Windows 7 Service Pack 1: 99% then default configuration Service Pack, back changes error

Similar Questions

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• whenever I try to certify a document using my E-token brazilin, it appers: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  I would be grateful if someone could help me. Every time I try to certify a document using my E-token brazilin, it appears: the windows cryptographic service provider reported an error. Code: 2148073510. Someone knows how to fix this?

  Problem of this sort occurs generally when the driver that supports your token is not fully compliant with all standards. Some signature applications are mild for some of the discrepancy and you can still use your signature token in these applications. Acrobat is more strict about this.

  Without actually having your token, it is difficult to continue the investigation.

• Windows Installer service is stopped 3 error "the system does not have the specified path.

  Original title: Windows Installer Service is stopped

  When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
  Misconception # 3 "the system does not have the specified path.

  Hello

  Try the methods below and check if the problem persists.

  Method 1:

  I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2:

  You can also try running a Scan SFC (System File Checker):
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

• Windows vista uses pack 2 install error

  Related topics do not help. How can I get this install to work? What I'm trying next troubleshooting has failed. I know that I need this update to pack 2 of windows vista, but I don't know how to operate. HELP ME PLEASE.

  See linkhttp://technet.microsoft.com/en-us/library/dd335038 (WS.10) .aspx

  http://support.Microsoft.com/kb/948465 http://support.Microsoft.com/kb/935791

  Concerning
  DART

• How can I return Windows XP to the color scheme by default after that it was changed?

  I was around to messing around in the Panel and has been in the optio DISPLAY and for some stupid reason, I thought I'd do things look better but in so doing I did so when I type emails or even typing this I can not see what im typing because the color is dark blue.i have windows xp professional

  can someone tell me how to get everything back to colors (default) origianal on-screen

  Thank you and sorry for typing a bad, as I have said I do not see what is typed

  original title: display settings problem

  Charles,

  You can use your OS cd or recovery disk to restore your pc to its previous state of best. You can also check your monitor if it has 'Auto '. Just press it and it automatically adapts to your computers desktop view.

  C Iggy.

  http://support.Microsoft.com/kb/306084

• Update 10 Windows in Windows 7, Premium Pack, back in Windows 7

  I went back to windows 7 using recovery in windows 10 icon as it was less than 30 days from installation. Now that I returned to windows 7, my McAfee antivirus, which is provided by my internet provider does not work. The Internet provider tried to uninstall and put it up again and it still does not work. My internet provider told me there is something wrong with my computer now and I have to take it to a technician. In addition, my computer is slower and sometimes does not respond. Everything worked fine before installing windows 10. Can someone help me please? Thank you.

  Once Win 7 has been reinstalled & ongoing enforcement, how was mcafee failure notice, did you install it through a

  Download from youre provider... Even if it is available, you will need to download & install, this is not a car

  install. Also, coming back to Win 7, & its software, Win 7 has a firewall that runs automatically, mcafee installed usually

  2 firewalls, one also does not work, it must be disabled. Open the Control Panel, open Firewall Win 7. TO

  Disable mcafee firewall, open Add or remove programs, running Win 7 firewall off, open cmd, type: services.msc

  Scroll to the firewall, double-click, redefine properties. You can also view other running services... McAfee may be authorized,

  but with all its services, it's a pc resource drain... Also, win 10 & Win 7 mcafee versions would be different, one

  new installation is required.

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• "Error 1719. Able to access the Windows Installer Service"when you install programs.

  After spending the last week every night trying to get some software installed (and of course the search for remedies in probably all available forums), I let go and post this request for assistance. But first my story:

  I have lived the last week suddenly my Neat Receipts software does not recognize my scanner more. Trying to reinstall the software, I came across the error that Windows Installer could not be started. That's when I started first for solutions. I was surprised how many solutions I found (but more redoubled practically the same thing), but none did it for me. At this point, I was always under the assumption that it is a problem of the Neat Receipts software.

