Windows 7 upgrade problem

Similar Questions

• Windows anytime upgrade problem...

  I can't enter my activation code for windows anytime upgrade, what do I do so that I can the tenant the key correctly?

  What is an Express upgrade or a regular license of Windows 7 Professional?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• 10 Windows 7 upgrade problems - uninstall programs

  I have Windows 7 and want to update to 10. After you download the update, I get a message that I need to uninstall Symantec Endpoint Protection, because it is not compatible with the upgrade. I click on the next button, but then it tells me that I have to uninstall manually and then freshen up before the update. I tried to uninstall manually, but there is no file on the left is. No exe or uninstall files for Symantec. Already, I went in the drive and deleted the last files I could find in Program Files.

  I downloaded CCleaner and another Malware scanning program. No Symantec program was found by the scanner thing that is supposed to uninstall the other antivirus programs. Nothing was found by the Malware scanner. CCleaner does not work with the free keys that I found online, Yes, I turn off my wifi when I try to activate it.

  How can I update to Windows 10? Do I have to remove those programs? I can't find them anywhere.

  Hello

  If you can not upgrade to Windows 10, I suggest refer you to the article mentioned below to upgrade your system to Windows 10 and see if this helps you to upgrade.

  Upgrade to Windows 10 for free

  In addition to this, I suggest to know system requirements and for that you can see the article mentioned below.

  Before installing

  You can also see the article mentioned below to downloaded 10 Windows on your computer.

  Download Windows 10

  You can also refer to article WIKI de Andre da costa provided below and see if it helps you to solve the problem.

  How to upgrade to Windows 10 8.1 for Windows or Windows 7 by using Windows Update

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• Windows 7 upgrade problems

  I have a HP Pavilion (dv7-2111us) laptop with Vista Home Premium 64 - bit that qualifies for upgrade to Windows 7.

  Unfortunately, I want to install 64-bit Windows 7 Professional.

  There is no way to upgrade from Home Premium to professional.

  It is correct.  I understand that.

  So what I want to do is...

  Get my upgrade in Windows 7 Home Premium and install it on another computer.

  Buy a full version of Windows 7 Professional for my HP laptop and do a clean install.

  Question:  How can I get Vista Home Premium Installation discs to install on my other computer so I need this computer to Windows 7 Home Premium?

  Oh yes, my other computer is a machine based 32-bit.

  I think that this should be valid because with the purchase of the computer pavilion laptop, I also buy Windows Vista Home Premium.  I should be able to remove this and install it wherever I chose legally.

  Switching to 64 bit to 32 bit is another problem.

  Thanks for your help

  I hear ya I know; it's just that I thought that I would put is the trouble and inconvenience to get information. Wish you a good day... and if you are a student that is just a suggestion, but you might see if you can get some type of discount for students with a college or something.

• Satellite C70D-B - 30 d - Windows 10 upgrade problem

  Hi everyone, new,

  but bought a PC toshiba laptop c70d-b - 30 d, the thing is its installation running stand everything was going well until I was asked if I wanted to switch from windows 8 to 10.

  I pressed Yes and where it has been for centuries, I have to admit after 3 hours, I thought it was done as screen seemed good, but without testing the performance I closed,

  turn it on again this morning, ready to use, it looked good but would not do anything,
  so thinking, I would like to do a restart and he entered keep your pc until that 1 installation of 1 its been hours now.

  any ideas how I can fix it.

  much thanks for any answers peter

  Turn the laptop off.

  Then turn the power on again and press F12.
  Now you should see the advanced boot menu.
  Here choose the HARD drive recovery
  Then choose the language and keyboard.
  Then solve problems->-> automatic repair of the advanced options.

  It will be useful.

• Acer Aspire Z5610 all in a Windows 8 upgrade problem

  Hello.  I updated my Windows 8 64-bit pc and it works brilliantly except tuner AverMedia 336 DVB - T is not compatible, so I lost the tv function.  (driver not found, no updates found)

  AverMedial tell me that they do not have the driver - Acer.   Acer told me, more or less difficult, they do not intend to upgrade the driver, my 2 year old machine is not suitable for upgrading to Windows 8.

