Windows 8 will not detect my network card

Similar Questions

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Windows 2008 R2 guest detects no network card

  Hello

  It's my first appointment with the hypervisor,

  my host is on an IBM x 3400 M2 Server 1 quad-core Xeon with 8 GB RAM

  I did a normal installation of vmware esxi 3.5 (the more recent), I put a static IP address and everything seems fine with the ESXi.

  Then, I created a new virtual machine with windows 2008 R2 server 64-bit edition.

  the installation went fine, but when I started and looked through the console, the windows server does not seem to detect the network card, when I checked in the Device Manager, as there was a problem with the network card.

  one last thing I noticed is the mouse movement is slow on the console of this machine, it gives us a hint that vmware tools have not been installed correctly? I checked with the vsphere client and he says that the vmware tools are up to date.

  can someone help me fix this or point me in the right direction?

  Thank you

  Change the settings for the virtual machine, remove you the current network map, add a new and select E1000 as the adapter type.

• Windows 8 will not detect my graphics (Nvidia Ge Force 555 M)

  I have a Lenovo B520 desktop PC and recently upgraded to Windows 8, since my upgrade, I lost the ability to use my graphic dedicated chip (a Nvidia Ge force 555M), trying to install the drivers for this device, the installer of Nvidia said that it could not find any compatible hardware (Windows 8 had not recognized the graphics card). If someone else is having the same problem or someone knows how to solve this problem, then you would be a great help,

  Thank you
  Tom

  I experienced a similar problem with my motherboard Asus P8Z77-V and a Nvidia GTX 670. I have video output to my monitor, but according to the Nvidia Control Panel, there is no compatible hardware installed, so my games run like molasses.

  In my case, I found a solution that might work for you too. In Device Manager, I noticed that the system for my port PCI Express device had a marker against it, so it did not work properly. For me, the device was labeled "Xeon processor E3-1200 v2/3 rd Gen Core Processor PCI Express Root Port - 0151". Right click on one to select Disable and then enable caused once again my card being detected and everything worked properly again.
  Only problem with the solution above, it persists through a reboot, so whenever I start my computer I have to do. Not perfect, but the best solution that I can find at the moment.
  I hope this helps you
  James

  Edit: I have since solved the problem permanently (fingers crossed) by updating the firmware on my motherboard to the latest version. YMMV.

• Windows 8 will not detect my second monitor.

  I recently bought a VGA splitter to connect my second monitor to my computer. It turns on but it duplicates only (not even as good resolution). I want to use this monitor to expand, but when I go to display and resolution it does not detect the second monitor even after click on detect. Someone has an answer to this?

  A VGA splitter can duplicate only a display. It does not report a second graphics port for Windows, which is necessary if Windows is to recognize two separate screens.

  If your system has a single port graph, you will need to replace your graphics card (or add a card, if you use the integrated graphics card) with a with two or more output channels.

• 5.1 ESXi does not detect my network cards during installation

  Hi I am trying to install esxi 5.1, but during the installation, I get an error not detected no physical network adapter and then abandons the instillation. I know that my network card is not detected until I have install the driver, but I don't know how I can install the dryers to exsi, during the installation of windows.
  

  When I try to search the compatibility guide I get no results.

  
  

  My specs are:
  

  MB: FOXCONN P9657AA
  BIOS VERSION: Not sure
  CPU: Intel (r) Core (TM) 2 CPU
  6420 @ 2.13 GHz
  2.13 GHz, 8 GB of RAM
  Memory: (DDR2 240Pins) (CORSAIR)
  VGA: NVIDIA GeForce 8500GT NX85T256H PCI Express X 16
  PSU: Not sure
  HARD DRIVE: 1 MAXTOR IDE HARD DRIVE 250 GB
  CD/DVD: LITE-ON DVDRW LH-20A1P SCSI CdROM Device
  OS: N/A
  Network cards: OnBoard LAN

  LAN Chipset - Marvell 88E8056

  Max LAN - 10/100/1000Mbps speed

  and a second NIC not sure of the brand, I pulled it on an old PC that I have laying around.

  Thank you

  network Marvell cards is not supported according to the guide of comptaibility

• Windows 7 does not detect a network adapter driver.

  So I just did me install windows 7 since vista 64 bit and I noticed that I had no internet. I did some troubleshooting and he told me that I have no network card driver.

  
  
  How can I fix?
  
  
  He said that my Ethernet controller drivers are not installed.
  
  
  Intel (KBIBX10)
  NVIDIA Geforce GTX 260
  Intel Desktop Board DP55WG

  Hello
  First install the chipset drivers. You can find them here . After installation, restart your system and try to reinstall the lan drivers.

  How to find all the drivers for win7 on the motherboard on the Intel site?

  Enter this link. Choose here in the OS: Windows7, 64-bit-> drivers and below there are all the latest drivers:

  Audio , Lan , Chipset , RAID and CIR .

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Windows 8 will not detect iPod Touch 2 generation

  Hello!

  My problem is I have an iPod Touch 2 gen and when I plug in windows cannot detect it. If I go to post work is not in the list, or if I go to Device Manager, it is still not detected not even in portable devices or controllers Bus USB, but the iPod is charging. It happened after a restored building and now I need to connect it to iTunes, but it does not work. I tried with Windows 7, 8 and 10, and I don't know what to do at the moment. My 5s iPhone works fine with the same computers.

