Windows does not work
Hello
Help, please! my laptop wouldn't start this volume shows that it's from a load but it does not open after that and f11 does not work
I have a g6-2340ee pavilion
Running 64-bit windows 8
Help, please
Hi abanoubgad,
According to the flashing code which refers to the means, you have a BIOS corruption. You can try to restore the BIOS to see if that solves the problem. If this does not work then if you are in warranty, I suggest you call HP Total Care at 1-800-474-6836 in North America or visit this link if you are outside of North America.
If you are out of warranty, you can try to remove and replace the RTC or CMOS of laptop computer battery. If you are on a call of the HP Total Care guarantee that opening your laptop computer will void your warranty. Page 78 of Maintenance and Service of Guide will show you how to do this.
Thank you
Tags: Notebooks
Similar Questions
-
Defender of the window does not work.
I recently had the Vista antispyware 2012 the virus. I was able to get rid of it, but now the Defender window does not work. When I click on the icon I get a pop up msg: "failed to initialize: 0 x 80070006.» The handle is invalid. "How to operate?
But you should also read this:
Norton, AVG and McAfee, MSE will disable Windows Defender for dreaming of potential conflicts with their respective programs.
I hope this helps...
-
Photos may not be printed as a service that needs Windows does not work
One morning last week when we turned on the conputer lots of things had changed. I finally got my page online straightened out, but I could not print photos that were stored in the computer. When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work. And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course. Can you help me? I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.
Wendell Bard
Hello
1. What is the brand and model of the printer?
2. you remember to make changes on the computer before the show?Method 1:
You can perform troubleshooting of the printer and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Method 2:
If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaYou can also check out the link:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsFor more information, please see the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print -
Video preview of AE cs6 window does not work.
If the after effects cs6 preview window does not work. It shows just the black screen. I need quick help.
The example PIC: http://gyazo.com/d1219b0b95d7b2bd59e0980506db7c95
Why am I not surprised? Yes, the effin ' mess they made with the OpenGL drawing. To update your graphics driver and configure it properly. If it is supported, it should work, otherwise the program will / should turn off automatically. Trash the prefs after the pilot started day so AE scans again.
Mylenium
-
Satellite Pro C850-1EQ - 8 tiles Windows does not work
Hello
I'm desperate for help try to solve this problem with my laptop. When I got my laptop (at Christmas) the majority of the tiles on the home screen windows 8 worked, however after a week or two they have gradually stopped working, which is very frustrating.
When I click on a tile, it opens on the screen but the wheel continues to turn and nothing loads. I spoke to Microsoft online, however, they said that the problem with Toshiba as the laptop was purchased with Windows 8 already integrated.
Suggestions, they did involving anti-virus and updates did not work.
The most frustrating part is the Windows tile store does not work so I can't try to updates or new downloads to see if they will not solve the problem.Of course, I can use my laptop without the tiles, but I'm upset that I paid extra for Windows 8 and chooses the best part of it not working!
Any advice on what to do next would be great, thanks in advance.
Guess what? Try to restore the system Windows 8 back to the factory settings.
Here you will find documentation how to do this:[Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]
I recommend using the option * reset your PC *.
+ This option "Reset your PC" is useful when a PC is changed hands, or when you want to get a completely fresh start on a PC, without previous files of the selected configuration. +
+ The delete all, then reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a clean install of Windows 8, nor the default configuration of OEM factory, depending on the medium used for the operation. + -
Toshiba Satellite C55-C1K1 - 10 Windows does not work
Bought one for my mother and it has been a nightmare. The first was a problem with the keyboard that caused it typing random characters on the screen.
The replacement worked very well for about two months, now the touchpad has stopped working. I use the touchpad in the BIOS, so I know that is not a hardware failure. Tried all the drivers available, including the MOMENTUM (which shows a CRC problem) on the Toshiba site and nothing would work. Tried reinstall of keeping my files didn't work. Then finally took an image of the disk and installed a full Windows 10 and it STILL does not work.
So what am I, I wanted to now install Windows 8 on it and see which will work. Why Toshiba push 10 windows on people when they did not ensure that the software and hardware are compatible.
UPDATE.
I installed Windows 8 on the laptop, and STILL the touchpad does not work. Finally I found a thread on another site, that said that for another model of C55 - A (similar) of Toshiba, the solution has been updated to BIOS. So I downloaded the latest BIOS update and installed. Restarted after the update, and the touchpad started working again. Restarted a few times and it still worked.
Finally imaged original return 10 Windows operating system on the hard drive, and the touchpad and F5 (activeent/desactiveent) both work now. Toshiba needs to have a note sent with these laptops or to have a reminder. Two days lost on this nonsense.
-
ID of the window does not work
I checked with Xbox my Windows ID is * address email is removed from the privacy *, but when I type it in the live window it does not work. It references # is 1154236065. I can't have my xbox live to work, because the windows id does not work on your end. You can help.
Hello PaigeIsaac,
I suggest that refer you the link that will give you information about this below:
http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/sign-in.aspx
Thank you
Irfan H, Engineer Support Microsoft Answers. -
the Manager of Windows does not work
Tried to repair windows aero, it came up saying that windows manager did not work, have pop-up sayint that windows aero does not work
Tried to repair windows aero, it came up saying that windows manager did not work, have pop-up sayint that windows aero does not work
Aero does not
Suggestions:1 use this Microsoft FixIt support application:
http://support.Microsoft.com/mats/aero_effects_not_working/en-us2. start > searcg, enter services > press the Enter key > uac prompt > Desktop Window... > click it >
topic status, it should be... Has begun
under Startup type, it should be... Automatic
If it does not, look to the left, click on restart the service.
