Windows 7 system can detect the mouse click event

Similar Questions

• How can I control mouse click event (properly) in a multidimensional array?

  Hi all!

  I have a question about the use of the events of mouse clicks in a multidimensional array (or a '2D' table that we refer to them in Java and C++).

  Background

  I have an array of objects of each with a corresponding mouse click event. Each object is stored in a place between [0] [0] and [5] [8] (so a 9 x 6 grid) and has the specific column and thus associated line number (i.e. tile [2] [4] has a 2 line number and a column 4 number, even if it's on the third row, fifth column). With each click of mouse, the tile that is selected is stored in a temporary table. Table is disabled if a tile is clicked that is not a value line or column equal to, less than or more 1 with the currently targeted tile (i.e. clicking tile [1] [1] clears the table is there are no stored tiles bearing the number of row/column)

  [0] [0] [0] [1] [0] [2],

  [1] [0], [1] [1], [1] [2],

  [2] [0] [2] [1], [2] [2]

  (or any column/line contiguous with another tile stored in the array, which means that the newly selected tile must only be sharing a border with one of the tiles of the temp table but not necessarily with the last tile stored).

  Question

  What is somehow clean and tidy this programming in AS3? Here are some parts of my code (although the mouse click event is not finished/working correctly):

  service public tileClick(e:MouseEvent):void
  {
  var tile: Object = e.currentTarget;
  tileSelect.push (uint (tile.currentFrameLabel));
  selectArr.push (tile);

  If (tile.select.visible is false)
  {
  Tile.Select.Visible = true;
  }
  on the other
  {
  Tile.Select.Visible = false;
  }
  for (var i: uint = 0; i < selectArr.length; i ++)
  {
  If ((tile.rowN == selectArr [i].rowN-1) |)
  (tile.rowN == selectArr [i] .rowN).
  (tile.rowN is .rowN selectArr [i] + 1))
  {
  If ((tile.colN == selectArr [i].colN-1) |)
  (tile.colN == selectArr [i] .colN).
  (tile.colN is .colN selectArr [i] + 1))
  {
  trace ("jackpot!" + i);
  }
  }
  on the other
  {
  for (var ii:uint = 0; ii < 1; ii ++)
  {
  for (var iii:uint = 0; iii < selectArr.length; iii ++)
  {
  selectArr [iii].select.visible = false;
  }
  selectArr = [];
  trace ("Err!");
  }
  }
  }
  }

  so, no matter what tiles are clicked, you only added to selectArr?  That is to say, if someone clicks on tiles randomly contiguous or not, what they added to selectArr?  If so, let the way you have it but change contigF().

  If you want to add a tile of selectArr if selectArr is empty, and when the user click on a tile adjacent selectArr, move the push() method to run If contigF() returns true and change contigF() to:

  function contigF(tile:DisplayObject):Boolean {}

  {if(selectArr.Length==0)}

  Returns true;

  }

  for (var i: int = 0; i<>

  if(Tile!=selectArr[i]&&math.) ABS (selectArr [i] .rowN - Tile.rowN)<2&&Math.abs(selectArr[i].colN><>

  Returns true;

  }

  }

  Returns false;

  }

• Errors in 'Speed' while accessing the mouse click events?

  Hello

  I built a software where it has a CVI callback function registered on the Panel. The function tests whether two cases, the first EVENT_LEFT_CLICK and then EVENT_LEFT_CLICK_UP. The user is supposed to keep the click button for some time (~ 1 second), and there is no problem. However, I have found that if by mistake (that users commit often) multiple rapid clicks are made, sometimes the click down the piece of event (EVENT_LEFT_CLICK) of the code is not read. I reduced the likelihood of this problem of the speed setting of double click (on Windows) to the maximum.

  I think that if I could eliminate the double click event, this problem would be resolved almost completely and only limited by the speed at which the processor can update mouse events.

  Hope you understand my problem.

  Thank you!!

  AUTOSOLVED.

  Thanks to a guy who posted his own solution on a Windows forum, to 'disable' the double click. Just change the HKEY_CURRENT registry value > ControlPanel > mouse > DoubleClickSpeed to 1. What makes the double click speed so fast that you can access virtually every user actually simple clicks.

  After doing this, in order to apply the registry editing, I ended explorer.exe running and he raised through windows task screen. However, change, this applies to what I opened the mouse Panel (without change or apply anything from there).

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• Is windows media player can detect the songs that are out there, more than double and remove them, or not add syncing and if so HOW?

  During the synchronization of music files, you have 3 questions,

  1-WHY some said files already added to the device, even if the memory card is empty?