  Please help me, thank you

  Greta

  Hi Tom,

  Thanks for posting your query in Microsoft Community.

  I understand that the iPod Touch 2 connects not with Windows 7, 8 or 10 and I will be happy to answer your query. Let me ask you;

  • IPod Touch 2 appears in iTunes?
  • You receive an error message?

  This could be due to problem of incompatibility with iTunes. Given that iPhone 5s connects without any problems, you can refer to the suggestions provided by Apple in the link below.

  iPod touch not appearing is not in iTunes

  If the problem persists, I would ask that you check with Apple support.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Why my Windows 7 will not find wireless networks?

  My Dell with Windows 7 apparently tried to auto update and no not now recognizes wireless networks? I get the following error codes 80244022 8024001F, 8024402C, 80072ee2, 8024401 b, 80072efd HELP!

  The full convenience store is no problem?

  Hi Kschiess,

  Welcome to the Microsoft Answers site!

  You may need to set automatically detect the parameters of local area network (LAN) for Windows Update can go online to obtain updates of Internet Explorer. To do this, follow the steps below.

  1. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  2. click on Tools , click on Internet Options, click the connections tab, and then click LAN settings.

  3. in an automatic configuration, select the check box automatically detect settings , and then click OK.

  If it does not, follow the steps in the article mentioned below:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/?kbid=836941

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not read my SD card.

  Basically my SD card did not work, whenever I put my SD card in the flash player, it does nothing, nothing appears, I go to "My Computer" and the SD card file is not there, as if there is no such thing as my SD card. My laptop is a Toshiba Satellite, Windows Vista Basic.

  Please help me because I really want to download my photos in my laptop with the USB (I lost the usb plug, so I can't plug it)

  Yes, I never did it hibernate/sleep, I stopped it when I am done with the laptop

  -edit

  I recently solved my problem, you can download this player memory card from its website, http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices <- this="" link="" found="" out="" what="" my="" problem="" and="" eventually="" took="" me="" to="" the="" website="" but="" if="" you="" don't="" have="" a toshiba="" use="" that="" link.=""  i="" did="" download="" the="" memory="" card="" reader="" but="" i="" couldn't="" find="" the="" website="" because="" the="" link="" was="" on="" the="" problem="">

  I hope that was my problem can solve them too! :)

• Why Ms service pack 2 for windows vista will not activate the sd card reader work?

  I tried to read a card to 8 GB using my laptop built in card reader, I found a solution for vista o/s before sp 1 and 2.  Certainly, there is a fix for sp2 computers now?

  Checked on the net and a lot of people may not read their 4 Gb + SD card, especially on laptops.  My implementation, laptop of Acer 9423wsmi, OS Vista, with Texas Instruments PCIxx12 Cardbus Controller.  I just downloaded and installed sp43509 driver from the site Web of Hewlett Packard and Lo, now I can read my 8 GB card!

  I tried to read during the last two years, so your response inspired me to find a solution, even though you did not actually provide a solution yourself.

• Windows 7 doesn't detect SDHC memory card

  Hello

  Just got a new computer from HP Elitebook 6930p with SD card reader integrated with Ricoh R/RL/5C476 (II) card bus controller. I used my Verbatim 4 GB successfully SDHC memory cards in my old machine XP (HP nc 4-mile) something with a SDHC from Microsoft Update.

  The problem is that Windows 7 does not detect my SDHC card when it is inserted. I suspected something similar that I had to do under XP, but I am unable to find new drivers and similar sw patches.

  I tried to uninstall the card reader chip of the Manager of Windows devices as well as all USB controllers (as indicated in an article in this forum), and then restart (so update battery USB), but without success.

  I also got USBDeview sw to see what is happening. It seems that this device (USB 2.0 Flash Disk USB Device) is not connected, drive letter seems fine (G:, no conflicts), device is activated (and it does not help if I deactivate and then reactivate).

  What should I do to have Windows 7 support SDHC cards? It's ridiculous...

  I had the same problem with a SanDisk ExtremeIII 4 GB SDHC. After you install the RICOH Media 2.10.00.04 driver Version, it has been corrected.

  Type: Pilot - storage
  Version: 2.10.00.04 (October 19, 2009)
  System: Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows XP
  File name: sp45112.exe (4.7 MB)
  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45112.exe

  I found it at:
  http://forums11.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447626+1261923676044+28353475&ThreadId=1383223

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• CS6 Adobe Photoshop Extended (64-bit) installed on Windows 8 will not update.

  CS6 Adobe Photoshop Extended (64-bit) installed on Windows 8 will not update. Adobe Application Manager opens with the message, as shown below. I use Kaspersky Internet Security, which I do not know very well yet. I tried to update after disabling the firewall without success. Could someone help me please?

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-update-server-repsonding-CS4.html

  1. Choose Start > Control Panel > network and sharing Center.
  2. Click on change adapter settings.
  3. Right click and disable one or more of the following adapters:
     • Microsoft Virtual WiFi Miniport adapt
     • Microsoft Wi - Fi Direct virtual card
     • Network hosted Microsoft virtual map
  4. Launch Ps, choose Help > Check For Updates.

  Kind regards

  Ashutosh