Windows DVD Maker-unable to burn a DVD

Similar Questions

• Windows Movie Maker, unable to set a time limit for slides

  transitions in movie maker

  I am doing a slideshow in movie maker. I can't select a length of time to the slides. Please help me...:)

  I am doing a slideshow in movie maker. I can't select a length of time to the slides. Please help me...:)

  ============================================
  To adjust the time on 'everything' clips... it must have the value 'before' photos are
  added to the timeline.

  Or for individual adjustments... (in the timeline), place the pointer on
  the edge of a clip and a red double arrow appear... drag the double
  red arrow to decrease the duration of this clip.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• What kind of cd/dvd is the best for my video Windows Movie Maker filled and how can I burn it?

  OK... I've published my Movie Maker presentation.  It will be presented via a laptop computer and projected.  First of all, what kind of cd/dvd I need?  I know that this information is listed under the HELP section of the Movie Maker program, but what do you propose to help?  AND THEN... How can I do to burn video on cd?  I got to the question re: given dvd vs dvd-video and was confused (sorry... it doesn't take much!).  In my mind, it's a video, but the explanation stated that in this format must then be read via a dvd player.  Finally it can be read that way and it would be nice to have this option, but my goal is now to have played through a computer laptop and projected.  I tried to save it as a video dvd last night, but after almost two hours of "transformation" (my video completed is approximately 3-1/2 minutes), I eventually escape and stop.  Can you guide me through this in simple terms?  Thank you!

  DVD-R Virgin should work for you, and you can
  burn the video DVD in Windows DVD Maker.

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Windows Vista - solve problems with creating a DVD-video using
  Creating Windows DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

• How can I move my movie from Director of windows for creating windows dvd

  I made my movie using the movie maker but cannot transfer to DVD was created to add the scene selection and menu title. Can anyone help?

  The following article might be worth a visit:

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

• XP Pro and Windows Movie Maker

  I am running XP Pro and have created a slide show in Windows Movie Maker, but cannot burn to a disc.  I get a message to insert a blank disc, which, of course, I already have.  I downloaded Windows DVD maker, but which requires an ISO file to burn and the Movie Maker saves the file under a MSWMM file.  Can someone help me?   Thank you.

  I'm guessing that you want to create a video DVD that
  will play in a free-standing DVD player.

  First you must save your Movie Maker project to
  the. WMV video format (.mswmm is the project
  folder and is only useful for a re-release in Movie Maker).

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  OK... now you have a video clip and you have DVD
  Software to burn a DVD video creation.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Not possible to burn a DVD on the Satellite A100-338 using Windows DVD Maker

  I have a Toshiba Satellite A100. I'm trying to burn a DVD using Microsoft Windows DVD Maker and a Sony DVD - RW. The laptop has a carpet * a DVD-RAM UJ-850 s ATA device.

  When I try to burn a DVD, a progress bar appears and is about 2% before the hanging.

  I also tried to format the DVD first, and which is progressing well before coming up with an error message saying that the drive could not be formatted.

  Anyone got any ideas? Am I missing something completely obvious?

  Hello

  the following things could probably help you with your problem:

  -> control if a new BIOS for your machine and a new FIRMWARE update for your DVD player are available. Update the BIOS and the player firnware
  -> use another applications burning like Nero, CDBurnerXP or other thing that is usually know work well with almost all DVD - RW readers out there
  -> use a DIFFERENT brands of DVD media because the carpet * a readers are really picky

  If all these steps fail, then it is possible that your drive is defective and must be replaced.

  See you soon

• M30X MultiDrive won't burn a DVD from Windows Movie Maker

  Hello

  My MultiDrive M30x will not burn the DVD from Windows Movie Maker and other applications.

  I also had problems with burning CDs (unbranded) of Windows XP, built in utility.

  The multidrive has problems with cheaper brand discs?

  Just to note,
  The laptop was to support guys three times until various issues.
  (1) the hard drive failed.
  (2) the multidrive has failed.
  (3) the motherboard replaced, due to power outages, it would not charge the battery, or recognize that the AC adapter is plugged.

  Note: The hard drive, not the fan made the most noise in mine!

  Thank you

  Hello

  As far as I know (i.e. pre-installed burning software Save now, drag-and - drop) disabled the option of Windows XP burning. In this case if you want to use the Movie Maker or Windows media player burning option, you need to activate this possibility.
  Please, go to the properties of the drivers (right click). Please select the recording tab. CD recording option on this drive must be marked.
  I use the software Nero burning and in my opinion he of one of the best burning programs. In addition, you should try different manufacturers CD/DVD because some CD and DVD is not compatible with some readers. Check the TDK CD and DVD. I never had no problem with these media.

  Best regards

• When you use Windows Movie Maker, I can only burn a CD when I want to burn a DVD, why I can't burn a DVD Slideshow?

