Windows defender error "windows cannot find «c:\program files\windows defender\msascui.exe"»

Similar Questions

• Error message after you initialize computer error "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again.

  After that I turned on my computer, I get this error message... "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again."

  It all started October 1, 2014, and I have no idea why.

  I asked windows assistance online, and he said he had something to do with my registry.
  But then there just stop communicating and did not tell me how to solve this problem.

  Y at - it a registry repair tool?

  Also it does not affect my computer that I can tell.

  But I have a problem in which windows cannot detect.

  In the printers and devices window, the icon of my computer has a triangle with an exclamation mark inside error.

  Maybe someone out there not and I'd appreciate any help.

  Hey, mark

  First have you properly uninstalled this program? He was executed at startup of Windows an incorrect uninstall may cause this error may still be registered in MSConfig to start automatically with the computer.

  Did you go to the address specified in Program Files (86) \Search Extensions to see if the file is present or not?

  With a mark of exclamtion in the middle of a yellow triangle indicates that drivers must be updated.

  Right-click on the device with the triangle, select Properties, go to the Hardware tab, select the device with a triangle next to it, select Properties again and select Update driver.

  This should solve the problem, if Windows Update can't find a driver for you, you can always go to the manufacturers website and download it there, however, if the Windows Update does not find it there ' has a chance to the manufacturers Web site may not it as well, in this case, you can open Device Manager right-click the missing material or using outdated drivers, select Properties, go to the Details tab and in the hardware id select menu drop-down property search with id, you receive information about the device and so download the drivers the most up-to-date and appropriate from other reliable sources.

  Thank you

  -Robin

• Error: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again at the start of Windows 7.

  Original title: Windows cannot find "C:\Program Files\Common Files\LogiShrd\CDDRV3\LDConfig.exe." Make sure that you type the name correctly, and then try again.

  This error keeps showing up in when I connect to my pc. How am I able to fix this? It's really annoying. Please help me.

  Its a file/utility Logitech and nothing to do with the victory

• Tried to reinstall Windows7 and received error: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe".

  I am running Windows7 Home Premium and something happened to my computer not allowing me to run some of my programs, we get an error code, for example: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe". Make sure you typed the name correctly and then try again. "After several attempts to reinstall these programs with no solution, I tried to reinstall my OS.  After that I introduced my key code a message came up saying I had to rebuy a keycode to activate Windows 7. a black screen came and another message says that my version of Windows was not authentic and my OS was not fixed or reinstalled. What can I do to fix this problem without buying a new key code and spend a lot of money that I don't have? I'd appreciate any help you could give me!

  I have to reinstall my operating system using the custom installation available on my drive; However, I lost everything and had to reprogram all my files, folders and programs; but at least it didn't cost me another $109.00 for a new code. Thanks anyway

• Error message states that windows cannot find "C:\program files (x 86) \internet explorer\iexplore.exe"

  I get an error message when I try to open internet explore and I get in safe mode as well... He said windowns cannot find "C:\program files (x 86) \internet explorer\iexplore.exe someone help me please!"

  Hello

  x 86 is 32-bit operating system

  and the 64-bit vista 32-bit and 64-bit browsers explore included

  The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

  There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

  This is the title of each and they run exe:

  Internet Explorer
  "C:\Program Files (x 86) \Internet.

  Internet Explorer (64-bit)
  "C:\Program may Explorer\iexplore.exe.

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• unsolicited to pop up "Windows cannot find ' C:\Program Files (x 86) \Search»»

  Nearly a week there is a window began to appear during the first load of my computer. It's a black rectangular window marked taskeng.exe, but there is nothing in it. Almost immediately after that, a prompt appears that says "Windows cannot find ' C:\Program Files (x 86) \Search Extensions\Client.exe".» Make sure you typed the name correctly and then try again. ' It opens at the beginning, until I typed or even clicked on anything yet.  When I click 'OK', it closes and my computer works normally, a little more slowly than usual. It does not appear to be a problem, but I don't know there could still be something wrong that I can't see or know something about.

  I watched taskeng.exe and I understand that it is a task manager, but that it could be related to malware or a virus when it ceases to appear. I did a full scan of the disk C with Malwarebytes and, thankfully, he said I have no malware to remove. I do not understand why he started coming. I did a system restore, but nothing has changed.

  Can someone help me understand what it is and how to stop it without risk to occur?

  Thank you, Kateri

  What has happened is that your software antivirus or antimalware software correctly identified as a spam and removed program client.exe.  In this case, however, there often remains of the malware left behind this attempt to leave the now-missing executable malware.

  In your case, it seems that there is a scheduled task that tries to launch client.exe.

