Windows 7 system, do not connect not not BEFSR41 v4.2

Similar Questions

• Get the error this Windows Installer system could not be accessed

  Original code in title: error 1601
  Here is the letter that I just sent to Microsoft Support. This is the last of about 15 or so that I sent them, so the "BOLD" prints.

  ERROR CODE 1601 WINDOWS INSTALL SYSTEM ARE NOT ACCESSIBLE!

  THIS HAS NOTHING TO DO WITH SKYPE. DON'T SEND ME A LINK TO A FORUM. PERSON NON-DU SUPPORT OF MICROSOFT HAS COMMENTED ON SINCE MARCH. NONE OF THE FIXES WE WORKED ANYWAY.

  DON'T SEND ME ANY LINKS FOR AUTOMATIC MICROSOFT FIX - IT. IT DOES NOT WORK.

  DO NOT SEND ME LINKS TO THREE DOWNLOADS THAT YOU ALREADY SENT TO THE WINDOWS SERVICE INSTALL. THEY DO NOT WORK.

  I THINK I'VE NOW EXHAUSTED YOUR LIST OF ANSWERS TO THIS PROBLEM.

  TRANSFER ALL THESE EMAILS TO A CASE MANAGER AND ASK THEM TO CONTACT ME AT THIS EMAIL ADDRESS.

  If you think that the advanced system of care did, then uninstall the software.  If you want a cleaner, try CCleaner (freeware).

  http://www.Piriform.com/CCleaner

  SP2 is located in the "Display" section updated installed programs and features in Control Panel

  It will be installed as day in 2009 if you have it installed as soon as its released.  Look for it under Microsoft Windows updates.

• How to disable the sharing protected by password on a Windows 7 system, which is connected to a domain?

  Hello

  On Windows 7, there is a parameter that allows to enable/disable sharing protected by password. This setting is available via the network and sharing Center > advanced sharing settings. However, it seems that this sharing of password option is not available when Windows 7 system is connected to a domain.

  Is it possible to turn sharing on or off protected by password on a Windows 7 system, which is connected to a domain? If so, how would we go to this topic?

  Thank you

  Frederiek

  Hi Frederiek,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

   

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• Windows Installer, iTunes, Windows Update, system restore not working under Vista

  For the last few weeks, I deal with an inability to install new programs in Vista, and I was unable to open the system or iTunes restore not in Mode without failure.  I can't install the windows updates that were downloaded, nor my laptop (Sony Vaio VGN-CS215J) will close properly.  I tried the system restore and used to let me open for a bit, but now iTunes that no longer works.  Occasionally, when my computer starts, it loads only for blacks and not go any further.  I run Kaspersky Anti-virus and used to run Spybot S & D (which is more open) and can't find anything that will solve this problem.  I can't properly download/install updates http://www.microsoft.com/windows/downloads/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4 and delete the temporary files have not helped.  I don't know if I have a lemon of a computer or what happened, but any help would be greatly appreciated.

  Hello CWilson13,

  Welcome to the Microsoft Windows Vista Forum.

  I would like to ask you a few questions.

  1 > what happen when you try to restore the system to normal mode?

  2 > are you an error when you try to install updates from windows update?

  3 > you get an error during the installation of other programs?

  About the judgment issue please check if you are able to stop the laptop in safe mode correctly. If Yes, then we must verify the issue by performing a clean boot. Clean boot will help us understand if the problem is due to third and put into service or services.

  The steps to do a clean boot is given in this link:

  www.support.Microsoft.com/kb/331796

  You can also download the latest pack of windows install 4.5 and try to install programs.

  The link for windows install 4.5 is:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Regarding the Itunes I suggest to uninstall Itunes and Quick time to the computer and download the latest being and install it after installing windows install 4.5.

  I hope this helps. Please let me know about the results so that I can help you.

  --------------------------------------------------------------------------------

  Kind regards

  Shaolin Roger Thapa

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The ultimate windows vista system will not accept my password

  I would appreciate insight into what, if anything can be done at this stage.  I have not forgotten my password, but the connection does not accept it.  This laptop contains my info from the company.  Nobody else uses it. I'm in deep squat.  The only answer I have rec would support technical (this unit is less than one year and is under warranty) is that all memory has been the subject and the system rebooted from scratch.  If this is true, it's a ridiculous Vista oversite/glitch.  Someone at - it an idea?  Thanks in advance.

