Windows 8 with WMP 12: problem upgrading security components

Similar Questions

• Firefox 38.0.1 window resized with menu bar problem

  After update to 38.0.1, I have the active menu bar, and I have a problem with the firefox window, changing size when displaying pages. The entire window jitters then I lose the bar menu at the top of the tab bar. at this point, I can't click or enter data into a web page. If I select the border of the window and resize or move the window back to its original with the menu bar size and displayed correctly tabs.

  I also developer of Firefox v 40.a02 it was OK last week I was last updated on 29/05 and now also has the same problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• Can upgrade Windows 7 with purchased temporary license upgrade of Windows 8?

  I currently use the version of the Windows 7 student with a temporary license. I was wondering if I buy Windows 8 upgrade if there permanent license or it will expire as soon as we breathe out my Windows 7?

  Thank you!

  It will be converted to a permanent license. As long as the machine has a qualifying version of Windows, simply.

• Flexible Windows 7 with NIC network problems

  Hello

  I'm having a hard time to set up a Win 7 32 bit VM in lab manager v4.0.2. The virtual computer network cards are identified as 'Flexible' in customer vShpere. Windows itself is not looking for the drivers even after installing the VM tools. If I remove the NETWORK card created by the laboratory Manager in vSphere client and create new as for example, e1000 then Windows allows to identify the NETWORK card but the new NETWORK adapter does not appear in the laboratory Manager. This is why I can't manipulate the network cards.

  I am lookig for a way to change the default NETWORK adapter in the laboratory Manager.

  Thank you in advance.

  Here's an update: I decided to edit the VMX VM template file directly to change the type of network adapter.  I added the line "ethernet0.virtualDev ="e1000"" at the end of the file and saved the changes. ".  After that, I could transfer the virtual machine, turn it on and saw that Windows 7 is installed to automatically correct for pilots.  I didn't cancel the model and published it yet, so I'll report more later to let you know how it goes.  I cross my fingers... It's probably a problem that VMware should take note of.

• Screen of Windows XP with file nv4_disp problem as the problem

  Using a Dell laptop D630 without probs for about 2 years but I received the following message if poster for the first time a week ago...

  'Error message reads... ". "the problem seems to be caused by following file nv4_disp... device driver stuck in an infinite loop."  Technical information STOP: 0X000000EA (0X8A5546D8, 0XB38C9CBC, 0X8A7468A8, 0x00000001)

  Sreen now flickers and goes blank at frequent intervals.  Can sometimes become 5 mins use before it 'not'... other times it will be authorized for more than 30 minutes... but then finally flickers and screen effectively stops.  Takes about 20 to 30 attempts to get the screen to the top when I connect... other times it is just blank.

  Anyone know what I can do to solve the problem.  My computer knowledge is not good... so please don't worry insult to my intelligence.

  Concerning

  James

  Please transfer your question in the Forums XP http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  original title: security

  Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
  	We recommend that you close this webpage and do not make this Web site.
  	Click here to close this webpage.
  	Continue to this website (not recommended).
  	More information If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for. When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com. If you choose to ignore this error and continue, don't get personal information on the Web site. For more information, see "Certificate errors" in Internet Explorer Help.

  Some things you can try:

  You can have old certificates root on your computer.  Try to update your root certificates from the link provided in the paragraph "Root Update Package (intended for Windows XP only)" in the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Depending on which version of Internet Explorer and Service Pack level of your machine, one of the following articles might help you:

  ' "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site.
    <>0 http://support.Microsoft.com/kb/93185>

  "Certificate error Web page is displayed when you try to visit an SSL Web using Internet Explorer 7:"There is a problem with the security certificate from the Web site""
    <>http://support.Microsoft.com/kb/950067 >

  It is also possible that indeed, you will be redirected to a false site.  Check your file C:\Windows\System32\drivers\etc\hosts ensure that there is not a bogus entry for your hotmail login.  Generally, the only line that is required in this file does not begin with a character ' # ' is ' 127.0.0.1 localhost '.

  HTH,
  JW

• IE is slow, hangs in Google, will run Firefox under Windows 7 with speed and security?

  I'm not very tech savy English so good please. I have a desktop Dell Studio with Intel 2 Quad Processer. I have used IE for 15 years and more. Started using Google Chrome for speed and better security about 6 months without any problem. Shortly after the beginning of the year Chrome started crashing every day and from 1/14 he broke the 10-12 times a day. I don't like losing stuff and having to stop, re - load, raise or re-store that Chrome was more than that was working properly.

  Will Firefox work in my system operating system. I loan on your security, password protection and other things that are touted on your website on Firefox, but I'm mostly concerned about accidents and what are the causes. Is the problem in my own system and not questions of brower?

  I just want to surf, read, watch you tube, facebook with friends and family. I am 65 years old and retired, and I'm really disguested with all the problems I encounter.

  I think Firefox is a good product, but I need answers to the questions I asked.

  We hope to hear from someone very soon on the issues that I raised. If I download Firefox, should I uninstall IE. I already have an installed Chrome =.

  Thank you
  Jim Yeary
  jyeary3 @ spring TX

  I do not know what is causing your Chrome or IE falls down, but you can give a Firefox. I'll give you a few different things you need to do before installing Firefox to make sure that your computer works well if.

  Install all Windows updates. Check several times until there is no more.

  Update your graphics Driver. Update your graphics drivers to use hardware acceleration and WebGL

  Scan of malware: troubleshoot Firefox problems caused by malicious software

  Once you have done this, install Firefox! How to download and install Firefox on Windows

• Pavilion DM1: Problems upgrading to Windows 10 on HP Pavilion DM1 Notebook

  The portable computer is currently running Windows 7 Professional, and I ran the upgrade of Windows 10.  It goes through the first installation and re - start and then on the second phase, when it is installing the drivers, it gets to 71% and restarts with a blue screen, I think that showing as TENT RUN OF No. EXECUTE MEMORY, but it is not very long, so I do not know and rolls to Windows 7.  I tried to disconnect external devices, try a clean boot, tried to update all the drivers, disable wifi and leaving on a single connection to the local network without success.  I managed to last updated desktop for Windows 10 with only a little difficulty even if Windows has decided the display driver is not compatible, so it is a real headache.

  Thank you. No, Kaspersky has not been installed, and I never installed it. Is used by McAfee, as sometimes it comes with Acrobat Reader? I installed once in an update and it removed immediately. Anyway, I found this file registered twice in C:\Windows\System32\Drivers and in a subfolder, it was not related to any existing process so I removed it, tried the upgrade again and he completed this time. If for any other person having this problem find the name of the file after ATTEMPTED RUN OF No. EXECUTE the MEMORY when the blue screen appears, which is very short and then delete this file. In my case it was kl1.sys. It was not however reflected in the report which appeared after system restored to Windows 7. Problem solved.

• problem upgrading to Windows7 Windows XP Professionalge.

  Hello everyone and happy to be here. I have a problem upgrading to Windows7 in Windows XP Professional. I have a Dell E510 while upgrading to Windows 7, I have reached the installation window and my complete system each item listed with a check mark next to: (copy of Windows files), (gathering files, settings, programs), (extension of Windows files). reached 27% full. I get a massage from windows restarts now... The computer does not restart. He asks me to press any key to boot from the CD. Once it goes to that, a window pops up that says "Windows starts now." It is not to go further than that. I release the CD and turn off the computer. When I restart again, a window prompts you to say 'start from the old system or windows put in place. " If I press windows set up, it does nothing. When I press on the old system, it restarts in Windows XP, and then a window invites you to tell me 'the computer started on your old system. It would not be upgraded. Contact Microsoft. This is getting very frustrating. I installed the Windows 7 DVD on my other HP computer without problem. But when he asks me to press any key to reboot from dvd and you do. There is no that start the installation from the beginning. "Collection Windows files, them"start windows"and them it is he don't, don't go anywhere." Can't someone help please? Thank you and I appreciate the help.

  Do not touch the keyboard when you are prompted to "Press any key", sit and wait Windows to continue the installation. Also did you select the 'custom' and not the 'Upgrade' option at the beginnng of the installation process.

  J W Stuart: http://www.pagestart.com

• validation problem Windows media with the validation site player

  Im having a problem with my windows media player 11 validation, ive done just a system restore, but I did this b4 and had not had this problem.when I push validate take me for this web site validate/ValidationResult.aspx? displaylang = in & cCode = NZL & Error = 10 & PageName = validate & Product = Wga nothing happens? Ive waited more than an hour 4 to load snack is one of those slow loading pages, but still nothing? Please help me solve this annoying problem. thnx :)

  Hi Traci,

  (1) how long have you been faced with this problem?

  (2) is this problem limited only to Windows Media Player (WMP)?

  Method 1: see the steps provided by Jeremy K who solves a similar problem on Windows Media Player 10

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/DCOM-congiguration-warning/403fb8c9-b55f-E011-8dfc-68b599b31bf5

  Method 2: Uninstall and reinstall WMP

  How to uninstall Windows Media Player 11 in Windows XP

  http://support.Microsoft.com/kb/934372

  Download WMP 11

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  On the problem of validation, you can also post your request here

  Windows XP Genuine Advantage Validation

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

• Difficult problem upgrading Vista/Windows 7 for anyone who dares to try to help me to solve it. PLEASE HELP ME UNDERSTAND THIS!

  My computer is a few years old, but has always been a good thing. I have a Gateway P6831FX laptop. It came with Vista pre-installed, but also many devices hardware upgrade card high quality graphics, monitor, sound system, etc. because it was built for the high-quality games.  Unfortunately, my OS system crashed and the computer did not come with recovery discs (gateway said that I should order the discs on their part and that I had to pay for them. Which shocked me because when I bought the computer I paid for a license to the BONE so you would think they would send the recovery discs I free).  However, I recently bought a disc to upgrade to windows 7 because I was planning on upgrading my system before it crashed.  So with a computer, I couldn't use, I thought that I had nothing to lose and I decided to try to load my system windows 7 on the computer.  I put the disc in the drive and load windows 7 with no problems at all.  I don't know if I've checked all the right boxes when he asked all sorts of questions, but my big computer worked when I was tired.  I had to go online and download the driver for the webcam to webcam would work once again and I lost all programs preloaded but other than that everything seems to work fine.  But then all of a sudden the sound no longer works.  I turned off the computer and turn it back on and the sound was back on.  But a few hours later, the noise stopped working again and it keeps going.  It is when I reboot it, but it is becoming a chore.  I decided that I would try to fix it and I went into the Device Manager and I discovered something to worry about. All original equipment upgraded in the computer is no longer registered.  All that was there was listed as generic devices Microsoft and number of manufacturer information and model said: not available. The monitor, for example, is listed as 'No generic PnP Monitor'.  Everything updated, so that I paid extra watch now simply known as generic peripheral windows (with a date of installation date that I loaded windows 7).

  Is there anyway to retrieve the updated materials and programs without having to order and pay for the vista recovery discs?  If I have to, I'll have to erase windows 7 then reload vista with recovery disks and then reload again the upgrade to windows 7?  However, one thing that baffles me is that when I pull my hard drive it shows that I have 2 here.  It shows 1 Partition (C) and (D) recovery so I think that my original vista system with the hardware upgraded and programs is still in my computer somewhere in the recovery disc (D) but I can not understand how to access and I tried.  And if for some reason any I can never access or recover, I would like at least to remove it because it takes up a ton of space on my hard drive.  If anyone can understand what I'm trying to say here, that's where somehow you can help me understand cela stuff?  Thank you for your time.

  Hello

  Gateway put a recovery Partition on your hard disk to reinstall Vista from rather than providing records.

  It's the way it's done now and you are also supposed to make recovery disc from it, that you can not do until you reinstall Vista now.

  If the recovery Partition: D still works, we do not know as you have installation, etc. on this laptop.

  You need to try.

  Reinstall Vista > and then upgrade to Windows 7.

  .

  Here is the information on the bridge for learn you more about reinstalling Vista.

  Full factory for the gateway restore, which you will always be able to use...

  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml

  And once you reinstall Vista you go to the site of the bridge or from the hardware manufacturer (that you upgraded material initially) Support Web site > download drivers and software Section > equip your laptop model number or the hardware and operating system > and download the latest drivers for the notebook hardware.

  http://support.gateway.com/product/?cmpid=supportnav

  And also when Windows 7 is installed then you will need to go to this same site gateway or the hardware manufacturer (that you upgraded material initially) and download the latest Windows 7 drivers for it also.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the recovery partition is damaged ask gateway if they provide the disc of recovery for you.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  p.s. That's what you should have done before you start the upgrade to Windows 7.

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• When is windows going to solve this problem with the download of kb2538242?

  When is windows going to solve this problem with the download of kb2538242?  Whenever I turn on the computer, it downloads and installs this update.  It says it is installed but the next time I turn on the computer it downloads and installs again slow down my computer until she gets.  When I hit the kb2538242 in bing it says windows will have a fix within two weeks.  Why so long?  Isn't windows discover these things before posting updates?  I use Vista, with Intel 32-bit processor.  What can I do about this problem or I have to wait on windows.

  George,

  You must contact Microsoft, don't wait until they release the patch.

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  -=-

  1. click on the "Start" button, click "All programs" and click on "Windows Update".

  2. in the left panel, click "Search for update".

  3. after receiving the results of the analysis, please click on "View available updates" under the "Install updates" button

  4 Please right- click the update (KB2538242), and then click "Hide update".

  06/19 / 1109:56: 23:00

• Cannot upgrade to Windows 10 due to the problem of electricity

  * Original title: update problem

  I am currently using Windows 7 Professional sp1 but I can't upgrade my country turning on (power problem) and pauses for a long time so I just want to know can I use windows 7 pro key on windows 10 pro sp1 to make true please help me as soon as possible

  Hello Pierre,.

  Yes, you can use your windows 7 key provided that you have the latest edition of windows with the November 10 update. Old edition published in July would not accept key of Windows 7.

  Make sure you only download correct edition of Windows 10 with correct language.

  I hope that you are not the India, because I think that there is now much less powercuts