Windows 7 takes ages to startup

Similar Questions

• Windows does not start at startup

  Hello

  Windows does not start at startup, how? "Safe mode or the other).

  Hello

  Are you able to put the laptop press F8 and choose fix my computer?
  If this is not the case, take your recovery disk and try to reinstall the Windows operating system using the recovery disk!

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• Windows update takes too long to find the updates

  I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue

  Hello Darrin,

  Thanks for posting your query on the Microsoft Community.

  According to the description, the Windows updates take a long time to find the updates.

  I suggest to follow the methods below and check if that helps.

  Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Reference:

  Open the Windows Update troubleshooting tool

  If the problem persists, try Method 2,

  Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  See also:

  Problems with installing updates

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 takes forever to start upward

  When you press the power button on my computer starts a black screen. It sticks for 40 minutes until the Windows startup is displayed, and yes it takes forever for it to take. All together, it takes about 90 minutes for my PC to start.

  When I try to load all the safe mode, he does, is to restart my PC...

  What is happening and what should I do?

  Original title: all sudden Windows 7 takes forever to boot...

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to disconnect all external devices and check if it helps.

  Method 1:

  I suggest you to refer to the article and install the fix.

  Unexpected to slow down the process startup or logon in Windows Server 2008 R2 or in Windows 7

  http://support.Microsoft.com/kb/2617858/en-us

  Method 2:

  Optimize Windows performance
  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information:
  How to speed up your slow computer
  http://support.Microsoft.com/kb/2746761/en-us

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• it take ages to download and install flash player

  I realize that for some time, it will take ages to download and install adobe flash player! is there a problem with the server, I just can't install it I use windows 7 and windows 8 in both I have download it but wen trying to install, it starts to install and it is said that it takes time to download and stop instalation what I can do to install flash player? Thank you very much

  Try the offline installation program of http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player-Windows.html #main - pars_header

• My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  First of all, stop plugging him. Then, make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple to arrange for your sent phone service.

• My mouse keeps freezing on me and it can take ages before it starts working again

  I tried defraging, compressing files, to change mouse (makes no difference), I have a lot of memorary. I am at a loss as to what is the cause.

  Hi JeanetteAldridge,

  ·         What is the brand and model of the mouse?

  ·         Did you do changes on the computer before the show?

  ·         The problem occurs with all applications?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Update the latest drivers/software for the keyboard.

  Method 3: Try the keyboard in another computer and check if the problem persists.

  For reference:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• I was downloading a file of 15 GB creative cloud, it takes ages, so I decided to send it by mail. How can I stop the sincere now?

  I was downloading a file of 15 GB creative cloud, it takes ages, so I decided to send it by mail.

  The FAQ is at http://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html#id_74925

  Is there a file size limit?

  With preview Creative Cloud connection, you can upload files up to 5 GB. If you try to download anything more, you can see some unexpected errors.

  With creative cloud site, you can upload files up to 1 GB. If you try to download anything more, you can see a few unexpected download failures.

  ^ Ani

• How long does take to install the creative Cloud Desktop application? It seems to take ages?

  How long does take to install the creative Cloud Desktop application? It seems to take ages?

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• When you open an attachment in windows mail it seems to take ages to open sometimes up to 5 minutes.

  can you help me

  Hello

  
  1. What is the format of the attachment?
  2. which browser is installed on the computer?
  3. what anti-virus is installed on the computer?
  
  Method 1: Temporarily disable anti-virus and see if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Method 2: Perform the clean boot and see if the problem resolves.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  http://support.Microsoft.com/kb/929135

  
  Hope this information helps.

• Pavilion dv6700: Pavilion laptop computer under Vista: Windows does not start, the Startup Repair cannot fix it. What to do next?

  Hello
  My laptop seven year old made me proud til yesterday, but now it does not fire upwards. Instead, it hangs for a minute or two (black screen, no HARD drive light blinks, nothing), while it charges to a screen with two options - either start the system restart or start Windows normally. The second option takes me around the loop again. The first option tells me that it cannot fix the problem automatically. When I display the error details, it lists all of the tests, as adopted successfully, but ends with the words: "Root cause found: failure so that the Setup program is underway.

  I'm sure I know why she fell: two days ago, I left all my files on a portable player and defragmented the disk. The idea was to speed up the machine and get it running like new. He immediately started to hang when connecting, so I thought, well I'll go for a complete restoration of the system. I followed the procedure using the disks provided with the machine, and that's when it stopped working completely. I felt that this was more than the aging than HARD drive could take.

  My attempts at rejuvenation have actually caused his untimely death? Or is there a difficulty - something I could undertake?

  Or should I just bite the bullet and go and buy a new machine? When everything (screen, keyboard and trackpad) worked so well, it seems a shame...

  Any help or thoughts welcome. Thank you

  If you really want to resurrect, you could certainly purchase a new hard drive and try to restore the system of work using the recovery media - but then, even if it did work, you would have still lost all your data, settings, and applications in the process - and having to reinstall all your applications everywhere again.