  • Click the start ORB, type the following command in the start search box and press enter
    Task Scheduler
  • When the Task Scheduler window opens, click on "Task Scheduler (local)" in the left pane
  • Use the scroll bar on the right to scroll down to "active tasks.
  • Use the inner scroll bar to scroll the active task list to find anyone trying to launch Client.exe.  Search for "C:\Program Files (x 86) \Search Extensions in the"Location"field

    

  • When you have found the ticket with Extensions of research in the location field, double click it.
  • In the right pane ("shares") find "Delete" at the bottom of the list and click on it.
  • Close Task Scheduler and restart
  • You should not get the popup more

  If this does not work, or if you do not find the right task to remove, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx -->

  • Run Autoruns and once the analysis is complete, confirm that the "all" tab is selected (it will have to use it) then click file > find and search for client.exe
  • If a line with client.exe is found, make sure the 'Image path' set to C:\Program Files (x 86) \Search Extensions and then clear the check box at the left end of the line
  • Press F3 to search for other instances of the client.exe (I don't expect there to be no)
  • Autoruns to close and restart
  • You should not get the popup more

  If you've used autoruns, if you are convinced that the problem has been corrected and no problem has been introduced, you can run autoruns and this time 'remove' the line with client.exe inside.

  I suggest also using Windows Explorer to go to C:\Program Files (x 86) and verification of the contents of the file Extensions of research.  If it is empty, delete the entire folder.  If the files remain, are also likely to remnants of malware, but I won't tell you to delete them without knowing what they are.  If there are exe files, use your favorite search engine for names of files of research (or post the list here).

• Windows cannot find "c:/program files/.../programm.exe." "Make sure you typed the name correctly and then try again", I cannot run programms like Admin, what to do?

  I have a problem at the opening of the software as administrator, whenever I open a programm (programs that require admin privaleges) says "windows cannot find" C:/Program Files/.../program.exe". Make sure you typed the name correctly and then try again. "(THIS HAPPENS FOR EACH PROGRAM) I am the only user, also, I am the administrator, I also have another problem, when I run the control panel and try to change something it will not open the box (I wanted to know if the parameters are wrong), when I click, it is as I have not clicked at all, even in SafeMode im helpless There, I can't even change my account settings and run sys restore, but I can open the program (I scanned it are malwares and viruses, but nothing was found, my computer is clean), pls help me, any advice would be very appricieated. I defragmented, managed antivirus analysis I did everything. I've used software: advanced system care, safety 2012 AVG, Malwarebytes anti-malware trial. Sometimes, when I want to uninstall something safe mode (only there, I can do something) I get the message that im not allowed to uninstall the software.

  Still having the problem? Were you able to run SFC in Mode safe?

  You could try a repair of Windows 7 installation or if not a clean install.

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• error message "cannot find the image file: $lib/Textures/Fields.png.

  Hi, I work on a PC with windows 7, first cc 2015.4

  Today, I installed red giant universe. Some features did not work and gave me an error that it cannot find al sorts different image files.

  now I try not to use any od red giant plugins and I still get the above message.

  someone has an idea how solve it?

  Contact Red Giant.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• "Se error message" cannot find the < required > file in the < place > during Internet download

  Original title: I'm not able to save my downloads of web due to change in a techniical framework. What should I do?

  the message that I get while opening the download is described as under .pls try n help as soon as possible cos all my work is on hold.

  
  
  
  
  Cannot find the file in the
  
  
  
  
  
  

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below, if Internet Explorer is installed on the computer.

  a: Open Internet Explorer.

  b: click on Tools > Internet Options.

  c: Then click on the Security tab.

  d: then click on the custom level button.

  e: Now navigate to the downloads section.

  f: Then select Activate for the download file option.

  g: then click on ok > apply > ok.

  Hope this information helps.

• My lightroom does not open. I get an error message saying "windows cannot find"C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe". Make sure you typed the name correctly and then try again"when nothing is irrelevant.

  Please help me. I uninstalled all lightroom related and reinstalled and nothing works!

  Hi noelc,

  This is related to the problem of association of files on the Windows platform. Other applications works very much like Photoshop.

  Please completely including current uninstall Lightroom and the old version of it.

  Restart the Machine (very Important)

  Reinstall the application from Creative Cloud Desktop App (disconnect & connect away from getting the latest version of Lightroom)

  Kind regards

  ~ Mohit

• How can I solve this problem starting? Windows cannot find C:\Program Files (x 86) avt\bin\kdbsync.exe AMD?

  Hit start, click OK and it goes away. What should I do? Windows 7, ADM, 64-bit.

  Its a utility amd, probably installed via your cd of the motherboard or processor AMD video driver update and if you instaled such a driver update there will be a number of check boxes, and if you had deselected these TI would'nt have been installed

• during startup, I get an error message 'Cannot find the resource file' how to restore this file?

  I had a virus fakespypro.  After it has been deleted I can't access my resource file at startup.  I need to reinstall windows vista to restore it?

  Hello

  This message is probably part of the scythe. Is there more information you can give about this?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• GFWL "Cannot find C\Program Files (x86)...\GFWLive.exe '?

  I am trying to reinstall GFWL on my computer after accidentally uninstalling it. However, when I run the Installer (which is 623ko according to Firefox), it says the above error when I try to run it, then it's not really do anything. Can someone tell me please how to fix this?

  Well, too bad. I went into Control Panel and repaired essentials WL. He just needs to update now.