Windows Explorer-constantly does not

Similar Questions

• Windows Explorer (Vista) does not display the complete list of Favorites

  In the current w / last week, my IE (9) does not open a Favorites folder.

  
  (It is large enough - maybe entered 800 (I can't check. beak of this problem).)
  Then I noticed that Windows Explorer will never complete if I asked him to show the contents of this folder.
  (It shows a lot, but then never finished.)
  Worse, even if I peut stop it, if I try to go to another folder, it tries to display the original folder again.
  Worse, if I kill this window, the explorer.exe process continues to face of ~ 100% of my (two processor!) CENTRAL PROCESSING UNIT.
  
  Kill this process is not (even later) to get me a new Windows Explorer, & so I have to shut down or restart.
  Malwarebytes Pro says that my system is clean.
  .. .as is dskchk (sp?)
  I tried to isolate the problem by doing a binary search:
  • Find ~1/2 files in the offending file.
  • Move them to a new folder.
  • See if there is still an offending folder.

  .. but it took forever, because I keep falling on this problem that I try to do this last step.
  I'm running out of ideas!

  Hello

  Follow the following troubleshooting methods:

  Method: 1

  Start the computer in safe mode with network and then try to open the Favorites folder.

  Startup options (including safe mode)

  Method: 2

  Configure the computer to clean boot and check how it works.

  To configure the computer clean boot, follow the steps in the below link:

  How to perform a clean boot

  After you clean boot troubleshooting, follow step: 7 article to reset the computer in normal mode.

  Method: 3

  also, I would sugest to open internet explore mode no. Add-on and check how it works.

  Open internet explore mode no. Add-on

  a. click the Start button

  b. click on all programs

  c. click on accessories

  d. click on system tools

  e. then click Internet Explorer (No Add-ons)

  If disabling all add-ons solves the problem, you can disable all add-ons and then put modules only as needed.

• When you plug the hard drive, Windows Explorer says does not not and closes all applications

  When I connect my hard drive (which has more than 70 films) my watch windows Explorer does not and it closes all active applications. I can't open my disc... hard help me...

  * original title - when I connect my hard drive (which has more than 70 films) my show windows Explorer does not and it closes all active applications. I can't open my disc... help me hard... *.

  Hi Adnot

   

  Method 1:

  I suggest to connect the hard drive, then try to run the security analysis. You may need to disable all autorun feature, if you use the drive. Then, try to perform security analysis and check if you have any viruses or malware present.
  See the link below for the analysis and verification.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  You can also perform a clean boot and check if you can open the hard disk properly. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• In Windows 7, selecting "Automatically expand to current folder" in Windows Explorer, it does not work

  In Explorer windows (win7... new laptop...?) activating the box "Automatically expand to current folder" does not work. I went through tons of forums and no one can answer this recurrent problem.

  If I navigate through the folders in the left pane using the arrow keys: the right pane should follow! and display the contents of the folder.

  What is the difference with the guys who claim that this box, it's employment and tons of guys for whom this box makes no difference at all including me?

  Please provide a solution! Many of us will enjoy!

  OK, so now that I've been messing around with this problem its as magically started working for the first time (within 6 months) on my personal laptop...

  I think I know what fixed it. I remember toggling the 'automatically expand to current folder' option in right mouse click an empty link in the navigation pane (it was already placed on). When I did it first, it did not work. I remember deselection and then selecting once again, and it still doesn't work. I went back to folder options and (this is where it gets fuzzy) I think I've deselected and not selected again from there, still no luck.

  So I opened the registry to verify automatically expand them to current folder key is set to 1. It was so I let fall, don't make any changes to the registry. I posted the above comment and left my PC, still running, no reset.

  9 hours later I come home and hey presto all his work.

  Go figure.

  Now that his work, using the Folder Options box still does not work with it all - either to the value on or off. Using a right-click in the browser window works, but the effect is not immediate. We need to change at least a folder selection (double click on a folder) in the file list pane before the change takes effect.

  I'll test this fix some information on other portable dozens that have this problem and present the results here.