  Then after another night of frustration I could not pass my trial version Office 2010 plus a sort of license error. I was a little surprised that the trial version which abruptly ended without giving me the opportunity to enter a license key (I got wrong), but doesn't bother too much because I liked the product and had noticed last week as well as Office 2010 is already officially released and I decided to buy it. After spending about $300 and a successful upload, I tried to install it.

  And here my saga continues. First I got the message that I couldn't upgrade my trial version and need to uninstall. Uninstall with the uninstaller routine does not work (windows error message install), but I could uninstall it using the Windows-Install-Clean-Up utility. Now, I can start the installation process, but after being nearly halfway through the installation, I again get the error of Windows install the Windows Installer Service cannot be accessed (Error 1719). It is roughly the same error that I got at the beginning, when I tried to reinstall the software, Neat receipts. So, it seems not to be a misapplication of Neat receipts or Office 2010, but a windows problem.

  The frustrating thing however is that after spending all hours searching online for solutions, the only thing I've discovered is that I am in good company (i.e. There are many others have reported the same problem), but none of the solutions work. Just to be safe, do not for get the same Advisor I tried already several times, let me enumerate what I've done so far:

  1. I am logged on as administrator

  2 - I started the Windows Installer service

  3 - I ran SCF /sannow (no problems found)

  4. I not saved and re-entered the msiecec with / opt and/regserver. I did so explicitly for BOTH (!) msiexec programs, one in the system32 folder and the one in the sysWOW64 folder

  5. I tried to repair Windows 7 boot from the windows 7 installation DVD and run the option repair (no problem found)

  6. I tried to pass the parameter registry WOW64 (for MSIServer) from 1 to 0 (I found this in one of the suggested solutions) [and later again back to the original value 1]

  7. I tried to 'force' windows to ignore the msiexec for 64 bit (in the system32 folder) by renaming and by identifying the msiexec for 32 bit 9 in the sysWOW64 folder) and update the path regsever C:\Windows\system32\msiexec.exe \V to C:\Windows\syswow64\msiexec.exe \V

  8 - I disabled my firewall and antivirus

  9 - I did everything above in many variations with reset (both the save option - reboot)

  -in fact, I could do things more I can't remember.

  Unfortunately a recovery is not an option most, because I guess I tried too many things and my view of the possible return is a point in which my computer was already in place...

  I tried to involve as well a representative of Microsoft support explaining my dilemma, but only made e-mail a generic response on this same forum (great customer service!).

  While I was actually pretty happy in the last 4 months with my new Windows7 (and thus Office2010), I am now reaching the point where I fell like throwing finally the towel and kiss goodbye to Microsoft. I was seriously considering to move to Apple before decide me in February favor some cheaper hardware to continue with Microsoft and the new Windows7. But this experience not being able to fix my computer after spending nights in the search for solutions and not be able to get support from Microsoft disgusts me.

  Now I wonder if there is someone out there who could help me out here...

  Of course, the .msi applies only to installers .msi, which was my mistake for which I apologize.  Regarding a clean installation, the fact remains that you have faced this anomaly for several days, a clean install, despite the pain, would be a distant memory now.  This is my personal opinion, not Microsoft, they me disavowed a long time ago, in all cases MVPS have nothing to do with Microsoft, although the price is published by Microsoft, it is awarded for the caregiver, or in this case try to help others.  It is good that I can at least allow you to vent, it's better out there that maintenus kept bottled upward, no matter how hard it seems to fix the problem, it will be resolved in your favor by subsequently, one way or the other.

  In pursuing the side of permissions of things you can try that if you wish.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  See if this program you can tell what is happening with the failure of the Office to install.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  Process monitor Forum
  http://Forum.sysinternals.com/forum_topics.asp?FID=19

  Need tutorial for Process Monitor
  http://Forum.sysinternals.com/forum_posts.asp?tid=13724

  If it was purchased through the Office Online web store?