Scroll down to find theme, do the same as above.3 right-click on an open office space > Personalize > windows color and appearance > under colors, select Windows Aero > Apply > wait > OK
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Open a session on Windows does not work.
I have an old computer in the company of my old job that I wanted to use since I was allowed to keep the computer. The computer is configured with the domain s network under the name of the company. I was stupid enough to try to change it so it did not run under the domain of computer network (do not know why I had to play with him?). The computer asked me to restart the compuuter for the changes to take effect. Yes, I did. But now, when I Ctrl-Alt-Delete in the Welcome to Windows dialog box, it opens a new dialog box who want a username and password to get into the office. I tried to enter the old user name and password, and the new name of user and password I thought I had given, but now, the computer does not work. It is basically useless. The only options I have is to stop or cancel and no way brings me anywhere. Any help anyone? Please? Thank you
http://support.Microsoft.com/default.aspx/KB/940765/en-us
How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
-
Research of a window does not work (but only when the folder is indexed).
As the title suggests, I can look perfectly fine and find EVERYTHING in a folder with even the most detailed search operators, but only if I index the file. I had the same problem with Windows 7 as well and I don't know how to get around this problem. I think it may have something to do with the case in question is on an external drive but I still don't understand why this is the case. Indexing is supposed to make the search faster for a specific folder, but no matter what I do, Indexing always brings Vista only returning "no matches" for each search query. If I was of the same type in one letter, he found nothing.
Assistance would be greatly appreciated.
Hello
1 do these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlThose are the kind of prerequisites.
==================================
2. these should help to solve the issue and some tips to help.
Windows Search does not work or research are slower
http://support.Microsoft.com/GP/windows_searchTroubleshooting Windows Vista search & indexing errors
http://www.WinVistaClub.com/T24.htmlReconstruction of the Index in Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
How to enable or disable the search Index in Vista
http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
Improve Windows searches using the index: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions================================
Tips for finding files
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-filesHow to use advanced search in Vista Options
http://www.Vistax64.com/tutorials/75451-advanced-search.htmlHow to restore the page button on the Start Menu after installing Vista SP1
http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.htmlHow to restore the context Menu item search after installing Vista SP1
http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.htmlHow to create a shortcut on the desktop search in Vista
http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html----------------------------------------------------------
Win Key F opens advanced search
Searching in Windows Vista, part 1
http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-boxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Updates to Windows does not work
Windows Update does not work. I used the troubleshooting of windows update. So-called three problems have been resolved, but has not been set. one not fixed is, windows update error code 0 x 80070057 (2016-o4-19-T-07_25_28A. How can I fix it?
Home premium HP 635 laptop Windows 7
Switch your windows update setting to never check the updates temporarily
Restart the machine
Then you download this from your download folder run from there.
https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396Download the x 86 for 32-bit or x 64 for 64-bit
Install it and restart when prompted too after he did a search of stand-alone for updates that should not
take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
updates before running from the downloads folder.Once it installs and restarts
You can reset your updates affecting everything you had before default =...
Then check the updates manually.I think that the solution came from Softpedia and Joel_CS posted on this thread,
http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtmlYou need to scroll down to the poster of Joel SC is the last answer on this thread.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6 -
Upgrade Windows 7 Home Premium to professional.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Series of Windows does not work.
I bought a copy of windows 7 Edition family premium, when I built my computer but I poured water down his back and had to rebuild, so I did when I went to re - install windows, it says that the key is no longer active. This is the same computer as new hard disks because my last were pooched (so to speak) Please help!
You may simply need to activate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your question clearly to the support person.
If this does not work:
To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the button continue, after a short time, continue button will change to a copy button.
Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. (please do not change the report.)
-
Tab replace in the source window does not work
I followed a tutorial and I seem to do just as stated but my "crush" in my wind source tab does not work... any suggestions?
I'm guessing you haven't you source patched your track.
-
Help! Motion presets window does not work.
I tried to use the presets of movement for a project feature, but motion presets window does not display files or options. I see that the following: motion presets tab, the other options in the upper right corner, "Preview not available", save it the selection as a preset, the new folder button button, trash and the grey button apply. Someone knows how to fix this? The file is intact and in the right place.
Also, make sure you that you resize the Panel large enough vertically when you try this - I think that if the Panel is too short, you can not see this black double-sided arrow at all (the preview area is too large).
Maybe you are looking for
-
HP Pavilion X 2 10-n030ca: 10-n030ca HP Pavilion X 2 memory card
I wonder what type of memory card can I insert in the slot for memory card on the screen. Once inserted, can I use it as an external hard drive (e.g. drive d?)
-
HP g62-a60EM Intel Turbo Boost Technology driver problem
Hello! When I try to install HP drivers & driver Intel Turbo Boost Technology from the solution page I get this error: this computer does not meet the minimum requirements for installing the software. Can you help me with the solution how to fix this
-
Taskbar is vertical on the right side
How can I find the taskbar (horizontally) at the bottom of the screen?
-
Font size of Smartphones from blackBerry in the text of the Message
I have a BlackBerry Curve 9360. I found how to change the size of the font on my phone but I can't find how to change the size fond of the text of the message in any of my emails. Is it possible to do this operation?
-
Small deployment with computers not to a domain
Hello!I have 10 users (an area) that must use RDP or VMware View to connect to virtual machines.All virtual machines should be clones linked an image of 'gold '.Virtual machines should NOT be a member of a domain.How do I configure this?(the image sh