• Windows Explorer.exe does not often

  Recently and I have no idea why, "explorer.exe" becomes "unresponsive" at random times when I use my Dell Inspiron 1750 running a 64 bit version of Windows 7 Home Premium. I was not able to produce this problem constantly, but it happens quite often. I can't see my taskbar, start menu or the desktop. I have to manually complete the process via the Task Manager, and then run it again to explore to rework and all good. And then finally, it happens again. Please help me. Thank you.

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The Windows Explorer icon does not display these last places (story) more?

  When you right-click on the icon in Windows Explorer in the taskbar, it will display recent places I visit (history) and favorite folders, I check-in. But it always shows the Menu, like "unpin this program from the taskbar".

  Anyway, does not show the recent locations on the rise more, why?

  It looks like recent locations are corrupt.  Try these instructions to reset the:

  http://www.mydigitallife.info/2010/07/04/fix-Windows-7-jump-lists-missing-or-does-not-display-recent-items-or-pinned-files/

• File in the windows Explorer 8 does not open

  Hi everyone, I hope that all do you well

  I have problem with my file Explorer in windows 8, that it does not open when I click on file Explorer it stop for a period and relatives and so on

  the hope of finding assistance; Thank you for all

  Hello

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  Have you read this information from Microsoft on the repair of errors and corrupted system files?

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• Hanging Windows Explorer and does not

  Hi, I have problems with Windows Explorer of my windows vista PC computer

  This prevents the hanging and freezing

  It is 32 bit Windows Vista Home Premium

  I tried to clean the programs, they don't do much

  When I turn on my PC, Windows Explorer is REALLY slow, so I have to disconnect and turn it back on, then it is not as slow

  It's a quad core prosessor 3 GB drive hard ram.138 GB

  31 left GB in the hard drive

  HP Pavilion A6300 A6355UK

  This gets really annoying, and I want to start working normally again.

  Help, please

  Thank you

  Often, a certain instability in Windows Explorer is due to the defective shell extensions and addons.
  Consider using Sysinternals Autoruns or ShellExView. Disable Add-ons and non Microsoft shell extensions and verify the behavior.  If he went, reactivate the disabled extensions/add-ons, one at a time and see if you can identify who may be liable.

  Try a clean boot, or boot into safe mode.  The behavior persists?

• Open Windows Explorer, but does not display the files.

  Whenever I try to access a folder or even something like the trash, a computer or control panel, it takes forever to finish loading and nothing shows. Sometimes not even the Panel on the left. For some reason any this has also affected the folders on my desktop. Looking at them, they look empty, but I can start properties and still see the size and the quantity of files and still run programs in a separate program (aka the steam games). As long as I don't have to go through a menu that I can get to a program. Windows Vista Ultimate 64-bit.

  To do an upgrade of the repair to the problems of Service Pack installation, read this and follow:

  Looking for a difference in numbers/Service Pack levels.

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to exchange the disc for a later version that includes the missing Service Pack.

  On your installed operating system Service Pack level cannot be greater than what is on the disk.

  Click Start > right click on computer > properties > system > it will tell you which SP you have installed.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the installed OS has the disk with Service Pack 1 and Service Pack 2 > uninstall SP2 installed operating system > repair install upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  Mick Murphy - Microsoft partner

• Hanging Windows desktop and does not, online or off the power. I have to use the task mgr constantly to "shake" the windows to startin

  Original title: Hello I have an xp pro sp3 dell dimension 2400. Hanging of Windows desktop and does not, online and off.

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  Hello I have an xp pro, sp3, the dell dimension 2400. IE 8 for the internet.  I use McAfee through my SP which is AT & T. Windows Office suspended and does not, online or off the power. I have to use the task mgr constantly to "shake up" windows start and sometimes, it doesn't work anymore and I have to restart.

  I have used all sorts of anti-virus programs and can ensure that it is NOT a virus. It is not my regestry, all updates are current. I keep a clean machine.

  I have xp of the process and have nothing wrong.

  Sometimes my icons will disappear out of my office, but always come right away. Other times, I get a message that says stop running this script. a script on this page slows down IE run slowly. It is for the most part on Face Book, BUT sometimes also on other sites, like google mail. Yahoo mail, groups and news.