  I successfully upgraded other machines with two or more Windows OS so I'm angry that my cheap Acer is already obsolete.  I expected more from Acer.

  After having calmed down after this shocking response from the Acer I hope that someone here has found a workaround.

  Any help is appreciated.

  Hello

  Check this one

  global-download.acer.com/GDFiles/Driver/TV%20Tuner/TV%20Tuner_AverMedia_10.2.64.51_W7x64_A.zip?acerid=634614378701095234&Step1=REVO&Step2=REVO&Step3=RL70&OS=ALL&LC=en&BC=ACER&SC=PA_3

  Concerning

• Windows 7 upgrade problem. DVD player does not work.

  I bought the upgrade of Windows 7 family pack (3).  The DVD drive on a PC does not work.  Is it possible to download Windows 7 and use my product key for the Family Pack?  Or can offer you an alternative?

  Can you open the Device Manager and uninstall each DVD player.

  Then, restart the computer and let Windows RE-detect readers.

  Then see if you can access a DVD.

• Pavilion p6 - 2327c Desktop: Windows 10 upgrade problems

  Just found on my computer has 'failed' every update of Windows 10.  I ran the diagnosis of HP, which fixed the error message, but whenever I click Update Windows 10, he told me to provide my email address and they will let me know when it is available.

  Background, my system came with Windows 8, but I changed the appearance of Windows 7, for obvious reasons.  I am concerned, this is perhaps why my system will not download Windows 10?  Also, I found this "computers mfg by July 2013" would have no problem.  I bought my refurb in MAY 2013.

  I also see that my C drive is showing 74 GB GB 918 available and that is in the red.  I have an external HD and would like to get rid of everything I have on the C drive, to get out of the red.

  Any help would be appreciated.

  For my desktop HP product number is H3Z24AAR

  Thank you.

  You can download Windows 10 from here to save waiting. Make sure you do a restore of your current system disk incase you need to go back and windows 10 won't let YOY, as he did with one of my PC. Alternatively, you can test for compatibility first to check if your PC is compatible, as suggested by Nuccii.

  https://www.Microsoft.com/en-GB/software-download/Windows10

• Windows 10 upgrade problem: report say OK but UI not say Upgradible

  running win 7 Professional family.

  Compatibility report says I'm OK and can pass to Win 10.

  But the screen that starts the process there is a compatibility issue and will not

  allow the upgrade. Ideas for what is wrong?

  Try to upgrade manually:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

• X 1 carbon Windows 10 upgrade problem: "it is not compatible with windows 10 display.

  Try to update to W7 (64-bit) to W10 on X carbon 1. W10 diagnostics return with "the display is not compatible with Windows 10." All display drivers are huge downloads and I don't know which one to use. I'm NOT a tech person. Help? Thank you.

  
  

• Windows 10 upgrade problem

  Everything went well until he went to restart, and then I got a blue screen saying that it had to be repaired with a repair of my computer tool

  Digital signature of a file could not be verified

  \Windows\System 32 drivers\Tpmx64.

  Oxc000042B system error code

  All ideas

  Hi Norman,

  To help you with your concern on the error message you got, you can temporarily disable driver signing enforcement in the following ways:

  1. Click on the Start menu and select settings.
  2. Click on update and security.
  3. Click on the recovery.
  4. Click on restart now under Advanced Startup.
  5. Click on Troubleshooting.
  6. Click on Advanced options.
  7. Click startup parameters.
  8. Click restart.
  9. On the boot settings screen, press 7 or F7 to disable driver signature enforcement.

  Your computer will reboot and you will be able to install not digitally signed drivers.

  Note:

  If you restart your computer, the application of driver signing will be reactivated.

  Let us know how it goes.

• HP Pavilion & "Windows 7 Upgrade Advisor came across a problem.

  Windows 7 would work on my laptop (HP Pavilion dv6132eu)?

  So I used "Windows 7 Upgrade Advisor" of the Microsofts. Which caused the error "Windows 7 Upgrade Advisor stumbled into a problem that your scanning devices. Upgrade Advisor needs to be able to scan your devices to determine whether your computer is capable of running Windows 7 ".

  The laptop is probably not good enough for Windows 7, why?

