Problem with playback device?

Similar Questions

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When accessing Skype problems with playback device

  Original title: when you try to use Skype, I have a problem with the playback device and the test of my sound system the reading micro meter is empty

  Hello

  When you try to use Skype it tells me there is a problem with the playback device, I went to the control panel to test the sound system, everything looks ok but the microphone meter is empty. the balance of micro control record is also empty. I think that it shouldn't be a major but a little annoying problem.

  I hope someone has the answer.

  Thank you

  Peter

  Hi Peter,.

  ·         Did you do changes on the computer before the show?

  I suggest you to uninstall and reinstall the Skype application and check if it helps to solve the problem.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If the problem persists, contact the Skype support for more help and information.

  https://support.Skype.com/

• I can't call anyone on Skype, he said only: "problem with recording device" help?

  Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

  You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

• Problem with recording devices and call issues

  Until recently I had a few problems with my microphone on Skype. Whenever I start my PC, everything will be fine, but every time I change the microphone source (from my webcam for stereo mix so I can play sounds in calls) and leave the call, I get weird questions. First if I still have the stereo mix as the source micro fine, but if I change it to my micro webcam when I click on answer call nothing happens and if I call someone it won't fail to connect and it will say: problem with the device registration, which is strange because it has nothing to do with the connection. Also if I change the source to microphone during a call, the call will be disconnected as if I turned on the internet and post something about the sound card errors. Can anyone help?

  I found the problem, clown fish was not working with Skype and it ceased to use the microphone and I thought since I had removed so I don't think that was the problem, but for some reason any, it is been installed, in any case I removed it and now Skype works fine.

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• problem with the drivers for the card microsoft virtual wifi miniport... problems with PnP devices

  He said to reinstall the drivers for this problem, but they don't reinstall... also he says hardware changes have been detected... can someone explain in easy to understand words what the problem is and how to fix it... pleaseeeeee... Thank you... The convenience store said: THERE IS A PROBLEM WITH THE DRIVER of MICROSOFT VIRTUAL WIFI MINIPORT ADAPTER... DRIVERS MUST BE REINSTALLED... it won't reinstall... also: PROBLEM WITH PnP DEVICES HARDWARE CHANGES HAVE BEEN DETECTED? CAN SOMEONE HELP ME UNDERSTAND, IN EASY WORDS, EXACTLY WHAT I NEED TO DO TO FIX THIS... CD-ROM... IM USING A SAMSUNG LAPTOP MODEL NPR 519 RUNNING WINDOWS 7... Thank you... Update on the microsoft Web site says: this DEVICE no IS NOT WORKING PROPERLY BECAUSE WINDOWS cannot LOAD THE DRIVERS REQUIRED for THIS DEVICE (code 31)... im not computer savvy please someone help

  Hi MAGIC,

  It seems that you may need to update your BIOS firmware.

  You may need to contact Samsung for more information, if the update is available for download on their Web site.

  When started this issue is happening?

  You can disable the virtual WiFi adapter, as it essentially works as a tool of development at the moment:

  http://msdn.Microsoft.com/en-us/library/dd815243%28VS.85%29.aspx

  What is the device that has the problem?

  Reinstall the drivers to fix the problem?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Is a person having problems with playback with blocking sequences?

  Is anyone having problems with playback after creating a multicam sequence? This occurred after the recent upgrade.

  Basically, I merged my video files and audio files into one (fine and dandy), but when I tried to look into the window of the monitor or timeline, he would not play! What is the problem? I've done several times before...

  Let me know if anyone knows this.

  Thank you!

  I talked to Tech Support yesterday and they told me to enter all your audio clips in the sequence Ctrl + (secondary click) click on them and press Render and replace. Then, you close app and load project again you. It has worked for me since I went deep into audio original for all sequences of blocking and rendered and all replaced. Apparently, there is a problem in this version on the audio clips in sequences making making them generate this error, but this type of tech support does not explain to me exactly what was going on. Apparently the Render and replace fuction restarts a little audio clip and allows to you to sequence work normally again. Make sure that you apply to the original audio clips of each cam, no to your chopped pieces place in the timeline you edit.

  Let me know if it worked.

  Good luck.

• "Problem with recording device" - with no Microphone

  In short, despite not having a mic that I usually use Skype calls to be able to listen to friends when you play and do stuff in general. However today all of a sudden when we tried it auto-a ended the call with an error 'problem with the recording device '.

  It happens both with echo and simple restart does not solve the problem either.

  Apparently, with the new codec NGC (new generation call), which is now used for all calls from Skype, it is mandatory to have a microphone connected to the computer. Without a microphone, Skype calls will not work.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.