  I have pictures saved on my hard drive and I want to burn a DVD, but Microsoft Movie Maker will only burn to a CD.  How can I burn to a DVD?  I was told that it is possible.

  The only version of Windows XP that has a DVD option in Movie Maker
  is the "Windows XP Media Center Edition 2005"...

  If you want to burn a video DVD that will play in a free-standing DVD
  Drive on an XP system, you need DVD Authoring software.

  There are many choices in retail, but to get started the following freeware
  may be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.Digital-Digest.com/software/download.php?sid=1246&SSID=0&did=2
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  If you decide to go on the road to detail... This article may
  be useful: he compares 15 of the most popular applications.

  Best video 2011, magazine publishing and software comparisons
  http://video-editing-software-review.TopTenReviews.com/

  Good luck.

• What type of DVD should I buy to burn my Windows Movie Maker movie? Also, I have Windows DVD Maker, but no DVD burner. What should I buy?

  I created a movie in Movie Maker.  I bought some DVD + r's - the correct burn the movie on?  Also, I don't have a burner, I thought that I did, I can only burn a CD what should I buy?  I don't have a Windows DVD authoring program.

  Hi rondah,.

  Welcome to the Microsoft community newsgroups.

  The type of recordable DVD, you need to use depends on your DVD burner, as well as on your DVD player. Some DVD burners can burn only to certain types of DVD recordable. For example, with some DVD burners, you can only record to DVD + R discs or DVD + RW or DVD-R or DVD - RW discs, while some other DVD burners will let you burn on all of these recordable DVD types.

  As long as your DVD burner supports burning to these types of discs, you can use Windows DVD creation to burn a DVD using one of the following types of recordable and re-recordable DVD media: DVD + R, DVD + RW, DVD - R, DVD - RW, and DVD - ROM. These recordable or rewritable DVDs can be either simple single laminate or single sided double layer.

  You should also consider the device you're using to play the DVD once you have engraved, if possible. Some DVD players and DVD - ROM drives play only certain types of DVD. To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

  For more information on which is a DVD burner and why do I need one? Visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-a-DVD-burner-and-why-do-I-need-one

  For more information on the DVD-Video burning / publish a movie in Windows Movie Maker / Windows DVD Maker

  1: burn a DVD-video disc

  2: DVD-video burning: frequently asked questions

  3: Demo: create a DVD-video disc

  4: change Windows DVD Maker DVD-Video settings

  5: solving problems with creating a DVD-video using Windows DVD creation

  6: which CD or DVD format should I use?

  7: disc burning: frequently asked questions

  8: publish a movie in Windows Movie Maker

  9: work with projects in Windows Movie Maker

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I burn a movie on windows movie maker to a cs that will play on my dvd player. It will only play on my computer

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  I scanned the photos and put them on a timeline, then I did a movie with windows movie maker.  I have published to read on the computer.  Now I am attached to burn.  I burnded it successfully, but he only plays back on my computer.  I was not given an option to burn to play on a dvd player to watch on a TV.  That's what I want to do.  It said disk error when I play on the dvd player.  I tried to burn to a cd - r and dvd - r.  I need help I have windows vista.

  =======================================
  Try to import the saved. In Windows WMV video file
  Creation of DVD and burn a DVD-video:

  Windows Vista - burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

• Burning defective DVDs of a movie created in Windows Movie Maker 2.6

  I did my camera video clips in avi format. format, & then enters a movie with windows movie maker 2.6, the movie plays correctly on my computer, but when you run in windows dvd creation, it will not 'Preview', & then burn on a dvd, this dvd in a jumble corrupt & Bacon of colors, the sound is ok. I did have a problem in the past. Any ideas?

  Thank you volunteers J for you help. I tried everything to get the dvd creation to work, but eventually I used the freemaker to redo the conversion in avi, & then used the freemaker dvd burner which worked perfectly, gave beautifully clear widescreen images. LTA 28

  =======================================
  You are welcome and thank you for the comments.

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• Windows Movie Maker-impossible to publish and burn a movie on DVD

  In creation of DVD, I meswsage: "the temporary directory is not accessible.

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  I never had this problem before. What should I do to be able to burn DVDs from my MOVIEMAKER

  =================================
  I can only imagine that some of your sources files have
  have been moved or deleted.

  Try Publishing (save) your Movie Maker project
  in the format .wmv movie to a folder on your hard drive
  drive. Then import the .wmv video in DVD creation.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Windows Vista-
  Creating Windows DVD
  Burn a video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I try to burn a DVD with Windows DVD Maker, he says that the file is not a valid project create DVD file. Why?

  When I try to click on add items in Windows DVD Maker, it will allow me to select a file, then it tells me that the file is not a valid project create DVD file. Why?

  What is the format (extension) of the files of the selection?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.