  I assumed, the Upgrade Advisor would tell me, what pieces of hardware is / are not specific to Windows 7.

  In a forum Technet, say, the Adviser is blocked by some HP hardware. Which?

  Best regards, Willem

  My problem has been resolved.

  Previously, the problem with "Windows 7 Upgrade Advisor BETA.

  I waited two months - now, I executed the Adviser again, resulting in "an important upgrade".

  And guess: update Advisor works like a rocket, finishing with a nice report with minor problems.

  So I think that the problem was a "Windows 7 Upgrade Advisor" - problem - not a HP computer laptop-problem.

• The upgrade problem - Windows 7 Home Basic to Windows 7 Home Premium

  I just bought today (10 August 2013) button upgrade to Windows 7 Home Basic Windows 7 Home Premium in Mumbai, India a supplier deemed authorized (Croma). When I tried to update using Windows Anytime update, I get a message that the key is a version of Windows that does not work for Windows Anytime Upgrade. Packing of the key says that its for use in India and I am based in India. What can be the reason?. -Joshi kazadi

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key: https://windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this applies also to the VL (Volume License)-MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Windows * upgrade problem

  I am trying to upgrade my Dell inspiron 1545 (32-bit processor) of windows 7 to windows 8. I have run the Wizard installation installed windows8 and bought more downloaded the software.
  He initially told incompatanle software that to view interested me. I decided to install o t and pressed the button go after a short so they advised me to uninstall the program of my touchpad, ALP I have consented and
  This has been done. The instalation then passes to the point where the wer migrating settings. 27% of a notice that the installation had failied to migrate settings.
  The hierarchical system is back in Windows 7.
  Since then, I talked to the forums and possible solutions from microsoft, which none seems to have had a failure at the same point as me. (27% of migration of settings).
  I hHave uninstalled my anti virus (AVG), password/Banking protection trustee Raport., all startup items, Log me in and Family Tree Maker 2006. I have no other
  drive program that clean install of Windows of engraving.
  I can't locate a fig of newspaper or a facility that would allow me to install the program and produce a log file to help source the cause of my problem.
  Could you please giveme some advice/guidance to help my instalation.
  Concerning
  Colin Bailey

  .

  First, back up your installation of Windows 7;

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Use the Windows 8 Upgrade Wizard to create a bootable copy on DVD or USB:

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

  -----------------------------------

  Boot from the Windows 8 DVD or USB media that you create

  Boot from the media that you created to install on another partition

  : http://windows.microsoft.com/en-US/windows-8/boot-install-partition-media-usb-dvd

  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• After the upgrade to Windows 7 wireless problem

  Hello

  I just upgraded my G70-460US to Windows 7 and everything was going smoothly until I realized that the integrated wireless LAN does not connect to my router. Whenever I try to connect, I get the message "Windows could not connect to . It's weird because everything works fine; Device Manager shows no problems, works of LAN cable, I can turn the WLAN with the button next to the power, I can see the list of available networks and so on. What is even more strange is that my router is currently without WPA or WEP, and again, I get the same message "Windows was unable to...» ».

  So far I have tried:

  -Uninstall the driver for Atheros AR5009, reboot, and reinstall

  -Support of Windows Update to get the latest drivers

  -Check if my router (Microsoft MN - 700) is supported by Windows 7, which it does not match the Microsoft Win 7 Compatibility Center

  -Check if my router is not broken (can connect wireless to my other computer so it is not broken)

  -Reset the router to the factory settings

  -Affecting the security of WPA - PSK, WEP network and secure (message all went the same "Windows was unable to...") »)

  -Uninstall HP Wireless Assistant

  It is an upgrade from Vista Home Premium to 7 Home Premium via the disks to upgrade HP G70-460US. I think there is a problem with the autoconfiguration WLAN service, but I'm not expert enough to dig in. All advice is appreciated.

  Thank you

  vdfsi

  Wow, amazing... this topic saved my day. The new driver to the link did the trick.

  I don't know why HP is not register this driver on their G70-460US page. The disc 'Upgrade HP Manager' provided with the Windows 7 upgrade disk should have updated all the drivers, but that doesn't seem to be for my case.

  In any case, thanks to ken2010 and Daniel_Potyrala.

  vdfsi