  Any suggestions would be greatly appreciated.

  Thank you! :>)

  The image (it back up to an external drive as full image) and reinstall Windows XP, update, drivers and everything.  Install any plugins that you NEED to do all that you see here that the bat hurt.  If the problem no longer exists, something has gone wrong with your system from before (corrupt files or your cleaning is not as complete as you think) and if the problem persists - probably something to do with the material. In all cases, you can return to the image if you wish.

  To the extent wherever it is the registry, I must ask, * how * you have come to this conclusion?  Not that I'm defending something - I was wondering what you did to decide who is not your registry database?  (Side: I agree with you.)

  That's what * I * would call cleaning and optimization of a Windows XP machine:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  "titch hill" has written in the new message: * e-mail address is removed from the privacy... *

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  You double click on an icon to open Internet Explorer?

  If so, right-click on the icon and select Properties.
  Select the shortcut tab.
  Change the value of the "run:" Maximized field
  Click on apply, then OK

  Next time that you double-click the icon, it is a maximized window will open.

• After that the Windows update, Mozilla does not work.

  After an update of windows, Mozilla Foxfire does not work. I can type in the address of the site, I would like to see, and absolutely nothing happens after clicking on "search"... It makes me wonder if the update of windows had something in it that blocks for the internet mozilla foxfire 'explorer '...

  Try to start Firefox in safe mode:

  • Firefox in safe mode

  You can also try resetting Firefox to default settings:

  • Reset Firefox

• My explore menu does not display the drives. How can I solve this problem?

  Original title: hard drives

  My explore menu does not display the drives.  How can I solve this problem?

  Hello fpiraro,

  Thanks for the return of the response.  Please visit the link below and let us know the status.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  • Microsoft Windows XP Professional
  • Microsoft Windows XP Home Edition
  • Windows Vista Business
  • Windows Vista Business
  • Windows Vista Home Basic
  • Windows Vista Edition Home Premium
  • Windows Vista Starter
  • Windows Vista Ultimate Edition
  • Windows 7 business
  • Windows 7 Home Basic
  • Windows 7 Home Premium
  • Windows 7 Professional
  • Windows 7 Starter
  • Windows 7 Ultimate

• Windows Media Player does not recognize my Archos 5 internet tablet

  Original title: windows media player

  All of a sudden my windows media player does not recognize my Archos 5 internet tablet when I plug in the USB connection cable. I have the media player 11 and this is what is recommended. I do everything according to the book and he just keeps telling me to connect a device.

  Hello

  ·         Is the device is detected in windows Explorer (start > my computer)?

  ·         You are able to see the device in the Device Manager?

  ·         What happens when you try to connect to the device? You get the error message?

  ·         Did you try the device on another computer or another USB port and check if it works?

  ·         Remember to make changes on the computer before the show?

  I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you to uninstall and reinstall Windows Media Player 11 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=8163

   

  See: installation and removal of the drive

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

   

  Method 2:

   

  If the device is not detected in Device Manager, or if you find any yellow exclamation try to uninstall it restarts the computer and check if that helps.

   

  How to configure devices by using Device Manager in Windows XP

  http://support.Microsoft.com/kb/307970

   

   

  Method 3:

  Also run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

   

   

  You can also check out the link below:

  http://www.ARCHOS.com/support/support_tech/FAQs/en/faq_Archos5.html?country=us&lang=en

• Explorer.exe does not start automatically

  HII,

  When I restart my laptop is wrong on the desktop whenever I need to run explorer.exe thru new task (from the Task Manager)
  I also put explorer.exe at startup option still i m facing the same issue.
  How to solve this problem?
  

  Hello

  Logon as administrator

  Regedit start - type in the search box - CONTROL top - right Click-RUN AS ADMIN

  Navigate to this key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the RIGHT PANE, double-click SHELL - value data and the entry should be explorer.exe.
  
  If you have ANY other information it please write and post here and of course change to the above

  Close Regedit and restart.

  Windows Vista explorer.exe does not start at startup
  http://www.WinVistaClub.com/T231.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.