Windows 8 don't print a report with Quicken 2006. The message is "the PDF driver is not found.

Similar Questions

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Print PowerPoint presentations with comments on the PDF Pages

  Does anyone know when the fix will be released to fix the problem with printing PowerPoint presentations with Notes Pages to PDF?

  It seems he does not intend to solve this problem. If you need to print a bigger slides PowerPoint 2016 game with pages of notes in PDF format, you can use the Microsoft Print to PDF driver. It works without problem, but the PDF file size will be much larger that that would have been created with the driver Adobe PDF (if we could). If the size of the PDF file is a factor, you can print portions of the PowerPoint document with pages of comments (say-1-25, 26-50, 51-75, 76 100) for the separate PDF files. You can then combine PDF files into one file.

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  Exactly, it would depend on how you have set the referencing of your site, please check the suggestions made in this tutorial:

  https://helpx.Adobe.com/Muse/how-to/sitemap-XML-file-explained.html

  In addition, you can check these:

  http://musewidgets.com/collections/all/SEO

  Thank you

  Sanjit

• I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  I have a new computer with Windows 7 Professional, Office 2007, Adobe XI. I just created a word document and tried save it in PDF format, but the PDF option does not appear in the menu dropdown. Any ideas please? Thank you.

  What is "Adobe XI" - Reader or Acrobat?

  But, "Save as Adobe PDF" is a function of Word, independent of this Adobe software, you have installed.

  

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.