  2-is there a way to configure windows media player to detect songs appearing twice and automatically delete them or just simply not add syncing?  IF Yes please let me know how.

  3-How do you stop sync everything in windows media player when in sync I put only some songs, but it always adds all the music, 5 star music AND photos?  How we prevent that?

  Hello

  Follow these steps and check if they help.

  Step 1:

  You can re-create the database of Windows Media Player and see if that fixes the problem.
   
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
   
  a. exit Windows Media Player.

  
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  
  c. Select all files in the folder and then click on Delete on the file menu.
   
  Note You don't have to remove the folders that are in this folder.
   
  d. restart Windows Media Player.
   
  Note Windows Media Player automatically rebuilds the database.

  Step 2:

  
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
   
  a. exit Windows Media Player.
  
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  
  c. Select the Media Player folder, and then click on Delete on the file menu.
  
  d. restart Windows Media Player.
   
  Note Windows Media Player automatically rebuilds the database.

  With respect to the timing, I would have you read the following article.

  Windows Media Player sync: frequently asked questions
  http://Windows.Microsoft.com/en-CA/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

• Flex can detect the browser close event?

  Is Flex notified by the browser when the browser is closed (or browser tab)? I need to be able to record all the unsaved data in the application until the browser is closed.
  
  Thanks in advance

  Thanks for your reply.

  I found a good example that I followed and got it to work: http://flexblog.faratasystems.com/?p=134

• Near VI if the mouse click occurs outside of the VI

  I want one my VI to automatically close if the user clicks the mouse outside of it (and not within Control Panel).  This behavior is possible?

  If you are a family with the window API/SDK.  Toolbox G can have lets you capture the mouse click event outside the window of LabVIEW (using the window APIs).

  If the survey doesn't bother you, there is an easy approach (see picture):

  

• Effect of slip through the mouse click

  Hello
  I'm new to animations and try to add little in my application.
  
  (1) whenever I am navigating to another page (by a click or a double-click of a node), I want to have an animation - old page to the left and removed altogether and new page will load on the right side.
  Something like a page in ios/android devices. But my request is not for touch devices enabled for now.
  
  Is it possible however javafx 2.x. If so, could you direct me to sample / api proper.
  
  (2) a click of a mouse can be mapped with gesture events. For example - I click on a link/button to the navigation and application takes as a drag event and therefore moves to a different page giving effect?
  
  Thank you

  (1) whenever I am navigating to another page (by a click or a double-click of a node), I want to have an animation - old page on the left path and get removed altogether and a new page will load on the right side.

  Yes, see:
  http://docs.Oracle.com/JavaFX/2/animations/basics.htm#CJAJJAGI (Transitions)
  http://docs.Oracle.com/JavaFX/2/API/JavaFX/animation/package-summary.html (Animation API)
  http://www.e-Zest.net/blog/sliding-in-JavaFX-its-all-about-clipping/ (sliding in JavaFX)
  http://fxexperience.com/2012/03/canned-animations/ (Animation Lib)
  http://gist.github.com/1437374 (effect of drag Panel)

  (2) a click of a mouse be mapped with gesture events

  I don't think it can be done with the public API. One way to do this would be to add a filter on your component layout that uses the mouse click event and generates a SwipeEvent, but SwipeEvent has no constructor - so it wouldn't work. Is there an existing Jira request to create constructors for classes of public events so that this kind of thing could be done. Perhaps you could use com.sun classes or private impl_ API to allow this happen with JavaFX 2.2, but I would not recommend this approach.

  Also, it is best to place the separate issues in separate positions for ease of search, etc.

• My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  You are allowed to change a hard disk with an OEM license

  If you have problems with Activation, which you shouldn't, try this method:

  Try this and take the Option phone hang for a real person explain to the:

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  FAQ of activation to the. link above

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person. mm

  See you soon.

  Mick Murphy - Microsoft partner

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Windows could not automatically detects the network proxy settings

     Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

     (This message is intended for all problem reports)

     Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

     Search for malware, especially using malwarebytes.

     Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

     netsh winsock reset
     netsh int ipv4 reset

     If they do not help, please after the output of a command ipconfig/all-order

  8. I want to check that my windows operating system license on the website status, please informed how to check?

     Original title: according to the license

     The President complied,

     I want to check that my windows operating system license on the website status, please informed how to check?

     I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

     http://go.Microsoft.com/fwlink/?LinkId=52012

     Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

  9. "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

     Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

     I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

     Ron, I have something for you!

     and for all the people who have this problem :)

     Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

     Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

     The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

     Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

     My TV works and looks okay now.

     It actually works!

     the only problem is that it is not in HD

     but there is something