After that the Windows update, Mozilla does not work.

Similar Questions

• After that the Windows System Restore does not work

  So I tried at my peak of windows 7 on the eve, but he throws it gives me an error saying "can not find script file c\windows\run.vbs" system restore other than that it was just a black screen with my mouse on it. Any help would be appritiated, thank you.

  You are able to access safe mode?

  If your computer has a single operating system installed, press and hold the F8 key as your computer starts or restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If you access the safe mode, you can follow the procedure described in the following link to undo the restore point:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/undo-system-restore

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• continues to tell me IES3H must be installed, and that the Windows Hosting Service does not work?

  IES3H no - where on the computer, continues to tell me host Service Windows does not work, and that Windows will notify me when a solution is found. Very confused.

  Hello

  Please see this thread in the IE Group on this subject:
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/b2fefc18-79a3-4C3C-a9de-54d1a2062183 Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• After that the keyboard of recovery does not work properly

  some keys work and some do not. After I corrected it has stopped working. It's a toshiba laptop with a standard keyboard ps/2.

  
  
  and worst of all is that f8 and f9 is not working so I can't get back again

  Hello

  After perform you a recovery, you must install the latest updates of driver from the Web site of the manufacturer of the laptop computer for your model and operating system number.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Click on the "Download" tab at the top on the link above and follow the instructions.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And with a Toshiba, you press 0 (ZERO) to START to begin the recovery.

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletinDetail.jsp?soID=2737864&PF=true

  "Press and hold the 0 (zero) on the keyboard key while turning on the computer."  Release it when the recovery warning screen is displayed. »

  See you soon.

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• My product key on a new installation was invalid so then I activated by phone... now when I use windows update it does not work correctly

  My product key on a new installation was invalid so then I activated by phone... now when I use windows update it is not working properly because it says that I don't have a genuine copy of windows... But it seems that the updates don't come down... is it ok to work this way?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
   
  Windows security updates will continue to come down the pipe under automatic updates, but you cannot access the General updates until the system to validate.

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• After a Windows Update, that the several apps shortcut does not work, I went back to the start screen.

  Shortcuts to programs of work OK, but two shortcuts to applications of games and two apps printer briefly displays a title screen and then return to the start screen.  I tried to remove and then reload applications without success, I ran Paretologic Health program several times, tried to defrag the drive is done everything to nothing.  Troubleshooting Windows detects no error either.

  It worked for me in the past...

  Run the Windows update repair tool Control Panel / troubleshooting / view all (in the left margin)

  followed by the two of them, even if the first says no found error.  Maybe 15 minutes each.

  Form a command prompt (admin)

  DISM / Online/Cleanup-image /Scanhealth
  DISM / Online/Cleanup-Image /RestoreHealth

• Windows update website does not work

  Hello...

  I recently had a problem requiring a reinstall instead of XP Pro 32-bit to backrev to SP2. Basically I have been running SP3, but was constantly reminders, insistence, etc to update to IE8, and after continuous pressure, I finally said 'ok' and went ahead with it. And he threw quickly across into itself.

  Accordingly, I did an uninstall of IE8, but concluded that IE7 could no longer work. After checking for a solution and try the patches recommended, nothing has worked, and since I'm at SP3, IE7 could not be uninstalled (this is possible for SP2). There is no information available for SP3 uninstall, so I had finally "repair" XP by doing a reinstall instead of booting from the XP SP2 cd. It worked pretty well, and everything was back to normal, even if I was now running IE6.

  So, I had the ACR IE7 on your site and tried to install it. There is no problem during installation - no message of error - but after the reboot. I was unable to open IE7 anyway. ERGO, I had no choice but to uninstall it. Thank gawd I rarely use IE; nothing else was touched and Firefox & Acoo both work very well.

  To try to resolve the problem of IE7, some "corrections" for "IE7 will not run" involve open IE7 and perform certain tasks. Seems to be quite a task: IE7 will not run, so go ahead and open and... Riiight. Anyway, I don't have the tools of correction for reset and disable add-ons, but unfortunately, they specify that I must first install SP3. No way will reinstall SP3 until I see IE7 work @ SP2; Simply much too, it would mean an extra effort to do a re-install of SP2.

  I'm ready to install other patches, although I noticed that nothing has been downloaded after I backrevved to SP2. As a result, I went to windowsupdate.microsoft.com do updates manually. He installed the required ActiveX control, analysis, and then returns the following message is displayed:

  "The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues) "

  So I am now running SP2 and everything seems fine, except that I can't apply updates, nor can I run IE7.

  Virus Info: this machine is running Microsoft Security Essentials and AVG Antivirus, and both are up to date and returned "no items found" after a FULL analysis. I also did a manual FULL scan using Malwarebytes Anti-Malware (also updated to current rev & GIS files) and it is an executable placed under my login in Documents & Settings of DiVX, that triggers an application running ads when I open the DiVX player. He was NOT in the Windows directory. AVG and MSE up-to-date and run full scans every night, so if you believe it is a virus, I would need proof. You would also be admitting that MSE is wrong; I've been running for more than a year.

  Caution: again, I won't install SP3 & IE8 until I see that IE7 will run correctly @ SP2, which - at least in part, it will apply updates that I can't apply. Please spare me the answer "well, updated to SP3 and IE8 first, and we'll see if that fixes it. If you're wrong, I'll be right where I started and will have to go through the process again to get where I am now, lose a lot of time in the process. I don't know if it is a community site, but please, only a response from someone who can provide real help for the problem of why the update site simply says there is a problem, but does not provide any additional information about the error.

  Yes, I know that XP will support discontinued from April 2013. It is now Sept 2012.

  Thanks in advance for any help legitimate that you can offer.

  Support for XP SP2 took end July 2010 - http://support.microsoft.com/gp/lifean31

  The Windows update website no longer unless you are at SP3. I did a new install of SP2 and verfied. The mistake that almost everyone gets in these conditions is 0x8024400A. I think that if you look at the WU error page again you will see this code.

  You say that you will not install SP3 so we cannot help. You are committed to a comprehensive system of faults for the life of the PC. If you change your opinion then we do know and I/we will try to help.

  BTW XP died in April 2014 not 2013 - http://www.microsoft.com/en-us/windows/endofsupport.aspx

  Tricky

• Why Windows Update service does not work on my computer?

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  Suggestion 1: Get rid of Norton and Spybot Search and Destroy.  I do not recommend Norton/McAfee products, especially the suites (I recommend NO suites - simple is better.)  Spybot has been a good product, but a few years back, he just stopped doing as well.

  Suggestion 2 (cumulative, not necessarily independent - but maybe): cleaning of your Windows Update stuff...

  All the following items in the order shown - no matter what protection against that, you think you have.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
  
  regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after this - say parts of the former post once again (no need to conduct a new analysis of malware) from:

  "Now reset your Windows with this FixIt components update:

  ... but stopping at... «STILL no?'.»»

  Back - let everyone know what is happening.

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• After upgrade the iOS 10, HotSpot does not work

  Can't wait to post that iOS 10 update, I could not access the personal hotspot option.

  I was previously using iOS 9.3.5 and hotspot worked as usual, appearing as an option under cellular. I had used it to connect my other phones to the internet and the laptop, because I need it to work.

  I did the update iOS through iTunes 10.0.1 without trying the OTA. Now, I get this:

  

  I already reset my network settings. Twice. The option appears just after the reset and is absent. I am looking a 9.3.5 downgrade until the issue is resolved.

  Many people seem to have this problem, through a variety of Telco. In Aus, the problem occurred on Virgin Mobile, with workaround seems to be; switch down from 4G to 3G.

• the Windows installation (repair) does not work on a normal mode due to the error on blue screen and I can not access a SafeMode more due to the installation of windows

  Hi everyone, my dell inspiron 6400 does not work in normal mode due to a blue screen error 0x0000007E, 0xB8D4278E, 0XBA4CF038 and 0XBA4CED34. It also shows an error igxpmp32.sys. Unfortunately, I complicated issues when I tried to fix it by using a windows installation disc. Now, windows setup wont run on normal mode the blue screen still exists and I can't use safe mode again as custom configuration windows running on safe mode. Help, please

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you disconnect all external devices and third-party drivers such as mentioned in this article and check if the problem persists.

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Vista - Windows Update service does not work

  Windows Vista 32-bit sp2... Its said that for a while and I think I got malware or spyware, virus, because updates have been down.

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner