Windows 7 repeated Instal Fail Intel Graphics 4400

Similar Questions

• Cannot install the Intel Graphics Media Accelerator Driver

  * Original title: what is graphic driver install

  I have and HP Compaq that I try to update the driver Intel Graphics Media Accelerator.  The office is currently running Windows 7 Home Premium SP1.  Don't know if this information is necessary, but it has: Intel Pentium 4 3.20 GHz, 2 GB RAM, 32 bit processor.

  The current version of the driver is 8.15.10.1930.  The version of the driver that I am trying to download is 15.12.75.4.1930.  I checked to see if it is compatible with the chipset and is it supposed to be.  The chipset is 945/Pl/G/GZ, Rev A2

  I use Intel Driver Update Utility that is the update of the driver.  I download the driver, but when I try to install, shortly after update Intel says installation failed.  So why can't the new driver to install.  Thank you.

  Thank you to answer, but the correction of a problem.

  I tried for a few hours and several times and I kept getting the message that the installation has failed.

  I stopped by train, posted this message and returned later to the computer to do work.  When the computer has started a black box open during startup that resembled a command prompt screen.  But orders and yes there are commands in the box, were automatic and down themselves. It lasted only a few seconds and the closed box.  This has happened then twice I started the computer.  Then later, when I started the computer I decided I'd give it another try and found the driver had been installed.

  I know that I didn't install it because whenever I tried it is impossible to install.  I can only assume that everything that was going on when the black box has appeared, ran it's own commands solved installation problem and install the driver...

  Thank you.

• Satellite L500 - 1 7 cannot install the Intel graphics driver

  I can't install drivers for my graphics card on my computer. It's a satellite L500 - 1 7.
  You can see his Setup here:
  Manufacturer: Intel
  model: Mobile Intel GMA 4500 M

  On the site of the intel, they said download the drivers on the toshiba Web site but here does not install the drivers.
  During the installation a message saying:

  «This system does not have the minimum system requirements make the installation of the software.» The installation program will stop. »

  I was able traduct by 'the system has not requiered minimum configuration for the installation of the program. The game program will stop.
  I have download this driver:
  12/02/09
  Chip Set Utility
  Intel Windows 7-64 bits 9.1.1.1019 World Wide

  I'm sure it's good drivers, so what could I do to be able to install this driver I need?

  Sorry for my bad English!

  In General, it is always recommended to use the Toshiba drivers only. Toshiba drivers are tested and adapted to work with graphics placed in the laptop. There are also some overheating protection mechanism and damage graphics card.

  If you check this forum, you will find many users with the same problem. manufacturers of graphics cards write on the pages of own download for portable computers, it is strictly recommended to use the drivers from the laptop manufacturer.

  I think that you think that is good driver, but do you also think that s Toshiba driver is not good or not good enough?

• Windows Vista - > 7 install fail - reboot loop

  I have a Dell Inspiron 1545, Vista upgrade using the update of Win7 from Dell.  I used their upgrade wizard first, and he told me to inactivate iTunes, I did.  Regular upgrade disc then proceeded, who has had a series of restarts.  I wasn't sitting there watching all the bars and screen.

  Now to reboot, I get the boot manager with a choice between Windows 7 and the Windows installation.  Win7 displays the logo, then the background with the "Setup is starting Services", immediately followed by a Windows Installer popup with the message "Windows could not complete the installation.  To install Windows on this computer, run the Setup again", OK.  Click OK and it displays "Setup will continue after rebooting your computer", and the cycle repeats.

  On startup, I get only a F2 or F12 option, F8 and other commands have no effect.

  Choice of Windows Setup puts me Windows Boot Manager "Windows was able to start", file: \$WINDOWS.~BT\Windows\system32\winload.exe, status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged.

  Help?

  Your problem has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update KB2729453 install fails.

  Windows Update lists an important update KB2729453. After many attempts to install this update, I get error code 800705B 9 and the update fails.  How can I solve this problem?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, it seems that you are having problems with the updates of Microsoft error code 800705 B 9.

  Method 1: download and install the update manually and check.

  http://www.Microsoft.com.nsatc.NET/downloads/en/details.aspx?FamilyId=6d742523-5f51-4db7-B05F-a9055b36b090

  Method 2: Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Answer to us if you have problems with Windows Update or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• Intel Graphics Media Accelerator Driver? A huge 37.1 GB?!

  I tried to clear some memory to make my laptop faster... and I found that the pilot was the largest. Should I really this accelerator? 37.1 GB is HUGE!
  I tried to uninstall it... but he used...

  I used Yahoo answers, but they called me a fool? I see with my eyes perfect ffs!
  I can send you a proof of an image? I'm worried! What is a hidden virus?
  OS: Windows 7 Home Premium.

  Jun

  Please understand that the file 'install' driver Intel Graphics Media can be this size.  The installation file contains all the files necessary to install the driver files and the control panel 'advanced settings '.   It can also contain the Intel Graphics Media 'help file' and / or user's guide.

• Vista SP2 x 64 install failed with error 80004005

  I tried to install the SP2 for Vista X 64 (KB948465) four times.  The most recent installation attempt failed after
  (1) created a new administrator account and did the following...
  (2) uninstalled CA Antivirus Suite (no other antivirus installed).
  (3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
  (4) installed and run CheckSur (can provide the journal).
  (5) restarted in clean boot mode.
  6) attempted to reinstall SP2.

  In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%.  However, the message then States that the installation failed and the original configuration was recovering.

  I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
  http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services

• Stop windows update to install Nvidia driver version 52.16

  Hello

  Recently, I upgraded the PC of my father to WinXP SP3. It is an old DELL Dimension of 11 years. After installation there is a nagging question that won't stop.

  Windows Update keeps trying to install the following:

  MICROSOFT VIDEO NVIDIA GEFORCE 4 MX 420

  NVIDIA driver version 52.16

  This update is not necessary for the monitor to run.

  So far, my difficulty was to start in safe mode and back the driver.

  Windows Update repeatedly installed this driver. I have

  detailed instructions on how to block this specific update to settle here.

  Thank you

  Dwayne Boyd

  To hide an update in Windows XP, just go to the Windows Update site and uncheck the update and click on the + sign next to it. At the bottom of the explanation expanded the update the checkbox to hide this update become active and can be selected, thus masking the update.

  Then, you need to remove the update from the temporary folder:

  Stop the automatic updates service

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Delete the content of the download folder
  Click Start. Choose run.
  In the run box, type %windir%\SoftwareDistribution
  Click OK.
  Open the download folder.
  Delete all the contents of the download folder.
  Close the window.

  Start the automatic updates service
  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  By removing the contents of the download folder - you have removed all downloaded
  updates.

  Now, the next step would be to configure Windows Update in order to warn only rather than automatically download and install updates. In this way, you stay in control.

  http://support.Microsoft.com/kb/306525

  Click Start, click run, type sysdm.cpl, and then press ENTER.

  Click the automatic updates tab, and then click to select an Notify me but don't automatically download or install

  I hope this helps.

• Update driver for not having Intel HD graphics 4400 days now

  For several days, the update for the graphics card Intel HD 4400 has tried to install every time I sign my computer and failed.

  When I try to solve the problem, I get an error code returned 0 results for "WindowsUpdate_80070103" "WindowsUpdate_dt000 .

  I disabled the update to prevent it from continue to install.  However, he is listed as an important update.  Does anyone have any suggestions?

  Just another instance of Windows Update using a wrong driver update.  It is unlikely that you need to update the driver, but if you want to:

  Click on Start globe

  Find Device Manager by typing device in the box above

  Open Device Manager

  Click on graphics cards

  Right-click on the list for you Intel graphics, choose software update

  OR

  Go to the web site Intel utility driver and download and run it.

• HP G6 1201TX Intel Graphics Driver cannot install

  I checked for an update for the graphics card Intel from my laptop.

  Mobile version: 8.882.2.0

  Version of the HP support site: 8.15.10.2559

  Version of the Intel Support site: 9.17.10.3347

  I use a HP G6 1201TX running Windows 7 64 bit on a processor Intel Core i5 2430M.

  There is also an AMD Radeon 6470 M GPU.

  The site is recommended to use the OEM support Intel driver.

  But when I tried to install the driver of HP, I got an error message saying "this computer does not meet the minimum requirements for installing the software."

  What should I do?

  Hello:

  You cannot update the Intel driver when you have switchable graphics.

  Setup fails because if you manage to install the updated Intel HD driver then the switchable graphics do not work.

  The pilot only you can and need to install is the latest driver for AMD graphics support page and the driver of your laptop.

  Who installs the AMD and Intel graphics drivers for your laptop.

• Error 80070103 - Intel HD 4400 graphics driver

  Separated from this thread.

  This update fails every day (same error) but it started as an optional update, now update the lists as a major (?).  I have tried different sections of MS Help, downloads (etc) looking for an update "Intel HD Graphics 4400 driver update for Windows 8.1" (he keeps taking me to Windows 10 information about download, & the "More information" link for this update takes me for a Virgin MS-Unit hardware support page that says "pilot information coming soon") (, which he said to ~ > 2 mos, now)... but I still just short in my own back to hunt me in circles.  I ran the MS Troubleshooter on Win Update, which Said it fixed a few errors, but doesn't understand well what has been "fixed". The dnld still fail ECode w/same... 80070103.

  I tried to go to the website of Intel itself but for some God-only-knows-reason, even if I put the site in my list of "Trusted" & enable everything (even the non secure functions/EGP/downloads) IE11 won't let me "use" of the site * EXCEPT * I turn OFF Enhanced Protected Mode {EMP} to Trusted Sites... ! I found that turning off this "EPM" will allow many things/sites actually functions work (for example all msg writing functions on this page - usually, it don't will not let me highlight, bold or italic), instead of the entry-up IE & forcing me to re-start/retrieve the Web page, but I'm far from certain that way to use our computer , AND we have been unsuccessful, get a download from the Intel website in any case. (!??).

  In any case, the version of the driver is currently 10.18.14.4264 as dated 04/08/2015 and our screen works well today so I don't feel as if we are in a 'imminent danger '. It would be good to know why * this update is not properly updated (.. .and why EPM causes functions all sites, even it's own *, does not work... but that's another problem [surprise]! ) though.

  Sorry for the long, stretched 'me '. Guess I got a little carried away.

  Kind regards

  Zac

  You will find an updated driver on this page:

  https://Downloadcenter.Intel.com/search?keyword=HD+4400

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• Windows 8 Switchable Graphics Support for AMD Mobility Radeon and 1st Gen Core i5 Intel Graphics

  Since I've upgraded to Windows 8 my graphics did not work at all (only the work aside Intel). This is a problem because it seems that my HDMI port is plugged directly into my ATI card and with it disabled I can't play half of my games or make use of my HDMI port. I contacted AMD and have tried all their drivers but nothing has worked for the past 3 months. They said that, because Intel is a competitor, the manufacturer must release these new driver updates to manage the two cards. I couldn't find anything to help me with this and I am planning to switch brands because it has been a frustrating experience for me. In addition, I can not install AMD Catalyst Control Center because for some reason it does not recognize my card. If you guys could help me find a solution to this problem or point me in the right direction would be great. Thank you.

  ~ Matt

  PC model: HP Pavilion dm4t-1000

  Graphics card: ATI HD5450M & Intel HD x 000 (whatever 1st gen Core i5)

  OS: Windows 8 64-bit Pro

  Graphics device from Device Manager error message: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Changes: upgrading from Windows 7 to Windows 8

  Hi Matt,

  I don't think that HP will develop Windows 8 drivers for your model, but you can try the switchable graphics avaiable to measure on the following link - I would suggest that you read the guide on how to install these drivers correctly.  It is also important to note that the driver signature enforcement is disabled so that these drivers to load, - more details can be found here.

  http://leshcatlabs.NET/index.php/2012/11/catalyst-12-10-WHQL-unifl-for-amdintel-graphics/

  Kind regards

  DP - K

• AMD/Intel Graphics switchable and upgrade to Windows 8

  Hello world

  I know that many HP Pavilion DV6T-6100 Quad Edition Entertainment laptop owners might consider the upgrade to the new Windows 8 operating system platform. DON'T DO IT!

  I just bought and installed the official version of Windows 8 Pro o my laptop Pavilion DV6T, which came with Windows 7 pre-installed. I had followed the whole windows 8 preview of the incompatibility issues with the graphics driver fiasco switchable HP for some time. I decided to wait to install the official version of the new OS when it was released on October 26, 2012. I bought and applied the upgrade of Windows 7 to Windows 8 last night.

  I thought I'd call HP this morning to find out when they have planned out an official HP Switchable Graphics driver update to resolve incompatibility issues that many HP users have experienced after the upgrade to Windows 8.

  • They've said, in no uncertain terms, "they have a driver available for this problem, but switchable graphic users would have to pay $200 for the reader and have their technical support engineers to apply."
  • He also told me, "HP has no plan to release an update to the free rider problem, so anyone who decided to upgrade to Windows 8 will have to pay support of $200 to fix."
  • I got also said, "my warranty does not cover this update, not being hardware related and related software."

  I paid over $1,200 USD for my laptop model HP Pavilion DV6T-6100 CTO, less than a year ago. Switchable graphics on this laptop was actually a selling point for me, as well as many other owners DV6T. I find it a very irresponsible business move for HP handle that many of their customers in this way. No other manufacturer of the laptop charges their customers for updates, while their product is still under warranty. I work in it and I'll make sure that the HP brand is avoided by everyone that I know in the future. HP has ceased to be one of the best manufacturers of PC, regarding their support for the customer, to be the ABSOLUTE WORST!

  Every computer I've ever owned was a HP, but I will never buy another PC of this society, ever! It is a promise that will be preserved.

  Switchable graphics users per HP: HP has a compatible driver Windows 8 update available, but it will cost $200 more than the price you already paid for your computer and its security.

  Hello Asebeba,

  My solution to the problem is neith, supported or recommended by HP.

  It is well known that HP released several categories of patterns DV6t. It seems that they knew they were going to get rid of the graphical configuration AMD/Intel switchable by the end of November 2011. Which is a not keep from seeling as of soon to become obsolete DV6t models that have been do with the soon outdated AMD/Intel graphic switchable setting possible. However they they built a little more of these models after their passage of OEM to Microsft Windows 8.

  This means that it has supported HP DV6t systems with AMD Switchable graphics, which came the same factories that built our systems, but are running Windows 8. These systems have newer versions of the AMD HD drivers that where fate to the DV6t users whose system supplied with Windows 7 pre-installed.  What are these systems including switchable graphics are incompatible with the 'NEW' Windows 8 and windows 8.1 operating system platforms.

  I could give you the exact name of the HP driver for your switchable graphics special configuration that would work flawlessly on your system, but wouldn't you get anything good for me to do. Because of Windows 7 HP Framework installed on your system. You still have questions, try installing updates later than those offered by HP.  HP would also remove any meantion that I would do whatever it is that they offer and which did not come with your system.

  SP59850

  As far as I know the latest AMD/Intel driver is offered by HP which works with systems built by them with Windows 8 x 64 bit preinstalled.

  Merger of Treexy pilot would be required to uninstall all previous versions of display drivers that you have on your system.

  You would also need to disable the Windows 8 and 8.1 automatic update of device functionality. (Go to: settings/PC Info / Protection of the system / hardware / device settings)

  Once there,

  Select: "no, let me choose what to do."

  Select: "never install driver from Windows Update"

  Apply also to the: Action Center settings (settings / control panel / Action Center / change Action Center settings)

  Deselect "Device Software" (Yo can also deselect 'Windows Update')

  Do not worry! Is not disable Windows Update function. It simply avoids messages from receiviing to update your display drivers that work very well. Do these two things also get rid of this triangle of peskyyellow that appears on your display drivers in Device Manager.

  Unistall old drivers display and software. Then, install the latest version of Windows 8 of the package AMD/Intel HD Graphics Driver availible for your particular display configuration. I will also not allow HP Support Center to automatically install the device drivers on your system at this time. In addition, most systems that encounter this issue with display drivers and windows 8 are no longer under warranty anyway.

  You will have no additional problems running, use or configuration of your HP AMD/Intel graphics switchable on your, shortly after you bought, card HP DV6t system with AMD/Intel switchable graphics.

  No Beta Leshcat driver not required to use the only feature you spent all that money for.