  Hey, don't feel bad, I'm guilty of this too - has recently attempted to resurrect an era Tablet XP PC so that it can run Win10!  He went from XP to Vista, Win7, for Win8 - and along the way, gains of new memory and drives hard - but the Win10 bet was too.  So, I got to a "give up to use it.

  However, I also kept a cell phone 5 year alive by replacing the HDD with a SSD and adding more memory.  So now it is faster than ever, it has been and works like new.

  But... He has NO touchscreen, there no USB3 ports, it doesn't have 1 GB ethernet - and the list goes.

  Thus, it works very well for what we use it for - but it can't really be upgraded, so sooner or later, we will have to replace it.

  Everything depends on how much you need 'new' - touch screen, stylus, handwriting, camera, 3 USB ports, display port jack, HDMI ports... etc.

• Windows 7 multi-network at startup

  Hi all, have one him with another OS GREAT being whenever I start my pc, I can't connect to the net because it is showing as connected to multiple networks.

  I have;
  4 wireless modem router ports
  A Vista laptop that connects wireless without any problem
  A pc without card wireless connected with the ethernet cable. This is where the problem is. Whenever I start the pc, it can not connect to the internet because there are several networks. A host and a network, unidentified network.

  I can disable the network card, turn it on and the pc will then connect to the home network and no problems with the net. I tried to delete the network according to the other threads and restarting the pc. This seems to works once and then redisplays the issue of multiple networks.

  I also tried to disable IPv6, did not work.

  Any help would be great that the woman is not too IT savvy and account now to use the laptop while I am not at home, unless I do the above, before going to work in the morning.

  Thanks in advance!

  This is NOT a driver problem or a TCP/IP configuration problem... even if it's a good idea to make sure that you use the latest drivers from your manufacturer chipset.

  Go to the control panel... options and administrative.
  Then 'services '.
  Scroll down and find a service named "Hello service." Double click on this service, and then disable it. Now choose "automatic (delayed start).
  Click OK and then close everything and restart, when you do, your connection network and internet should be good.
  Takes a lot to explain the problem, but it is a service created by Apple that is commonly used in many applications for your network card to configure itself
  automatically to work with certain services. He plays well with windows in general services, and delay automatic startup gives time to windows service to start before its activation to restart the computer.
  I hope this helps!

• Every time I connect to my windows user takes awhile so it starts and then hangs / freezes

  My laptop does not load. It starts normal and when I connect it takes 3 min just to show the wallpaper and just when everything seems to freeze. I get messages like "0xc0000006 failed, something igftray blah blah blah." There is also another for itunes/quicktime "(cela n'arrive parfois, selon si j'ai même arriver à obtenir pour le papier peint. Parfois il se fige/accidents avant) I can boot into safe mode [I am currently in safe mode] also, I tried to go into Device Manager and there is a warning sign next to ISATAP map." Looked this up and stays, it can be ignored. I tried to restore to a previous point, but for some strange reason, it does not show me when I go back. As soon as I click 'Restore' the computer starts and that I need to log in to the screen. \
  Things I've done recently to the laptop: I tried to put in a new stick of RAM, but the computer won't start so I took and how it was left. This may be the problem.
  The computer does not beep or anything. It is not just to load windows. The furtherest I got me I open Google Chrome but then it froze and the screen has decided to go black. Not empty, the screen was always on but he showed all black. Showed no mouse or whatever it is.
  Please help me because I have to take the plane in less than 8 hours and I NEED to take this laptop with me
  It's a Toshiba Satellite a205-s5880, Vista, 2 GB of RAM atm. Aries is for this type of computer I brought it critical judgment.
  * Whenever the laptop freezes / crashes, the sound of the RAM or what call makes a model/beat.
  I know this sounds childish but I have no idea on how to fix computers, so I gave it my best shot to explain what the problem is.
  IF I PUT THIS IN THE WRONG SECTION PLEASE MOVE IT TO THE RIGHT ONE *.
  Thank you very much.

  Hello

  After checking the above and according to the needs:

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I use Norton, but I can't turn the Defender windows manually to change my startup programs

  I was able in the past to close the start up programs with windows defender and Norton was carried out at the same time.  Windows Defender has also failed to take updates Microsoft has recently.  I know that Norton 360 is the protection of my computer, but isn't "defender t suppose always up to date and how can I control which programs load at the beginning? Thanks for any help you can give me.  Barbara

  I was able in the past to close the start up programs with windows defender and Norton was carried out at the same time.  Windows Defender has also failed to take updates Microsoft has recently.  I know that Norton 360 is the protection of my computer, but isn't "defender t suppose always up to date and how can I control which programs load at the beginning? Thanks for any help you can give me.  Barbara

  Norton is a 4 AVs programs (antivirus) which will stop Windows Defender.
  The reason is that Norton has its own advocate. Run 2 defenders in the same machine allows to create conflicts.
  So what you notice is normal.

  As for access to startup programs, defender of the window isn't the only way.

  Start > in the search box, type msconfig > Enter > Startup tab > here is the list of startup programs.

  To disable = uncheck the box in front.
  To activate = check the box opposite.