Windows 80070584 for Vista error code

Similar Questions

• Failure to update Windows 8 for the error Code Windows 8.1 - 0xC1900101 - 0-x 20040017

  iBuypower CZ-27

  Intel i7 4700MQ 2.4

  16 GB OF RAM

  1 TB HD

  128G SSD

  NVIDIA GTX 770 m

  Windows 8 x64bit

  A to the factory restore update my PC after an Avast anti-virus on reboot it crashed. I did the factory reset and installed the drivers directly from ibuypower.com via the USB port of my specific model. A driver could not install [ACPI/ENE0110] which appears as unidentified driver. I know that Nvidia GPU cause problems, so I made the driver is up-to-date. I don't have a program of keyboard/mouse Steelseries which is not supported by 8.1, and TrustterRapport. I don't have ESET anti-virus (although I have avast).

  I tried to disable all non-microsoft startup programs as suggested in a previous post that make me the problem [not even system partition] (I forgot the whole sentence) message.

  I really am having problems with this and am also looking for a solution to this unknown device driver.

  If anyone has any idea please help = ((un propriétaire de PC tous ma vie et ne voulant pas laisser ce problème dans la voie de mon bébé et moi; p))

  Thank you very much!

  Shifted

  Hello shifted,

  Welcome to Microsoft Community forum.

  This error indicates a boot failure Windows 8.1 has occurred during the final parts of the update, System Restore Windows 8.  The most likely cause of this error is a material defect or incompatible driver. Unfortunately, due to the timing of this failure, there often are no newspaper, dumps or other diagnostic information available to study the question easily, making it difficult to determine which, if any, of the system or components drivers cause the update fails.

  For more information I suggest you follow the suggestion provided by Madeni K N replied on 8 January 2014 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6

  If you are unable to upgrade to 8.1 Windows after trying the steps in the thread that above, I suggest trying the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards.

• Vista - cannot install updates for Vista, error codes: 66A and 80070645

  I tried to download and install the update to Windows Update (KB979906), (KB959209) x 86 (KB963707), but I get these Error Messages 66A and 80070645.

  I tried to download them and install them individually.

  Hi Ajay

  THX.

  Not quite right, but use a fixer of framework and re-installed the frame individually. Now, the automatic update works again.

  Ergjam.

• Windows Update for vista, error "WindowsUpdate_80004002" "WindowsUpdate_dt000"

  Does anyone have a proven solution.  I tried everyting outhere for a week, and all were false.  I tried to download the package sp2 only support, the update of the registry, the windows, the fixit Update Setup, everything, blah blah blah.  I tried and frustrated that microsoft hasn't all ready put out a patch for it.

  Stephen these corrections are among those included in the links I posted. Just a heads-up. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Windows Mail for Vista - error when you try to delete e-mail messages

  When you try to delete all the emails in the in the folder, a message "error" appears, it is impossible to delete messages after choosing 'select all '.

  Try to compact and repair the database with this tool.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

  I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding
  
  Windows can't check for updates, error code 800FFFF.

  I tried some of the recommendations varied on this site, but so far without success.

  If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

  I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

  I checked for malware and repeatedly tried to system update readiness tool.

  Any thoughts?

  Some information on my system:

  OS: Vista Edition Home Premium
  Version: 6.0.6002 Service Pack 2 Build 6002
  Model: Inspiron 1525
  System type: X 86-based PC
  Processor: Intel Core 2 DUO CPU
  The version of the BIOS/date: Dell Inc. A16, 16/10/2008
  SMBIOS Version 2.4

  Hello Jason.

  I suggest you try the following:
   
  close and exit all the open documents or windows program you have open.
   
  Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
  [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
   
  Note => for best results, check the option to remove personal settings.
   
  NEXT
  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
   
  1B. make disappear/close the pop-up window "automated troubleshooting! -then...
   
  c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

  2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
  When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
   
  If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
  Those that are marked as "optional" decline.
   
  Have infinite patience so that it scans and it's work.
   
  When you are prompted to restart Windows, please do. Allow it to restart.

  If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

  Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  Here is an answer which is marked as an answer to the error code 643.

  I also participated in that thread, and I gave my suggestions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update 8007371 B error code «»

  I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

  Try:

  Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

  The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.

• When you try to install multiple Windows updates, receive the error code 646

  * original title - Hello, __i am facing a problem with the installation of the updates of the IMP... It is 646.plz for the error code help showing me in their fixation... *.

  updates are
  1 security Update for Microsoft Office Excel 2007 (KB982308)
  2. security Update for Microsoft Office InfoPath 2007 (KB979441)
  3. Update for Microsoft Office PowerPoint 2007 (KB982158)
  4. Update for Microsoft Office Publisher 2007 (KB982124)
  5. Update for Microsoft Office Word 2007 (KB982135)
  6 security Update for Microsoft Office System 2007 (KB982312)
  7 security Update for Microsoft Office System 2007 (KB982331)
  8. Update for the junk e-mail in Outlook 2007 (KB983486) filter

  Add: See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  Vista: http://windows.microsoft.com/en-AU/windows-vista/Turn-User-Account-Control-on-or-off

  Disconnected from the internet can help to install the updates.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft