Windows Essentials will not install

Similar Questions

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• my windows updates will not install error d 000737

  my windows updates will not install error d 000737

  Please visit: How to reset the Windows Update components? Carey Frisch

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• Office 2007 SP2 on Windows 7 will not install

  Recently upgraded from Vista to Windows 7. After that, a lot of problems to do Office 2003 and 2007 to play nice. Finish by uninstalling and reinstalling both. Now, applications seem to be happy, except for Word 2003 AND 2007, eager to relocate whenever they are launched. The biggest problem now is that the Office SP2 will not install. Tried registry cleaning, download .exe standalone and as an administrator and also using the tool PatchRegCleanup - x 86 .exe (which gives me a message "productcode must be determined" and makes me want to go out). Yes, Office 2007 disk is inserted. All other updates installed correctly.  Any help appreciated.

  It worked for me: http://support.microsoft.com/kb/971058. Thanks SpiritX and t. guenoun

• Brand new Aspire XC - 603G (ACX - 603 G-UW31). Windows 7 will not install in Legacy Mode

  Hello

  I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.

  I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.

  The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...

  Any ideas?

  Thank you, Nick

  

  All,

  I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).

  Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.

• Windows 7 will not install PNY 1 GB flash drive. (who has worked in the past)

  When I tried to use my flash drives today that they do not work.  When I go to Device Manager it says the driver is not digitally signed. (It's the Microsoft supplied driver). I tried the update and find a driver who says that it is digitally signed, but when I try to update it will not install because it is not digitally signed.  Help!

  Hello

  1 what other readers USB not detected on the computer?
  2. don't you make changes to the computer before the show?

  Method 1: I suggest you try the steps from the following link:

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-HK/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Also I suggest you to update the chipset drivers.
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows live essentials will not install in windows 7-no error message

  I just put a new hard drive in a computer and loaded Windows 7 with no problems, but when I went to install Windows Live Essentials it would not install, no error message, nothing.  I did a test of compatabiliity and had a vague message on a conflict, but no explanation as to what the issue was other than that.  Can someone help me?  Thank you.

  in response to your first question. probably not.

  However, I could solve the problem by downloading another version of Windows Live Messenger I had on the personal computer.

  Thank you.  Phil

• An update of windows 7 will not install my system hair upward

  I have a Dell Studio 1555.  everything was fine until the update for daylight saving time.   It downloaded, but I can't install it.  My system has just tried to install it forever. I can get out of the installation without end by closing and removing the battery, but it will happen when I try to quit again.   I changed installation mys to ask aboiut installs but I see no way to remove the file that is there and Windows always try to install again.

  any thoughts?

  What he says is that these updates of advanced savings are honestly not necessary for 99.9999999999999999% of humanity.

  You can hide without any problems in the long term.

• Windows xp will not install updates

  I did steps 1 - 10f... updates of windows will still not installed. Stopped after attempting the installation of the update.

  1. IN the stop step #9 => did you uninstall .NET Framework 4 Client Profile , or you go to step # 10 has?

  2A. When you started to see #10f, were KB2570947, KB2616676, KB931125 (update root certificates) & the Malicious Software Removal Tool , the selected updates to be installed?

  2B. what (s) [including any error number] you got during the installation of the system failed?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Notwithstanding these questions...

  OPTION A: Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B: There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * or your subscription has expired since or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the below: go to OPTION C below.  A repair install won't help!

  Microsoft is sponsoring free, online (third!) for questions: http://supportservices.microsoft.com/support/services/virus_malware_removal

  OPTION C: Your misguided use of Wise Registry Cleaner, cleaner CCleaner registry and/or Ashampoo may have "screwed the dog" here.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Note: The computer must not be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  1. uninstalled the .NET Framework 4 Client Profile
  2. one. Yes, these updates have been selected
  b. same error as before.  'A problem on your computer is preventing the updates being downloaded or installed' no error number.  Just say install again or try the troubleshooter.

  Option C seems the best option.  But if I get support should I only list the an a security update for windows xp kb2570947?

• Windows XP will not install. Where is the file asms? I washed the CD and it is in the drive

  I have installed a different hard drive and tried to install a legitimate copy of Windows XP.  He stopped at 39 minutes and request for the file 'asms '.  The CD is in the drive, why it will not continue?

  LMB

  Hello

  1. What is the exact error message?
  2. were you able to install Windows XP without any problems previously using the same CD?

  Read the following article which can be useful:
  "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
  http://support.Microsoft.com/kb/311755

• The 3rd part of a windows update will not install. What can I do?

  Hi there Microsoft overlords. I was wondering if you could help me. I've seen a similar thread on the final update not install it, but I don't know enough about variables in order to know if it is a minor or major problem and how to fix it. Any help woul be appreciated.

  I am running Windows Vista on a Toshiba Sataleite Pro 2010. I ran two FULL virus scans last night, with Avast free protection and another with Windows Essentials I think. Windows has found a number of serious threats that I hit the function apply on. Then I did a scan with Avast.

  Then after I finished the second virus with Avast scan, the laptop began something strange. The screen went black shortly after it (not immediately think"I") and he began to make a safe-mode-esque all programs, including the documents and my downloads of loading. He said it was a bookkit or a rootkit or something similar. I don't quite remember.

  In any case, I leave this list of command of rootkit series go on a little I don't know initially, he said "I want to check all the files of rootkit or bookkit for security", yet once I do not what that.

  I let happen to 7% completed which took between 30 minutes and an hour to reach. I then press ESC to cancel the process which he allowed me to do.

  After that, the pc began to restart dozens of times trying to reinstall a 3rd update of windows (which remains at zero percent).

  If it's any help I had a windows update for last night. I had to have one, but I postponed it for a few hours.

  Also, I think that the laptop can (MAY I'm not sure) ran out of power last night to stop.

  I think I let him run out of power because he was stupid before you stop, even if I can't be sure.

  Thanks for any help, if you need more information do not hesitate to answer.

  p.s. I tried to go to SafeMode to start again, but now it is useful. Safe mode programs load then IMMEDIATELY (until I can get to s a start menu or anything like that), she goes in this cycle to shutdown/reboot/update.

  Thank you. Helllp me :-)

  My apologies. I don't know much on the PC at all and I couldn't remember what I had done or read yesterday evening.

  Fortunately, my laptop is now fixed. I had nothing too precious that I had not already supported so my brother reinstalled windows on it again and it is fine now.

  Thanks for the help. Soon :)

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• Windows 7 will not install on my hard drive SATA III, even if the installer and menu of the BIOS are localization.

  The controller is enabled for all SATA connectors and the drive is one of the SATA 3.0 Gbit/s ports, I've heard is a way to get through. However, it did not, either. Can anyone help?

  Here is what I am dealing with, set up a few hours ago:
  -Intel DH77KC card
  -Intel Core i7 - 2600K 3.4 Ghz processor
  -Disk hard Western Digital 1 TB black
  -Corsair Vengeance 16 GB of Ram
  -Corsair TX650 80Bronze
  -Windows 7 Home Premium 64-bit
  It starts, and then Windows 7 gets no more than it will not be installed on the hard disk. I can't make a new partition, either, nor can I format the drive in the window. The BIOS settings do not exactly help because I'm not using RAID and FDI does not do.
  Maybe there's something wrong.

  Try to remove 3 branches if theyre 4 GB each. See if it installs. If so, put the 3 branches after windows has been installed

  This BIOS is on it at the mo?