  Joseph,
  Thanks for your comments.
  I took the camera to Best Buy and has been remedied in 10 minutes. Through the use of a program that removes the password and allows sign-in normal.  For those of you who read this forum, I suggest strongly two things, first of all, do not use a password.  The Vista program locks after three attempts, and the restart process has no positive effect.  Then call the GS at Best Buy and talk about cure.  The rate was of $29,95 and work is guaranteed.  Technical support Dell cited $129.95 and could offer no warranty on their work.

  Thank you.

• Using Windows xp system will not start - black screen with error message < root windows > missin \system.dll or corrupt. Replace.

  Using Dell Office tried to reinstall from the disc but the system will accept all orders.  Have all the updates from Mcafee and have not had a problem until this morning.  Short of reformatting is there anything else I can try?

  Hi JLudlow618,

  In addition to the issue in question Jose, follow the troubleshooting steps in this document to resolve your problem.

• Windows 7 system does not receive activated shows 20 days remaining for Activation

  We have the KMS server in our environment for activation. I am able to Ping on the KMS server with the host name and IP address. I am able to telnet to the port as well. Suite of things I tried, kindly help to get the fixed number.

  (1) deleted last updates and then tried to activate again.

  (2) uninstalled KB971033.

  (3) I tried to run slmgr.vb /ato (with elevated command prompt / run as administrator). It displays error: failed product activation.

  (4) I tried to run Microsoft Genuine Advantage Diagnostic Tool, it shows the State of Validation as authentic.

  (5) I tried to run the other commands of slmgr as well, but no luck.

  OS version: Windows 7 SP1 64 bit

  Kindly let me know if there are other measures that I can follow.

  Please post your request here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproinstall&filter=AllTypes&sort=lastpostdesc

• Vista system does not see the files that are on a CD of HP, Intuit and others

  CD allows you to install different products does not work on my Vista Ultimate system when the CD has been made by the manufacturer to support Windows and Mac OS.  These CD work in an XP system and a Windows 7 system. I have two optical drives on the Vista system (two allow DVD writing) and installation CD fail the same way in the two discs.

  If I share a CD drive on the Windows 7 or XP System I and then place the CD in the drive, I can see all the files on the Vista system.  Another CD that do not also for Mac OS work well in all my systems. So far, a single CD of Intuit and two HP is failing.

  I made several complete scans of my system searching for virus using two tools each of Norton and Microsoft and can't find anything.

  When I said above fail, I wanted to say that Windows Explorer displays an incomplete list of files on the CD. To be more precise, the list displayed on the Windows vista system does not include autorun.inf or setup.exe. There are also listed things that should not be registered on a Windows install CD. VolumeIcon.icns and background for example. Basically, it seemed something to tell readers that they are on a Mac system.

  Earlier today, I solved this problem. It seems that someone (probably me or my son) XPlay 3 was installed on the system. For some reason, this included a copy of MacDrive. I think that MacDrive caused the problem by making the part Apple Mac of the CD to be the only part that was visible to my system. I uninstalled XPlay 3 and everything works fine now.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 operating system is not listed on software downloads and driver for HP G7000 notebook

  IM using HP G7000 notebook and my OS is vista. I want to install the windows operating system 7, but it is not listed on downlaods software & driver. is it compatible to use the driver from vista to windows7?

  Hello

  Yes you can.

  If you can connect to the internet first, launch the program from Windows Update in your programs menu. It will download and install the latest drivers for most of your hardware components.

  For anything else, you need, you can use the Vista drivers found on your laptop support page.

  You can also read this helpful upgrade guide if you wish.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-Windows-7-upgrade-guide-for-HP-laptops/TD-p/236034

  Paul

• How to find on which device connected to my system does not work?

  I have XP Professional.  Cannot start Windows Driver Foundation-User Mode Driver Framework(Manages user-mode driver host processes.)  In the window 'services.msc' and try to start Windows Driver Foundation, I get the message: "error 31 - failed to start service. A device attached to the system does not work. "Question: how to find on which device connected to my system does not work?

  1. click on start and then click Run.
  2 type devmgmt.msc in the run box and press ENTER. This will open your device manager.
  3. in the Device Manager window, click view, and then click Show hidden devices
  4. develop options in your device manager and see if there are any device with a yellow exclamation point or something that is rare. If you find one, you can uninstall and reinstall the driver for this device, as long as you have the installation for device drivers files.

  I hope that helps!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• System Restore: after rebooting, the prompt window, says the system could not be restored.

  System Restore:

  All the points are there and trys to restore systems and restarts the restore. After the reboot, the prompt window, says the system could not be restored. Any suggestions?

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.