  If so, you may need to return to this site at http://office.microsoft.com/en-us/products/ click on the link buy Microsoft Office 2010 today.   Then click on the buy now button to your product...  When you arrive on the "Items in your shopping cart" page, look for the link to the FAQ at the top of the page.  Click on FAQ.  When it opens do scroll to 'Customer Service '.

  Customer support

  What is your refund policy?

  Microsoft products purchased through the Office Online web store are eligible for return within 30 days of the purchase date. Taxes paid will be refunded on eligible returns.
  Among the exceptions to this return policy: Microsoft backup CD/DVD are not refundable and are not included in our 30 day guarantee.

  How can I request a refund?

  To obtain a refund for digital product please click here {web page link} to access your order history information. Click the Order Details of the order for which you want to request a refund. Use the option «back»

  When will be the reimbursement of the credit?

  Your refund credit will appear on your credit card within five to seven working days after we receive your letter filled with destruction. If a different payment method has been used, the duration can vary.

• Windows 7 service pack 1 is 18% full and then the error Code is 80200053

  I tried to download and install the new update for windows 7, but I get an error every time. It's Windows 7 service Pack 1 for x 64 systems (KB976932). He gets 18% full and then said he could not be updated. The error Code is 80200053

  I had this exact question and until I went under optional updates and installed the patch KB2285068 (Microsoft SQL Server 2008 Service Pack 2) and KB2488113 (certain day of random reliability), the Service Pack 1 update has failed every time. Once the updates have been applied SP1 successfully installed. I am on Windows 7 x 64. Someone at - there still the difficulty that should give a try.

• Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green

  Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green.

  The only way that I could finally restart, was safe and then I restored to before I installed SP2.

  WinXP SP2 must have been installed more than four years ago.

  If you haven't installed SP2, you could not possibly have a functional application of the antivirus installed so see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista service pack 2 installed 100% then comes back

  original title: windows vista service pack 2 problem...

  So I try to install windows vista service pack 2 and the facility comes to 3/3 to 100% then stops and says that it cannot install and comes back how to fix cela where I can get service pack 2 on my computer?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Service Pack 2 causes the message "Windows install will not be accessible".

  I am running Windows Vista with all the updates installed but Service Pack 2. I uninstalled Service Pack 2 because it was causing problems with the windows installation service. I was unable to install microsoft office update because the windows installer could not be accessed, and Adobe Acrobat Reader could not be repaired or updated for the same reason.

  With installed Service Pack 2, I traveled all troubleshooting for the windows service install. I have a click with the right button on my computer, manage, service and open the properties of windows install. I have activated the service, but still couldn't install the updates Microsoft office or Adobe Acrobat Reader update/repair. I also tried to configure windows install automatic rather than manual when the computer starts.

  I had the problem "Windows install is not be available" for nearly a year. After trying to do a repair Vista boot without result, I uninstalled all updates. The problem disappeared. I decided to install the updates one by one. After you have installed Service Pack 2, the problem with windows install returned. The Service Pack installs completely and then open my computer properties indicates that Vista runs with Service Pack 2 installed.

  Uninstall Service Pack 2 and blocking automatic updates will not install it was my only solution to the issue of "Windows install is not be accessible". I fear that it may cause a security flaw in my computer, however.

  If someone has encountered this problem, and if so, is there a solution to install Service Pack 2 for my windows service install still works correctly?

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves. Composition of such problems, Geek Squad is also infamous for having failed to download/run the Norton removal tool before installing another AV app or security suite! The 'leftovers' Norton may have caused your post-SP2 installation problem.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. display SP2 & install it again). [2]

  TIP: Temporarily disable Sunbelt Vipre Antivirus before installing SP2. If you still encounter problems after installing SP2 again, open a free support by my previous response incident.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  [2] How to hide or show an update of Windows Vista

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft