a product called Mac

    (b) HP has no any product called Flash.

    As a result, HP cannot be Provider Service of Flash on Mac computer.

    Kind regards.

  • After the last updates of windows have problems with start up and now drivers

    Hello

    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  • Problems with Adobe Flash Player and IE Firefox / Chrome

    Hello world

    This all started with Facebook - good blood... But now I have a huge problem with Adobe Flash Player.  I followed the instructions to remove the program but now I am unable to reinstall.  I disabled the Norton firewall, but any time, I try to go to download the latest version (and earlier versions) for a reason, it is impossible to connect to the download files.  Can someone tell me other places I could try?

    Or give me other suggestions.

    Thank you

    Ali

    Hi ag, here's a thread with instructions to uninstall it and install both IE & Firefox you can follow:

    http://forums.Adobe.com/thread/615004?TSTART=0

    You get Post #32.

    If you have any questions, please report before you start.

    Thank you

    eidnolb

  • Problem with button Flash HTML Canvas document click on opening multiple browser windows

    Here is the code I use. When I click on the buttons, they open a new browser window.

    If I go back to the new buttons and click on them, they open two browser windows.

    If I repeat the process again a click will open three windows, etc. etc.

    It does in 6.1.6 Safari and in Firefox 35.0.1 but it functions correctly - just open a browser by clicking window, in Google Chrome.

    What I'm doing wrong or is it a problem with the browsers themselves?

    / * Click here to go to the Web Page

    Click on the specified symbol instance loads the URL in a new browser window.

    Directions for use:

    1. replace http://www.adobe.com with the desired URL.

    Keep the quotation marks ("").

    */

    this.learnMore2.addEventListener ("click", fl_ClickToGoToWebPage_6);

    function fl_ClickToGoToWebPage_6() {}

    window.open ("http://www.google.com", "_blank");

    }

    / * Click here to go to the Web Page

    Click on the specified symbol instance loads the URL in a new browser window.

    Directions for use:

    1. replace http://www.adobe.com with the desired URL.

    Keep the quotation marks ("").

    */

    this.bookingRequest2.addEventListener ("click", fl_ClickToGoToWebPage_7);

    function fl_ClickToGoToWebPage_7() {}

    window.open ("http://www.apple.com", "_blank");

    }

    Gotcha now.

    I found this thread, can be to the address you are looking for.

    Flash html5 canvas opens several tabs when the animation loop

Maybe you are looking for

  • Boolean part of the cluster

    I have a table of cluster that has a Boolean inside. I need to switch the Boolean value once at the beginning of the case and once after execution of the case. This will indicate what sequence is running. So I have to remove this index value, change

  • type cast

    I have an enum inside a dowhile loop.  The loop uses shift reg to feed back the State following the enum.  Sometimes, I want to stay in the current state of enum (actually go to him).  I'm trying this 'Sub - VI' so that I can keep each increment of t

  • Cannot install update KB951847 error code: 800 b 0100

    I, too, am unable to perform this update, I get the same error.  I am running Vista 32 bit and we tried the following: (1) running checksur (see below)(2) checksur running in safe mode.  Received the error, that he could not run in safe mode.(3) file

  • I will face any hardware problem after upgrade to Windows 10?

    Original title: upgrade Windows 10 I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrad

  • When typing password, cursor does not move & nothing is displayed also cannot get to any other control panel or in the region

    Original title: password I have Win7 I know that my password My computer starts up & goes to the screen where I put in password. I type password but the cursor does not move and nothing is displayed. I can't go to any other control panel or in the re